Livex Lighting 2033-04 Operating instructions

Type
Operating instructions

This manual is also suitable for

Livex Lighting 2033-04 is an outdoor wall mount light fixture, perfect for illuminating your home's exterior. With its classic design and durable construction, this fixture is sure to provide years of reliable service. The fixture is easy to install and can be mounted on any standard junction box. It features a single light bulb socket, compatible with a variety of bulb types, including LED, CFL, and incandescent. The fixture is also weather-resistant, making it ideal for use in all types of climates.

Livex Lighting 2033-04 is an outdoor wall mount light fixture, perfect for illuminating your home's exterior. With its classic design and durable construction, this fixture is sure to provide years of reliable service. The fixture is easy to install and can be mounted on any standard junction box. It features a single light bulb socket, compatible with a variety of bulb types, including LED, CFL, and incandescent. The fixture is also weather-resistant, making it ideal for use in all types of climates.

ASSEMBLING & INSTALLATION INSTRUCTIONS PRODUCT# 2031 2033 2036
OUTDOOR WALL MOUNT LIGHT FIXTURE
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
MOUNTING THE FIXTURE
Installation (see fig.1)
1. Shut off the power at the circuit breaker and remove old
fixture, including the cross bar.
2. Carefully unpack new fixture and lay all the parts on a clear
surface. Take care not to lose any small parts necessary for
installation.
3. Attach the mounting screw part way into the side hole of the
crook cross bar, then lock it securely with hex nut until
becoming. Attach the cross bar to the junction box using two
box screws. The side of the cross bar marked “GND” must
face out.
4. Follow wiring instructions carefully (see fig.2)
5.
Aligning end of the arm(B) small hole with the backplane’s hole,
lock it securely with screw(F) and hex nut, attach the other end of
the arm(B) hole to the top pipe nipple of lamp body(C), lock it
securely with the finial(A). Attach the back plate of the lamp
body(C) onto the junction box, aligning screws on cross bar with
mounting holes and lock it securely with the ball nuts(D). Slip the
threadlike bolt of the lamp body in side, open the window. Put the
candle sleeve(E) over the lamp holder.
6.
Install the light bulbs in accordance with the fixture’s
specifications. DO NOT EXCEED THE MAXIMUM
WATTAGE RATING!
Close the window.
With silicone caulking compound, caulk completely around where
back of cover meets with the wall surface to prevent water from
seeping into outlet box.
Wiring (see fig.2)
1. Connect the electrical wires as follows. Connect the
black wire from the fixture to the black house (hot)
Wire. Connect the white wire from the fixture to the
white (neutral) house wire. Make sure all wire nuts are
secured. You may wrap the connections with electrical
tape. If your outlet box has a ground wire (green or bare
copper) connect fixture’s ground wire to it. Otherwise
attach the bare copper fixture wire to the green ground
screw on the cross bar.
2.Tuck the wire connections neatly into the wall junction
box.
DOC20150802031
Fig.1
B
A
C
D
E
F
Fig.2
White or
HOUSE
Black
WIRES
(Hot)
Smooth
FIXTURE
WIRES
Black or
Ribbed
WIRES
FIXTURE
Bare Copper(Ground)
FIXTURE
WIRES
Copper
(Ground)
HOUSE
(Neutral)
WIRES
White
Bare
Green or
WIRES
HOUSE
  • Page 1 1

Livex Lighting 2033-04 Operating instructions

Type
Operating instructions
This manual is also suitable for

Livex Lighting 2033-04 is an outdoor wall mount light fixture, perfect for illuminating your home's exterior. With its classic design and durable construction, this fixture is sure to provide years of reliable service. The fixture is easy to install and can be mounted on any standard junction box. It features a single light bulb socket, compatible with a variety of bulb types, including LED, CFL, and incandescent. The fixture is also weather-resistant, making it ideal for use in all types of climates.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI