2. Hallde
  3. RG-400

Hallde RG-400 User guide

  • Hello! I've reviewed the user guide for the HALLDE RG-400 food processor. This document outlines how to combine different feeders and cutting tools for various food preparation tasks. It also describes two types of feed cylinders that are used. I'm ready to answer your questions about the RG-400 and its components.
  • What are the two types of feed cylinders used by the RG-400?
    What type of products is the first type of feed cylinder used for?
    What types of feeders can be used with the second type of feed cylinder?
You can combine the RG-400 in
many dierent ways.
Depending on what you plan to
use the machine for,
you select the appropriate type
of feeder and cutting
tool from our wide range of
cuts and dimensions.
The RG-400 uses two types
of feed cylinder; one is for
the feed hopper and has
two wedged-shaped feeder
compartments which help to
press the food against the cut-
ting tool. It is used for round
products that doesn’t require
pressure, such as potato and
onions.
The other is for the manual
feeder ergo loop, pneumatic
push feeder and 4-tube insert
and has three internal knives
that fix and divide the food
when preparing.
hallde.com
RG-400
Combinations
© AB Hällde Maskiner Art.nr. 13057
RG- User Guide
Feed
cylinder
Feed
cylinder
Feed
cylinder
Feed
cylinder
Feed
hopper
Manual
push feeder
Pneumatic
push feeder
Tube
feeder
Cutting Tool
Ejector plate
Cutting Tool
Ejector plate
Cutting Tool
Ejector plate
Cutting Tool
Ejector plate
Locking bolt
Decoring device
Decoring device
Agitator
device
/