TreeDiaper TD48 Installation guide

Brand
TreeDiaper
Model
TD48
Type
Installation guide

This manual is also suitable for

TreeDiaper TD48

TreeDiaper TD48 is a water-absorbing treemat designed to help keep newly planted and young trees hydrated during drought and in between watering. It is made of a unique material that absorbs and holds water, releasing it slowly to the roots of the tree.

Features:

  • Absorbs and holds water, releasing it slowly to the roots of the tree
  • Helps to reduce water consumption and the frequency of watering
  • Protects the soil around the tree from erosion and compaction
  • Discourages weeds and pests

Benefits:

  • Helps trees to establish quickly and grow healthily
  • Reduces the stress on trees during drought conditions

TreeDiaper TD48

TreeDiaper TD48 is a water-absorbing treemat designed to help keep newly planted and young trees hydrated during drought and in between watering. It is made of a unique material that absorbs and holds water, releasing it slowly to the roots of the tree.

Features:

  • Absorbs and holds water, releasing it slowly to the roots of the tree
  • Helps to reduce water consumption and the frequency of watering
  • Protects the soil around the tree from erosion and compaction
  • Discourages weeds and pests

Benefits:

  • Helps trees to establish quickly and grow healthily
  • Reduces the stress on trees during drought conditions
Instructions:
Each package contains four separated pieces of TreeDiaper
TM
treemat that can be
assembled into one whole-ring treemat. Use this one whole-ring treemat around each newly
planted and young trees under 2” thick mulch. For best result, follow these procedures to
make sure your trees receive water from the TreeDiaper
TM
treemats during drought and in
between watering.
Procedure A: If you want to place the TreeDiaper
TM
treemats around trees 2 months
before the usual watering/drought season of your region,
1. place the dry treemat on top of soil around the trees; make sure the dry pellets are evenly
distributed and not accumulated at one end;
2. cover with 2” of mulch to disguise the mat and also prevent being blown away by wind;
3. use landscaping staples on one corner of the treemat in high wind region.
Procedure B: If you want to place the TreeDiaper
TM
treemats around trees during the
drought season or less than 2 months before the usual watering/drought season of
your region,
1. soak the treemat in a 5-gallon bucket filled with water for 3-5 hours or till it absorbs at
least half of the water in the bucket; Instead of soaking in a bucket, one can also use a
soaker hose to water the treemat for overnight after installation;
2. place the partially soaked treemat on top of soil around the trees;
3. cover with 2” of mulch to disguise the mat and also prevent being blown away by wind;
4. use landscaping staples on one corner of the treemat in high wind region.
Procedure C: If you want to use TreeDiaper
TM
treemats in combination with drip irrigation
system, use procedure A and let drip irrigation water the top of the treemat.
After installation, water your trees when wilting or yellow leaves are observed or once
every four weeks if you observed less than 1” of rain during that period.
Notice: Don’t place any soil, dirt, fine sand, compost, or iron-based tree grates on top of treemat,
which may result in the loss of functionalities of the product. Direct contact of fertilizers with the
TreeDiaper in use or in storage may temporarily or permanently affect the performance of the
product. The surface integrity of the Product can be cut by sharp objects (lawnmower, or
tool/equipment etc.). It may bring adverse effect on the functionality of the Product.
If you have any questions, please email info@treediaper.com.
TreeDiaper
TM
Darker Side Facing up
  • Page 1 1

TreeDiaper TD48 Installation guide

Brand
TreeDiaper
Model
TD48
Type
Installation guide
This manual is also suitable for

TreeDiaper TD48

TreeDiaper TD48 is a water-absorbing treemat designed to help keep newly planted and young trees hydrated during drought and in between watering. It is made of a unique material that absorbs and holds water, releasing it slowly to the roots of the tree.

Features:

  • Absorbs and holds water, releasing it slowly to the roots of the tree
  • Helps to reduce water consumption and the frequency of watering
  • Protects the soil around the tree from erosion and compaction
  • Discourages weeds and pests

Benefits:

  • Helps trees to establish quickly and grow healthily
  • Reduces the stress on trees during drought conditions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents