Breeze33 BZ33-WB Mini Split Wall Bracket Installation guide

breeze33.comDue to continuing product improvements, specications may change without notice. 02/23

Mini Split Wall Bracket

INSTALLATION GUIDE

Installation Instructions

Properly inspect the wall or supporting structure that it is secure and will be able to support the wall bracket and unit.

Note: Until installation, product should be stored in its original packaging and kept away from any weathered conditions.

Level and x the supplied crossbar to the wall. Use

plugs at your discretion.

Adjust the distance of the arms to the wall using

the nylon screws.

Place the washers on the horizontal arms.

Fasten dampers at the corner with at side facing

the back.

Secure to the crossbar with proper nuts and bolts.

1 4

Using the appropriate nuts and bolds, secure the

hooks to the upper arms.