2. Petromax
  3. Assembly of the legs of the Gas Table

Petromax Assembly of the legs of the Gas Table User manual

  • Hello! I've analyzed the provided user manual, which details the assembly of the support legs for the Petromax Gas Table models ge45-s, ge45-s-30, ge45-s-37, ge90-s, ge90-s-30, and ge90-s-37. The manual includes instructions on fitting the legs, adjusting for uneven surfaces, and using the table with or without the legs. Ask me anything about assembling the legs or any other topic covered in the document.
  • What should I do if parts of the Gas Table are defective or missing?
    How do I attach the support legs?
    Can I use the Gas Table on an uneven floor?
    Can the Gas Table be used without support legs?
Insert the support legs into the slots of the Gas Table,
tighten them using the clamping levers and set up the
Gas Table (Caution: the support legs can be inserted
into the Gas Table at dierent angles).
The legs of the gas tables can be attached in such a way
that the table stands straight even if the oor is uneven.
To do this, simply do not push the desired leg all the way
out, but push it correspondingly less and then screw it
tight.
Make sure that you choose an even, stable and reproof
surface. Otherwise the long legs of the Gas Table could
sink into the ground, making the table stand unevenly.
The Gas Table can also be used without support legs.
ge45-s | ge45-s-30 | ge45-s-37
ge90-s | ge90-s-30 | ge90-s-37
Assembly of the legs of the Gas Table:
Do not operate your Petromax Gas Table if parts of it are defective or missing. It is important to observe all
the instructions in the section Safety instructions and warnings in this manual.
/