SWM15-PRO
SWM15-PRO
MIC1 MIC2 POWER
HDMI IN
HDMI OUT
(ARC)
AUDIO IN AUDIO OUT
DC 5V
The dual-channel home theater wireless microphone system
comes with Ultra-High Frequency (UHF) and is interference free.
HDMI and 1/8" (3.5mm) input and output for instant Karaoke fun.
The HDMI Audio Return Channel (ARC) on the SWM15-PRO
receiver allows you to connect a smart TV via HDMI ARC to the
receiver through one HDMI cable (not included) and make the
set up a breeze.
* .
Compatible with an array of devices including TV, Smart TV,
Blue-Ray player, notebook, iPad, tablet, home theater, receiver,
speaker, etc. .
The portable receiver and audio mixer supports up to two wireless
microphones (included) and two wired microphones (not included).
Adjustable echo and tone controls for more Karaoke fun. .
Easy to set up with up to 8 selectable frequencies and independent
volume controls. .
Up to 100 feet line-of-sight operation range. Perfect for Karaoke,
DJ music and house party. .
Connecting a smart TV to the SWM15-PRO receiver through
HDMI requires your smart TV to have HDMI ARC port. Most
TV manufacturers offer ARC output over only one HDMI port
instead of all three or four ports on the set. This is usually indi-
cated by a label on the set itself. If the HDMI ports aren't clearly
labeled, you can check the TV manual, which should indicate
which HDMI port to use. .
*
HDMI Output
and ARC
1. Connect with Smart Television
Smart TV SWM15-PRO Input Devicesto to AUX
STEP1 Smart TV
Connect one end of a HDMI Cable
(not included) to the Port.HDMI ARC
STEP2 SWM15-PRO
Connect the other end of the HDMI
Cable HDMI ARCto the Port.
Connect one end of the included
to the Port.AUX Cable Audio Out
STEP3 Sound Bar, Receiver, Speaker
Connect the other end of the AUX
into the Port.Cable AUX
Note: Bluetooth connection
The SWM15-PRO comes with built-in Bluetooth function and you can choose to pair the receiver with
your Bluetooth device as well.
1. Once you power on the receiver, the receiver will become discoverable as .SWM15-PRO
2. In the of your Bluetooth enabled devices, set it to " ". From the Bluetooth device list,settings discover
select the " " device.SWM15-PRO
The SWM15-PRO microphone receiver is now paired with your Bluetooth enabled device.
When Bluetooth is used to connect a device (say a Bluetooth enabled cellphone) and the SWM15-PRO
receiver, please connect the receiver via Audio Out port to the sound output device (say a speaker or
sound bar). The HDMI out port and Bluetooth cannot be used simultaneously.
STEP1 Smart TV
Connect one end of a HDMI Cable
(not included) to the Port.HDMI ARC
STEP2 SWM15-PRO
Connect the other end of the HDMI
Cable HDMI ARCto the Port.
Using the included AUX to RCA
, connect the end to theCable AUX
Port.Audio Out
STEP3 Sound Bar, Receiver, Speaker
Connect the end of the sameRCA
cable into the Port.Audio In
Choose the correct channel on your
device.
Smart TV SWM15-PRO Input Devicesto to RCA
3. Sound Mode
HDMI IN
HDMI OUT
(ARC)
AUDIO IN AUDIO OUT
DC 5V
1. Connect the AUX
Cable via AUDIO OUT
2. Connect the other end
of the AUX Cable through
PC audio input
3. Connect a AUX Cable through
the PC audio output port
4. Connect the other
end of the AUX Cable
through AUDIO INPUT
port
4. Small meeting connection
HDMI IN
HDMI OUT
(ARC)
AUDIO IN AUDIO OUT
DC 5V
1. Connect the AUX
Cable via AUDIO OUT
2. Connect the AUX Cable
through the input portAUX
HDMI IN
HDMI OUT
(ARC)
AUDIO IN AUDIO OUT
DC 5V
5. Connect with HDMI blueray and TV
1. Connect HDMI Cable
via HDMI IN
2. Connect HDMI Cable
via HDMI OUT
3. Choose a HDMI port and
connect the HDMI Cable
HDMI IN
HDMI OUT
(ARC)
AUDIO IN AUDIO OUT
DC 5V
PC
Receiver, Portable PA System/Speaker, Soundbar
1. Connect source via HDMI
Streaming Device
Streaming Media
Player
2. Connect HDMI Cable via HDMI IN
3. Connect HDMI Cable via HDMI OUT
4. Choose a HDMI port and
connect the HDMI Cable
5. Connect the AUX
Cable via AUDIO OUT
6. Connect the AUX Cable
through the input portAUX
2. Connect with PC, streaming device or streaming media player
SWM15-PRO
1 SWM15-PRO receiver/mixer
1 Power adapter
2 3.5mm/RCA audio cables
2 Handheld wireless microphones
1 3.5mm/3.5mm audio cables
1 User manual
Receiver & Microphone Does Not Connect
If Your receiver is showing a red light, the receiver and microphones is not paired correctly. You will
need to follow the instruction in below and pair the receiver and microphone.
Turn off both the receiver and the handheld microphone.
Push both the Set & Power buttons at the same time to turn on the microphone.
After one or two seconds, the signal bar on the screen of the microphone will be moving. You can
release the Set & Power button now.
Turn on the receiver. After three to five seconds, your microphone will be paired withe the receiver
and the LED light will turn to blue.
Faint Sound or No Sound
Verify connections to PA system
Adjust channel volume
Turn on handheld microphone
Check that batteries are installed correctly
Charge or charge batteries
Verify power adapter is plugged securely into the outlet
Check that receiver unit is powered on
Audio Interference, Artifacts, or Dropouts
Identify and remove sources of interference: mobile phones, Wi-Fi access points, signal
processors, electronics, etc.
Charge or change batteries
Move system away from metallic surfaces
Provide line-of-sight from handheld microphone or bodypack to receiver unit antennas
Distortion
Lower channel volume
Change or charge batteries
Verify fidelity of signal cable to PA
If you are still experiencing issues after following this troubleshooting guide, please email
[email protected] for expert assistance.
-
1
-
2
-
3
-
4
-
5
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Philips HTB5520/98 User manual
-
-
-
-
-
Philips HTB4580G User manual
-
-
Philips HTB3580G User manual
-
Philips HTB3520/94 User manual
-
Philips HTB3520X User manual