Delta 44-BLLHP Specification

Delta
Brand
Delta
Model
44-BLLHP
Type
Specification

This manual is also suitable for

Delta 44-BLLHP is a three-handle bidet valve with a four-hole installation and a long hose for maximum reach. It has a temperature and volume control, and all operating parts are replaceable from the top for easy maintenance. The bidet valve is made of solid fabricated brass and has a lifetime limited warranty on parts and finishes. It complies with ASME A112.18.1/CSA B125.1 and is available in various finishes.

Delta 44-BLLHP is a three-handle bidet valve with a four-hole installation and a long hose for maximum reach. It has a temperature and volume control, and all operating parts are replaceable from the top for easy maintenance. The bidet valve is made of solid fabricated brass and has a lifetime limited warranty on parts and finishes. It complies with ASME A112.18.1/CSA B125.1 and is available in various finishes.

SPECIALTY FAUCETS
■ Three Handle Bidet Valve
■ Four Hole Installation
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• Solid fabricated brass end valves
• Widespread flexible mounting installation
• Clear knob handles with red/blue indicators or LHP-Less
Handle Program. See handle options below.
• Directional handle for rim flush or rosette spray.
• Control mechanism is a rotating cylinder type
with stainless steel plate and 180˚ rotation, with
replaceable non-metallic seats operating in stainless
steel lined sockets.
• Hot and cold stems are interchangeable.
• Temperature and volume controlled with handles.
• All operating parts shall be replaceable from the top.
• 3/8" O.D. copper tube inlets with 1/2"-14 NPSM adapters.
• Metal pop-up drain assembly.
• Model 44 series has vacuum breaker.
• For handle H253 you must also order RP62961, which
contains 62480 base and 1713 bonnet.
DSP-S-44 Rev. D
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for finish options and product availability.
5"
(127 mm)
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2017 Masco Corporation of Indiana
1 1/8"
(29 mm)
44
1 1/4" (32 mm)
Max. Deck Thickness
WARRANTY
•
Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes:
or, for commercial users, for 5 years from
date of purchase.
•
5 year limited warranty on electronic parts
(other than batteries); or, for commercial
users, for 1 year from the date of purchase.
No warranty is provided on batteries.
2 1/4"
(57 mm)
44-LHP
COMPLIES WITH:
•
ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1
H11/H21s H17/H27s
A24s H25s
H26/H36s
H31/H41s
H212s H215s H216s
1 1/8"
(29 mm)
1 1/4"
(32 mm)
2 1/2"
(64 mm)
1 1/4"
(32 mm)
1 3/8"
(35 mm)
3"
(76 mm)
2 5/16"
(59 mm)
3"
(76 mm)
Available LHP Handle Options
12" (305 mm)
Long Hose
1/2" (13 mm)
Max. Thickness
6"-8"
(152 mm-203 mm)
2"
(51 mm)
1 1/8"
(29 mm)
18"
(457 mm)
Max.
11/16"
(17 mm)
24" (610 mm)
Long Hose
1 1/2"
(38 mm)
1 1/4"
(32 mm)
Dia.
4 1/2"
(107 mm)
3 3/8"
(86 mm)
2 1/8"
(54 mm)
1 5/8"-2 3/8"
(41 mm-60 mm)
7/16"
(11 mm)
0"-1"
(0 mm-25 mm)
1 3/4"
(44 mm)
1/2"-14 NPSM (female)
3/8" or 1/2" bullnose riser
s Designate proper finish suffix
H240s H253s
H269s H277s
H278s
2 1/2"
(64 mm)
3"
(76 mm)
2 1/2"
(64 mm)
2 1/2"
(64 mm)
H24s
3 1/4"
(83 mm)
2 1/2"
(64 mm)
A24s
Available LHP Handle Accent
Options with Matching Lift Knobs
  • Page 1 1

Delta 44-BLLHP Specification

Delta
Brand
Delta
Model
44-BLLHP
Type
Specification
This manual is also suitable for

Delta 44-BLLHP is a three-handle bidet valve with a four-hole installation and a long hose for maximum reach. It has a temperature and volume control, and all operating parts are replaceable from the top for easy maintenance. The bidet valve is made of solid fabricated brass and has a lifetime limited warranty on parts and finishes. It complies with ASME A112.18.1/CSA B125.1 and is available in various finishes.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents