Symmons 363TB-18-STN Installation guide

Category
Wall & ceiling mounts accessories
Type
Installation guide
Dia®
Model Numbers Specification
Accessory Suite
Operation & Maintenance Manual
365DTB-18, 365DTB-24, 353TB-18, 353TB-24,
353TS-22, 353TR, 353RH, 353DRH, 353TH,
353TP, 353TPC, 353SD, 353-SD2
Note: Append appropriate -sux to model number.
Modifications
-STN Satin Nickel finish
353DTB-18 18" Double Towel Bar
353DTB-24 24" Double Towel Bar
363TB-18 18" Towel Bar
363TB-24 24" Towel Bar
353TS-22 22" Towel Shelf
363TR Towel Ring
353RH Robe Hook
353DRH Double Robe Hook
353TH Toothbrush Holder
353TP Toilet Paper Holder
353TPC Toilet Paper Holder
353SD Soap Dish
353-SD2 Soap Basket
All premium accessories constructed from metal
materials, plated in standard polished chrome finish.
Limited Lifetime - to the original end
purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.
Warranty
Dimensions
353TR
353RH353DTB-18 & 353DTB-24
353TB-18 & 353TB-24
304.8
[12”]
457.2
[18”]
609.6
[24”]
457.2
[18”]
609.6
[24”]
Replacement Parts
Description Part Number
Mounting
Hardware Kit
Less Bracket
RA-017
Mounting
Hardware Kit
With Bracket
RA-026
Note: Dimensions subject to change without notice.
Dimensions
353SD
353-SD2
353TH
353TS-22
353DRH
353TP
353TPC
238
[9.37”]
62
[2.44”]
148
[5.83”]
10
[0.39”]
60
[2.36”]
Installation
1)
Measure and mark centerlines
for mounting bracket instal-
lation using dimensions on
page 2.
3) With mounting brackets in
position, secure to wall using
screws.
Use bracket as screw template
5) Hang top of accessory on
mounting bracket. Lower into
position.
2a) Dry Wall Option:
Place
mounting brackets into
desired position. Using
brackets as a guide, careful-
ly drill 5/16" holes into wall.
Remove brackets and install
anchors.
2b) Stud Option: Center bracket
on centerline.
Using brack-
ets as a guide, carefully drill
3/16" holes into wall.
Note:
365DTB-18, 353DTB-24, 353TB-
18, 353TB-24, 353TS-22 only.
Make sure both centerline
marks
are level.
33
1
1
2
OR
Note:
For plaster walls 1/2" thick or
less, insert toggle tool into
toggle to secure behind wall
prior to installing accessory
trim.
2
1
1
OR
1
2
4) Secure with set screw.
1
2
353-SD2 Only:
Carefully drill
5/16" holes into wall and install
anchors. Secure to wall using
screws.
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621
Copyright © 2021 Symmons Industries, Inc. symmons.com gethelp@symmons.com ZV-1098 REV L 031022
Troubleshooting Chart
Problem Cause Solution
Finish is spotting. Elements in water supply may
cause water staining on finish.
Clean finished trim area with a soft
cloth using mild soap and water or
a non-abrasive cleaner and then
quickly rinse with water.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Symmons 363TB-18-STN Installation guide

Category
Wall & ceiling mounts accessories
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI