Code CR1000 Integration Guide

Type
Integration Guide
CR1000, CR1400 & CR2600
CERNER MILLENIUM
Integration Guide
Configuration Guidewww.codecorp.com YouTube.com/codecorporation
VERSION 03 RELEASE DATE: MARCH 2016
Dedicated to
Workstation on Wheels
Dedicated to
Clinician
Dedicated to
Patient Room
To configure a CR1000 or CR1400 to be dedicated to a patient room or
workstation on wheels, scan the following barcode:
Scan the preferred CR2600 workflow configuration setting barcode:
Configuring CR1000 and CR1400 Barcode Readers
Configuring a CR2600 Barcode Reader
Dedicated to Patient Room or
Workstation on Wheels
- Not Compatible with Other Models -
D006798_03 Cerner Millenium Integration Guide
Vibrate On/
Beep On
Ignore Second
Barcode on IV Bag
Reset CR1000/CR1400 to Factory
Default Settings
Reset CR2600 to Factory
Default Settings
Vibrate On/
Beep Off
Vibrate Off/
Beep On
Clear all JavaScript Rules
Scan the preferred feedback setting:
Note: The CR1000 does not have a vibration feature. To change the beep volume,
download the CR1000 Configuration Guide from www.codecorp.com.
Scan the preferred configuration setting:
Scan the following barcodes to identify firmware versions:
CR1400 and CR2600 Feedback Settings
CR1000, CR1400 and CR2600 Reader Settings
Firmware Version Information
Modem Firmware
Version Information
Reader Firmware
Version Information
  • Page 1 1
  • Page 2 2

Code CR1000 Integration Guide

Type
Integration Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI