Robern PLM1630GB Dimensions Guide

Robern
Brand
Robern
Model
PLM1630GB
Type
Dimensions Guide

This manual is also suitable for

PL SERIES FLAT DOOR CABINET
Features
S Recess or surface mount
S Mirrored doors and interior
S 3-way adjustable concealed hinge system
S SAFESEAL
®
gasket frame
S Rust-free aluminum construction
S Can be installed as a left- or right-hand door swing
S Four adjustable 1/4 (6 mm) glass shelves
S 15-1/4 (38.7 cm) W x 39-3/8 (100 cm) H x 4-5/8 (11.7 cm) D
Codes/Standards Applicable
Specified model meets or exceeds the following:
S None applicable
Specified Model
Model Description
PLM1640W Plain edge, white interior o
PLM1640B Plain edge, black interior o
PLM1640WB Beveled edge, white interior o
PLM1640BB Beveled edge, black interior o
NOTE: Additional hardware is required for installing cabinets side-by-side.
Required Accessories - For Surface Mount Installations Only
M40SKD4A Aluminum side kit o
PLSK40D4P Mirrored side kit o
Refer to the Price Guide for additional side kit colors and finishes.
Optional Accessories
SLB16D4 Safety-lock box o
SOMM Black swing-out magnifying mirror o
PLGKIT PL ganging kit - hardware required for installing 2 or 3 cabinets side-by-side o
Light options and additional accessories are available. Refer to the Price Guide for more information.
Page 1 of 2
1139191-4-
A
USA: 1-800-877-2376
www.robern.com
PLM1640W
ALSO PLM1640B, PLM1640WB,
PLM1640BB
PL SERIES FLAT DOOR CABINET
Technical Information
Roughing-in
opening
14-1/2 (36.8 cm) W x 38-5/8 (98.1 cm) H
x 4 (10.2 cm) D
Door opening
angle
170°
Installation Notes
Install this product according to the installation guide.
When determining the height of the mirrored cabinet, ensure
the mirrored door will clear all obstacles, such as a faucet. A
minimum distance of 1 (2.5 cm) is required.
Secure the screws (provided) to a stud to avoid possible
property and product damage. If this is not possible, anchors
(provided) must be inserted before installing the screws.
Modular components can be joined horizontally and vertically.
When ganging cabinets: rough opening width/height =
total width/height of all cabinets and lights minus 3/4 (1.9 cm).
Recessed cabinets project 7/8 (2.2 cm) from wall.
Page 2 of 2
1139191-4-
A
PL SERIES FLAT DOOR CABINET
Product Diagram
3-3/4 (9.5 cm)
4-5/8 (11.7 cm)
15-1/4 (38.7 cm)
39-3/8
(100 cm)
  • Page 1 1
  • Page 2 2

Robern PLM1630GB Dimensions Guide

Robern
Brand
Robern
Model
PLM1630GB
Type
Dimensions Guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents