Allied Brass 404D-18BB-ABR Installation guide

18.00"

2x 9/16" (Hole in Door)

GLASS DOOR

DOOR PULL

GLASS DOOR

Back Plate

10-24 Hex Nut

Plastic Washer

Clear Vinyl Bushing

10-24 Screw

Mounting Lug

Step 1:

Determine your desired location for installation and make 2 marks for the location for mounting.. Drill Ø9/16" hole at each of

the marks.

Drill Ø9/16" Holes into Glass Door

Mount Door Pull to Door as below.

Step 2:

Shower Door Pull Mounting

404D-18BB

INSTALLATION INSTRUCTIONS

No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.