Crossco DE040-4 Installation guide

Crossco
Brand
Crossco
Model
DE040-4
Type
Installation guide

This manual is also suitable for

SANISATION
CODE: DE040
DESCRIPTION:
CROSSCO SANISATION - Badly soiled toilets and urinals need special attention.
Our acid Bowl Cleaner has the power to quickly remove rust, dissolve organic
stains and eliminate hard water residue.
RECOMMENDED
USES:
CROSSCO SANISATION - Acid cleaner that removes rust, mildew and moisture
stains from porcelain and metal surfaces. Removes stubborn hard water
stains from bath tubs, toilets, urinals, wash basins and sinks
PRODUCT CHARACTERISTICS
Muriatic Acid (HCl), %wt 9% +/- 1%
Specific Gravity @ 60 Deg 1.047
Physical State Liquid
Color, APHA Blue
Baume Grades 9-10
PHYSICAL PROPERTIES
#/Gallon 9.04
PH >1.5
Flash Point N/A
Solubility Water
Incompatibility Bleaches, Oxidizers, metals, alkalis, cyanides
Hazardous Decomposition Reacts with metals to form hydrogen gas.
Polymerization - Conditions to Avoid Will not occur-None.
Unusual Fire & Explosion Hazards Cool containers exposed to intense heat
with water to prevent container rupture.
ACID BOWL & PORCELAIN CLEANER
•Stain Remover
•Dissolves Hard Water
•Does Not Affects Surface Gloss
•Efflorescence Remover
•Fast Acting Formula
•Safe for Bathroom use
ADVANTAGES:
Directions for working with Sanisation Acid bowl
Cleaner: Wear protective clothing, rubber gloves
and plastic safety glasses while using. Avoid
contact with chrome, brass, decorative metal
surfaces, marble, clothing, carpeting, toilet seat and
lid.
TOILET BOWLS: Apply under rim and around sides.
Allow product to work for 5 minutes. Scrub entire
surface and flush to rinse. More severe stains may
require a repeat treatment.
URINALS: Remove screens or strainers. Apply at
least four ounces around edges and top, allowing
the product to flow down over surfaces. Wait 5
minutes before scrubbing, then flush to rinse.
GENERAL PRODUCT INFORMATION
SPECIFICATIONS
AVAILABLILITY
DE040-1 55 GAL
DE040-2 5 GAL
DE040-2 4/ 1 GAL
DE040-5 12/ 32oz Bottle
SAFETY INFORMATION
Keep acid away from other chemicals, and never
mix acid with any other chemicals. Mixed with
Chlorine, and you can create a very dangerous
mustard gas.
Muriatic acid must be used with EXTREME
CAUTION!! Contact with the eyes, for example, can
cause irreversible damage and permanent
blindness. Contact with the skin even for a few
moments can cause severe burns.
Refer to product Material Safety Data Sheet (MSDS)
prior to product use.
SANISATION
Notice: The technical data contained herein are true
and accurate to the best of our knowledge.
Published instructions are subject to change
without prior notice.
  • Page 1 1
  • Page 2 2

Crossco DE040-4 Installation guide

Crossco
Brand
Crossco
Model
DE040-4
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents