AFi SM24p-SFP- Owner's manual

SM24p-SFP

Managed Switch

JPK 4/2016

20-Port 100/1000 SFP plus

4 RJ-45/100/1000 SFP Combo Port

LEGAL

The information in this publication has been carefully checked and is believed to be entirely

accurate at the time of publication. Our company assumes no responsibility, however, for

possible errors or omissions, or for any consequences resulting from the use of the information

contained herein. Our company reserves the right to make changes in its products or product

specifications with the intent to improve function or design at any time and without notice and

is not required to update this documentation to reflect such changes.

Our company makes no warranty, representation, or guarantee regarding the suitability of its

products for any particular purpose, nor do we assume any liability arising out of the

application or use of any product and specifically disclaims any and all liability, including

without limitation any consequential or incidental damages.

Our products are not designed, intended, or authorized for use in systems or applications

intended to support or sustain life, or for any other application in which the failure of the

product could create a situation where personal injury or death may occur. Should the Buyer

purchase or use our product for any such unintended or unauthorized application, the Buyer

shall indemnify and hold our company and its officers, employees, subsidiaries, affiliates, and

distributors harmless against all claims, costs, damages, expenses, and reasonable attorney fees

arising out of, either directly or indirectly, any claim of personal injury or death that may be

associated with such unintended or unauthorized use, even if such claim alleges that our

company was negligent regarding the design or manufacture of said product.

About This Manual

Copyright

The products and programs described in this User’s Manual are licensed

products of Manufacture Technology, This User’s Manual contains proprietary

information protected by copyright, and this User’s Manual and all

accompanying hardware, software and documentation are copyrighted. No

parts of this User’s manual may be copied, photocopied, reproduced,

translated or reduced to any electronic medium or machine-readable from by

any means by electronic or mechanical. Including photocopying, recording, or

information storage and retrieval systems, for any purpose other than the

purchaser’s personal use, and without the prior express written permission of

Manufacture Technology.

.

Purpose

This manual gives specific information on how to operate and use the

management functions of the SM24P-SFP

Audience

The Manual is intended for use by network administrators who are

responsible for operating and maintaining network equipment; consequently,

it assumes a basic working knowledge of general switch functions, the

Internet Protocol (IP), and Simple Network Management Protocol (SNMP).

CONVENTIONS

The following conventions are used throughout this manual to show

information.

Disclaimer

Manufacture Technology does not warrant that the hardware will work

properly in all environments and applications, and marks no warranty and

representation, either implied or expressed, with respect to the quality,

performance, merchantability, or fitness for a particular purpose. Manufacture

disclaims liability for any inaccuracies or omissions that may have occurred.

Information in this User’s Manual is subject to change without notice and does

not represent a commitment on the part of Manufacture. Manufacture

assumes no responsibility for any inaccuracies that may be contained in this

User’s Manual. Manufacture makes no commitment to update or keep current

the information in this User’s Manual, and reserves the righter to make

improvements to this User’s Manual and /or to the products described in this

User’s Manual, at any time without notice.

FCC Warning

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the Instruction manual, may cause harmful

interference to radio communications.

FCC Caution

To assure continued compliance (example-use only shielded interface cables

when connection to computer or peripheral devices). Any changes or

modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment. This device complies

with Part 15 of the FCC Rules. Operation is subject to the Following two

conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may

cause undesired operation.

CE mark

Warning

This is a Class B device, In a domestic environment, this product may cause

radio interference, in which case the user may be required to take adequate

measures.

NOTE: Emphasizes important information or calls your

attention to related features or instructions.

W

ARNING

:

Alerts you to a potential hazard that could cause

personal injury.

C

AUTION

:

Alerts you to a potential hazard that could cause

loss of data, or damage the system or equipment.

Table of Contents

RevisionHistory....... .................... ........... ........... ........... ........... ........... ........... ................... ........... ...................ix



INTRODUCTION........................................................................................................ ..................... 1

CHAPTER1OPERATIONOFWEB‐BASEDMANAGEMENT .......................................................... 2

CHAPTER2SYSTEMCONFIGURATION ....................................................................................... 6

2‐1System ................. ........................... ..................................................... .................................................. 6

2‐1.1PackageContents .......... ........... ........... ........... ........... ........... .................... ........... ........... ........... ............ 6

2‐1.2FrontoftheSwitch ................... ........... .................... ........... .................... ........... ........... .................... ..... 6

2‐1.3ConnectingtoACPowerSource .......................... ........... ........... ................... ........... .................... .......... 6

2‐1.4PortandsystemstatusLEDs ... ........... ........... .................... ........... ........... ........... ........... ........... ........... ... 7

2‐1.5ConsoleConnection..... ........... ........... .................... ........... .................... ........... ........... ........................... 8

2‐1.6Information .. .................... ........... ........... ........... ........... .......... ........... .................... ............. ................... 8

2‐1.7IP ..... ........... ........... ........... ................... ........... ........... ........... ........... ........... ........... ................................ 7 

2‐1.8NTP................. ........... ........... ........... ........... ........... .................... ........... ........... ...................... ........... ... 10 

2‐1.9Time ........... ........... ........... ........... ........... ........... ................... ........... ........... ........... .................... .......... 11

2‐1.10Log..... ........... .................... ........... ........... ........... ........... ........... ........... ........... .............................. ...... 13

2‐2GreenEthernet................................................................................................................ ......... ............ 14

2‐3PortsConfiguration ............................................................... ............................................................... 18

2‐3.1Ports.... ........... ........... ........... ........... ........... .................... ........... ........... ........... ........... ........... ........... ... 18

2‐3.2PortsDescription .................. ........... .................... ........... ........... ................... ............ ........................... 21

2‐4DHCP ............................................................................... ..................................................................... 22

2‐4.1Server....... ........... ........... .......... ........... ........... .................... ........... ........... ........... ........... ........... .......... 22

2-4.1.1 Mode .... ........... ........... ........... .................... ........... ........... ........... ........... ........... ........... .............. 22

2-4.1.2 Excluded IP .... .................... ........... ........... ........... ........... ........... ........... ................... ........... ...... 24

2-4.1.3 Pool ................. ........... ........... ........... ........... ........... ........... .................... ........... ........... .............. 25

2‐4.2Snooping ................... ........... ........... ........... ........... ........... .................... ........... ........... ................... ...... 27

2‐4.3Relay............. ........... .................... ........... ........... ........... ........... .......... ........... ........... ........... ........... ...... 29

2‐5Security................... ..................................................... ........................................................................ 31

2‐5.1Switch ........... ........... .................... ........... ........... ................... ........... .................... ...................... .......... 31

2-5.1.1 Users .. ........... .................... ........... ........... ........... .......... ........... ........... ........... ............................ 31

2-5.1.2 Privilege Level..... ........... .......... .................... ........... ........... ........... ........... ........... ........... .......... 33

2-5.1.3 Authentication Method........... ........... ........... ........... ........... ........... ........... ........... .................... . 35

2-5.1.4 SSH ........... ........... .......... ........... .................... ........... ........... ........... ........... ........... .................... . 36

2-5.1.5 HTTPs ........... .................... ........... ........... ........... ........... ........... .......... .................... ................... 37

2-5.1.6 Access Management ............... ........... .................... ........... ........... ........... ........... ........... .......... 38

2-5.1.7 SNMP. ........... ........... ........... ........... ........... ........... .................... ........... .......... ........... ................. 40

2-5.1.8 RMON ............. ........... ........... .................... ........... ........... ........... ........... ........... ........... .............. 55

2‐5.2Network ... ........... ........... ................... ........... .................... ........... ........... .................... ........... ........... ... 61 

2-5.2.1 Limit Control ..................... ........... ................... ........... ........... ........... ........... ........... ........... ........ 61

2-5.2.2 NAS ........................ ........... ........... ........... ........... ........... ........... ................... ........... ................... 64

2-5.2.3 ACL......... ........... ........... ........... ........... .................... ........... ........... ........... ........... ....................... 7 1

2-5.2.4 IP Source Guard ......... ........... .................... ........... ........... ........... ........... ........... ........... ............ 78

2-5.2.5 ARP Inspection. ........... .................... ........... ........... ........... ........... ........... ........... .................... ... 81

2‐5.3AAA ....... ........... ........... .................... ........... ........... ........... ........... ........... ........... .................... ........... ... 88 

2-5.3.1 RADIUS..... ........... ................... ........... ........... ........... ........... ........... ........... .................... ............ 88

2-5.3.2 TACACS+............ ........... ........... ........... ........... ........... ........... ........... .................... ........... .......... 91

2‐6Aggregation................ ................................................................. ........................... .............................. 93

2‐6.1Static .............. ........... ........... ........... ........... ........... .. ........... ........... ........... ........... ............................... . 93

2‐6.2LACP ........... ........... ........... ........... ........... ........... ........... ................... ........... ........... ........... ........... ........ 95

2‐7LoopProtection........................................................................................................................ ............ 97

2‐8SpanningTree ............ ..................................................... ...................................................... ............... 99

2‐8.1BridgeSetting ........ ........... ........... ........... ........... ........... .......... ........... ........... ........... ... ...................... ... 99

2‐8.2MSTIMapping ................ .......... .................... ........... .................... ........... ........... .................... ............ 102

2‐8.3MSTIPriorities ......... ........... .................... ........... ................... ........... ........... .................... ........... ........ 104

2‐8.4CISTPorts ....... ........... ........... ........... ........... ........... ........... .................... ........... ........... ........... ........... . 105

2‐8.5MSTIPorts .. ........... ........... ................... ........... ........... ........... ........... ........... ........... .................... ........ 107

2‐9IPMCProfile ........................ ........................... ................................................................. ...... ..............109

2‐9.1ProfileTable.... ........... ........... ........... ........... ........... ........... .................... ........... ........... ....................... 109

2-9.1.1 IPMC Profile Rule Settings Table ............. ........... ........... ........... ........... ........... .................... . 110

2‐9.2AddressEntry . ........... ........... ........... ........... .................... ........... ........... ........... ........... ........... ............ 112

2‐10MVR.................... ........................... ..................................................... .................................... ...........114

2‐11IPMC .......................................... ..................................................... ................................................ ..117

2‐11.1IGMPSnooping............... ................... ........... ........... .................... ........... .................... ........... .......... 117

2-11.1.1 Basic Configuration. ........... ........... ........... ........... ........... ........... .................... ........... ........... . 117

2-11.1.2 VLAN Configuration ......... ........... ........... .................... .......... ............ .......... ........... ........... .... 119

2-11.1.3 Port Filtering Profile .................... ........... ........... ........... ........... ........... ........... ........... ............ 121

2‐11.2MLDSnooping ........... .................... ........... .................... ........... ........... ................... ........... ......... ...... 123

2-11.2.1 Basic Configuration. ........... ........... ........... ........... ........... ........... .................... ........... ........... . 123

2-11.2.2 VLAN Configuration ......... ........... ........... .................... .......... ............ .......... ........... ........... .... 126

2-11.2.3 Port Group Filtering .... ........... ........... ........... ........... ........... .................... ........... ........... ........ 128

2‐12LLDP............. ................................................................. ........................... .........................................129

2‐12.1LLDPConfiguration .................... ........... ........... ................... ........... .................... ........... ................... 129

2‐12.2LLDP‐MEDConfiguration ......... .......... .................... ........... .................... ........... .................... ........... . 132

2‐13MACTable............. ..................................................... ...................................................... .................138

2‐14VL ANs .... .................................................................... .......................................................................140

2‐15PrivateVLANs............................................................................... .................................................... 144

2‐15.1VL ANMembership ............................ ........... ........... .................... ........... .................... ........... .......... 144

2‐15.2PortIsolation ...................... ........... ........... ........... ........... ........... .................... ........... ....................... 146

2‐16VCL.................................... ..................................................... ...........................................................147

2‐16.1MAC‐basedVLAN ...... ........... ........... ........... ........... ........... ........... .................... ........... ........... ..........147

2‐16.2Protocol‐basedVLAN ................ ........... ........... ................... ........... .................... ........... ................... 149

2-16.2.1 Protocol to Group................. ........... ........... .................... ........... ........... ........... ........... .......... 149

2-16.2.2 Group to VLAN.......... ........... ........... ........... ........... .................... ........... ........... ........... .......... 151

2‐16.3IPSubnet‐base dVLAN ................. ........... .................... .......... .................... ........... ........... . .......... ...... 152

2‐17VOICEVLAN.................................................. ..................................................... ..................... ...........153

2‐17.1Configuration .................... ........... ........... ........... ........... ........... ........... ................... .............. ........... . 153

2‐17.2OUI ...... ........... ........... ........... ........... ........... .................... ........... ........... ........... ........... ........... .......... 155

2‐18QoS ..................................................... ..................................................... .................................... .....156

2‐18.1PortClassification ................. ........... ........... ........... .................... ........... ........... ........... ..................... 156

2‐18.2PortPolicing ............ .................... ........... ........... ................... ........... .................... ........... ................. 158

2‐18.4PortSchedulers............ ........... ........... ........... ........... ........... .................... ........... ........... ................... 159

2‐18.5PortShaping ..................... ........... .................... ........... .......... .................... ........... ............................ 162

2‐18.6PortTagRemarking.... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........ 165

2‐18.7PortDSCP ............ ........... ........... ........... ................... ........... ........... ........... ........... ........... ................. 168

2‐18.8DSCP‐BasedQoS ..................... ........... ........... ........... .................... ........... ........... ........... ........... ........ 170

2‐18.9DSCPTranslation ................... .................... .................... .................... ........... ................... . ................ 172

2‐18.10DSCPClassification.............. .................... .................... ........... ................... .................... ............. .... 174

2‐18.11QoSControlListConfiguration....................... ........... .......... .................... ........... .................... ........ 175

2‐18.12StormControl ................... ........... ........... ........... ........... ........... .................... ........... ........... ........... . 179

2‐18.13WRED ......... ........... ........... ........... .................... ........... ........... ........... ........... ........... ................... .... 181

2‐19Mirror .......................................................... .......................... ...........................................................183

2‐20UPnP .................. ................................................................................ .................................... ...........185

2‐21.GVRP................................ ..................................................... ...........................................................186

2‐21.1GlobalConfig ........... .................... ........... ........... .................... .......... .................... ........... ......... ........ 186

2‐21.2PortConfig........... ........... ................... ........... ........... ........... ........... ........... ........... ............................ 188

2‐22.sFlow ................................................................................. ..............................................................189 

2-23 Switch2go......................... ..................................................... ................................................. .......192

2-23.1 Switch2go setting. ........... ........... ........... ........... .................... ........... ........... ........... ........... ........... . 192

2-23.2 User Link Management... .................... ........... ........... ........... ........... ........... ........... ................... .... 193

2-23.3 Port Name Service........... ........... ........... .................... ........... ........... ........... ........... ........... ........... . 195

CHAPTER3.MONITOR ............................................................................................................ 196

3‐1System ................. ........................... ..................................................... ...............................................196 

3‐1.1Information .. .................... ........... ........... ........... ........... .......... ........... .................... ............. ............... 196

3‐1.3IPStatus ............................... ........... ........... ........... ........... ........... ........... .................... ........... ........... . 198

3‐1.4Log....... ........... ........... .................... ........... ........... ........... ........... ........... ........... ........... ........... ........... . 200 

3‐1.5DetailedLog................................. ........... ........... ................... ........... .................... ........... ................... 202

3‐2GreenEthernet................................................................................................................ ......... ...........203

3‐2.1PortPowerSavings ................. .................... ........... .................... ........... ........... ................... ............... 203

3‐3Ports .................................................................................................... ...............................................204

3‐3.1TrafficOverview........................... ........... ........... ................... ........... .................... ........... ................... 204

3‐3.2QosStatistics ...................... .................... ................... ........... .................... .................... .................... . 206

3‐3.3QCLStatus ................... .................... ........... ........... .................... ........... .................... ................... ...... 207

3‐3.4DetailedStatistics .......... ........... .................... ........... ........... .................... ........... .................... ............ 209

3‐4DHCP........................................................................................... ........................................................212

3‐4.1Server....... ........... ........... .......... ........... ........... .................... ........... ........... ........... ........... ........... ........ 212

3-4.1.1 Statistics...... ........... ........... ........... ................... ........... ........... ........... ........... ........... ........... ...... 212

3-4.1.2 Binding .......... ........... ........... ........... .................... .......... ........... ........... ........... ........... ............... 213

3-4.1.3 Declined IP ......... ........... ........... ........... ........... ........... ........... ........... .................... ........... ........ 214

3‐4.2SnoopingTable ............ ........... .................... ........... ........... ........... ........... ........... ........... .................... . 215

3‐4.3RelayStatistics.......................... .................... ........... .................... .................... ................... ........... .... 216

3‐4.4DetailedStatistics .......... ........... .................... ........... ........... .................... ........... .................... ............ 218

3‐5Security................... ..................................................... .......................................................................220

3‐5.1AccessManagementStatistics ........... .................... .................... ........... ................... .................... ...... 220

3‐5.2Network ... ........... ........... ................... ........... .................... ........... ........... .................... ........... ........... . 221 

3-5.2.1 Port Security..................... ........... ........... ........... ........... ........... ........... ................... ........... ...... 221

3-5.2.2 NAS ........................ ........... ........... ........... ........... ........... ........... ................... ........... ................. 225

3-5.2.3 ACL Status.... ................... ........... ........... ........... ........... ........... ........... .................... ........... ........232

3-5.2.4 ARP Inspection. ........... .................... ........... ........... ........... ........... ........... ........... .................... . 233

3-5.2.5 IP Source Guard ......... ........... .................... ........... ........... ........... ........... ........... ........... .......... 234

3‐5.3AAA ....... ........... ........... .................... ........... ........... ........... ........... ........... ........... .................... ........... . 236

3-5.3.1 RADIUS Overview ........... ........... ........... ................... ........... ........... ........... ........... ........... ...... 236

3-5.3.2 RADIUS Details..... ........... ................... ........... ........... ........... ........... ........... ........... ................. 238

3‐5.4Switch ........... ........... .................... ........... ........... ................... ........... .................... ...................... ........ 242

3-5.4.1 RMON ............. ........... ........... .................... ........... ........... ........... ........... ........... ........... ............ 242

3‐6LACP ..................................................... ..................................................... .........................................249

3‐6.1SystemStatus ....................... ........... ........... ........... ........... ........... ........... ........... .................... ............ 249

3‐6.2PortStatus............. ........... ........... ........... ........... ........... ........... ........... ........... ........... ..................... .... 250

3‐6.3PortStatistics.. ........... .................... ........... ........... ........... ........... ........... ........... ........... ........... ........... . 252

3‐7LoopProtection...................................................................................................................................253

3‐8SpanningTree ............ ..................................................... ...................................................... ..............254

3‐8.1BridgeStatus ....... ........... ........... .......... ........... ........... ........... ........... ........... ........... ........... ................. 254

3‐8.2PortStatus............. ........... ........... ........... ........... ........... ........... ........... ........... ........... ..................... .... 255

3‐8.3PortStatistics.. ........... .................... ........... ........... ........... ........... ........... ........... ........... ........... ........... . 256

3‐9MVR............... ..................................................... ...................................................... ......... .................257

3‐9.1Statistics ... ........... ........... ................... ........... ........... ........... ........... ........... ........... ........... ........... ........ 257

3‐9.2MVRChannelsGroups................... ........... ........... ........... ........... ........... ........... ........... ...................... . 258

3‐9.3MVRSFMInformation .......... .................... ........... ........... ........... ........... ........... ........... ................... .... 260

3‐10IPMC .......................................... ..................................................... ..................................................262

3‐10.1IGMPSnooping............... ................... ........... ........... .................... ........... .................... ........... .......... 262

3-10.1.1 Status ........................... ........... ........... ........... ........... ........... ........... .................... ........... ........ 262

3-10.1.2 Group Information.................. ........... .................... ........... ........... ........... ........... ........... ........ 264

3-10.1.3 IPv4 SFM Information...... ........... ........... ........... ........... ........... ........... ................... ........... .... 266

3‐10.2MLDSnooping ........... .................... ........... .................... ........... ........... ................... ........... ......... ...... 268

3-10.2.1 Status ........................... ........... ........... ........... ........... ........... ........... .................... ........... ........ 268

3-10.2.2 Group Information.................. ........... .................... ........... ........... ........... ........... ........... ........ 270

3-10.2.3 IPv6 SFM Information...... ........... ........... ........... ........... ........... ........... ................... ........... .... 272

3‐11LLDP............. ................................................................. ........................... .........................................274

3‐11.1Neighbour ................... ........... .................... ........... ........... .................... ........... ...................... .......... 274

3‐11.2LLDP‐MEDNeighbour ...................... ........... ........... ........... ........... ........... ........... .................... .......... 276

3‐11.3EEE ........... ........... ........... ................... ........... ........... ........... ........... ........... ........... .................... ........ 279

3‐11.4PortStatistics.................. .................... .......... ........... ........... ........... ........... ........... ........... ........... ...... 281

3‐12MACTable............. ..................................................... ...................................................... .................283

3‐13VL ANs .... .................................................................... .......................................................................285

3‐13.1VL ANMembership ............................ ........... ........... .................... ........... .................... ........... .......... 285

3‐13.2VL ANPort................ ........... .................... ........... ........... ........... ........... ........... ........... ....................... 287

3‐14VCL.................................... ..................................................... ...........................................................289

3‐14.1MAC‐basedVLAN ...... ........... ........... ........... ........... ........... ........... .................... ........... ........... ..........289

3‐14.2Protocol‐basedVLAN... ........... ........... ........... .................... ........... ........... ........... ........... ........... ........ 290

3-14.2.1 Protocol to Group................. ........... ........... .................... ........... ........... ........... ........... .......... 290

3-14.2.2 Group to VLAN.......... ........... ........... ........... ........... .................... ........... ........... ........... .......... 292

3‐14.3IPSubnet‐base dVLAN ................. ........... .................... .......... .................... ........... ........... . .......... ...... 293

3‐15sFlow ............................................ ................................................................. ................................. ..294

CHAPTER4.DIAGNOSTICS ..................................................................................................... 296

4‐1Ping ......................................................................................... ...........................................................296

4‐2Ping6...................................... ................................................................. ............................................298

4‐3VeriPHY................ ........................... ..................................................... ...............................................300

4‐4Traceroute............ ...................................................... ....................................................................... ..301

CHAPTER5.MAINTENANCE ................................................................................................... 302

5‐1RestartDevice .............................................................................................................. ..................... ..302

5‐2FactoryDefaults ............... ........................... ..................................................... ...................................303

5‐3Firmware .................................................... ..................................................... ................................. ..304

5‐3.1Firmwareupgrade ... ........... ........... ........... .................... .......... ........... ........... ........... ........... ............... 304

5‐3.2FirmwareSelection............... .................... .................... ........... ................... .................... ................... 305

5‐4Configuration ..................................................................... .................................................................306

5‐4.1Savestartup‐config...... ........... ........... ........... ........... .................... ........... ........... ........... ........... .......... 306

5‐4.2Upload................ ........... ........... ........... ........... ........... ........... .................... ........... ...................... ........ 307

5‐4.3Download.............. .................... .......... .................... ........... ........... .................... ........... ............. ........ 308

5‐4.5Delete....... ........... ................... ........... ........... .................... ........... .................... .................................. 310

Revision History

Release Date Revision

V1.0 05/03//2016 A1

Publication date: Sept., 2015

Revision A2

1

INTRODUCTION

Overview

In this user’s manual, it will not only tell you how to install and connect your network

system but configure and monitor the SM24P-SFP through the web by (RJ-45) serial

interface and Ethernet ports step-by-step. Many explanations in detail of hardware and

software functions are shown as well as the examples of the operation for web-based

interface.

The SM24P-SFP, the next generation Web managed switches from Manufacture, is a

portfolio of affordable managed switches that provides a reliable infrastructure for your

business network. These switches deliver more intelligent features you need to improve

the availability of your critical business applications, protect your sensitive information,

and optimize your network bandwidth to deliver information and applications more

effectively. It provides the ideal combination of affordability and capabilities for entry level

networking includes small business or enterprise application and helps you create a more

efficient, better-connected workforce.

SM24P-SFP Web Managed Switches provide 24 ports in a single device; the

specification is highlighted as follows.

 L2+ features provide better manageability, security, QoS, and performance.

 Support IPv4/IPv6 dual stack management

 Support SSH/SSL secured management

 Support SNMP v1/v2c/v3

 Support RMON groups 1,2,3,9

 Support sFlow

 Support IGMP v1/v2/v3 Snooping

 Support MLD v1/v2 Snooping

 Support RADIUS and TACACS+ authentication

 Support IP Source Guard

 Support DHCP Relay (Option 82)

 Support DHCP Snooping

 Support ACL and QCL for traffic filtering

 Support 802.1d(STP), 802.1w(RSTP) and 802.1s(MSTP)

 Support LACP and static link aggregation

 Support Q-in-Q double tag VLAN

 Support GVRP dynamic VLAN

Overview of this user’s manual

 Chapter 1 “Operation of Web-based Management”

 Chapter 2 “System Configuration”

 Chapter 3 “Configuration”

 Chapter 4 “Security”

 Chapter 5 “Maintenance”

Publication date: Sept., 2015

Revision A2

2

Chapter 1 Operation of Web-based Management

Initial

Configuration

This chapter instructs you how to configure and manage the SM24P-SFP

through the web user interface.

With this facility, you can easily access and

monitor through any one port of the switch all the status of the switch,

including MIBs status, each port activity, Spanning tree status, port

aggregation status, multicast traffic, VLAN and priority status, even illegal

access record and so on.

The default values of the SM24P-SFP are listed in the table below:

IP Address 192.168.2.1

Subnet Mask

255.255.255.0

Default Gateway 192.168.2.254

Username

admin

Password

system

After the SM24P-SFP has been finished configuration the it interface, you

can browse it. For instance, type http://192.168.2.1

in the address row in

a browser, it will show the following screen and ask you inputting username

and password in order to login and access authentication.

The default username is “admin” and password is system. For the first

time to use, please enter the default username and password, and then click

the <Login> button. The login process now is completed. In this login menu,

you have to input the complete username and password respectively, the

SM24P-SFP will not give you a shortcut to username automatically. This

looks inconvenient,

but safer.

In the SM24P-SFP, allowed two or more users using administrator’s identity

to manage this switch, which administrator to do the last setting, it will be

an available configuration to effect the system.

NOTE:

When you login the Switch WEB/CLI to manager. You must first type

the Username of the admin and Password of the system, so when

you type after the end Username and password, please press enter.

Management page to enter WEB/CLI.

When you login SM24P-SFP switch Web UI management, you can

use both ipv4 ipv6 login to manage

To optimize the display effect, we recommend you use Microsoft IE

6.0 above, Netscape V7.1 above or FireFox V1.00 above and have

the resolution 1024x768. The switch supported neutral web browser

interface

Publication date: Sept., 2015

Revision A2

5

NOTE:

AS SM24P-SFP the function enable dhcp, so If you do not have DHCP

server to provide ip addresses to the switch, the Switch default ip

192.168.2.1

Figure 1 The login page

Chapter 2 System Configuration

This chapter describes the entire basic configuration tasks which includes the System

Information and any manage of the Switch (e.g. Time, Account, IP, Syslog and NTP.)

2-1 System

You can identify the system by configuring the contact information, name, and location of the

switch.

2-1.1 Package Contents

SM24P-SFP Managed Fiber Switch x1

Four adhesive rubber feet x1

Mounting Accessory x1

AC Power Cord x1

RS232 DB9 to DB9 Cable x1

2-1.2 Front of the Switch

2-1.3 Connecting to AC Power Source

DC Power Connecting

You can plug or remove DC power cable through the DC terminal block from external

48VDC DC power source.

Step1.Insert the DC cable plug directly into the DC terminal block located at the front of

the switch.

Step2.Plug the other end of the cable into an external DC power source.

Step3.Check the front-panel LEDs as the device is powered on to be sure the POWER LED

is lit. If not, check that the power cable is correctly plugged in.

AC Power Connecting

You can plug or remove AC power cord through the AC socket from AC power source.

Step1. Insert the power cable plug directly into the AC Socket located at the back of the

switch.

Step2. Plug the other end of the cable into a grounded, 3-Pin, AC power source.

Step3. Check the front-panel LEDs as the device is powered on to be sure the POWER LED

is lit. If not, check that the power cable is correctly plugged in.

W

ARNING

:

For International use, you may need to change the AC

line cord. You must use a line cord set that has been approved for

the socket type in your country.

2-1.4 Port and system status LEDs

The SM24P-SFP switch includes a display panel for system and port indications that simplify

installation and network troubleshooting. The LEDs, which are located on left hand side of the front

panel for easy viewing. Details are shown below and described in the following tables.

Port Status LEDs

LED Condition Status

P1-P24 SFP

Link/Act/Speed

Green/ Amber

Light when Fiber connection with remote device is

good.

Blinks when any traffic is present.

The light is green when linking up 1000Mbps.

The light is Amber when linking up 100Mbps.

P21-P24 TP

Link/Act/Speed

Green/ Amber

Blinks when any traffic is present.

The light is green when linking up 10/1000Mbps.

The light is Amber when linking up 100Mbps.

System Status LED

SYSTEM LED Condition Status

PWR AC Green Light when power on

PWR DC Green Light when power on

SYS Green

Blinking when system is booting;

Lit when system is coming up.

ALARM Red

Always off; until any message about system

error turn the light on.

2-1.5 Console Connection

Serial Cable Wiring

NOTE: it does not support cross cable for console port

2-1.6 Information

The switch system’s contact information is provided here.

Web interface

To configure System Information in the web interface:

1. Click Configuration, System, and Information.

2. Write System Contact, System Name, System Location information in this page.

3. Click Apply

Figure 2-1.6: System Information

Parameter description:

 System Contact:

The textual identification of the contact person for this managed node, together

with information on how to contact this person. The allowed string length is 0 to

128, and the allowed content is the ASCII characters from 32 to 126.

 System name:

An administratively assigned name for this managed node. By convention, this is

the node's fully-qualified domain name. A domain name is a text string drawn

from the alphabet (A-Za-z), digits (0-9), minus sign (-). No space characters are

permitted as part of a name. The first character must be an alpha character. And

the first or last character must not be a minus sign. The allowed string length is 0

to 128.

 System Location:

The physical location of this node(e.g., telephone closet, 3rd floor). The allowed

string length is 0 to 128, and the allowed content is the ASCII characters from 32

to 126.

2-1.7 IP

The IPv4 address for the switch could be obtained via DHCP Server for VLAN 1. To manually

configure an address, you need to change the switch's default settings to values that are

compatible with your network. You may also need to establish a default gateway between the

switch and management stations that exist on another network segment.

Configure the switch-managed IP information on this page

Configure IP basic settings, control IP interfaces and IP routes.

The maximum number of interfaces supported is 8 and the maximum number of routes is 32.

Web Interface

To configure an IP address in the web interface:

1. Click Configuration, System, IP.

2. Click Add Interface then you can create new Interface on the switch.

3. Click Add Route then you can create new Route on the switch

4. Click Apply

Figure2-1.7: The IP configuration

Parameter description:

IP Configuration

 Mode:

Configure whether the IP stack should act as a Host or a Router. In Host mode, IP traffic

between interfaces will not be routed. In Router mode traffic is routed between all interfaces.

 DNS Server

This setting controls the DNS name resolution done by the switch. The following modes are

supported:

 From any DHCP interfaces

The first DNS server offered from a DHCP lease to a DHCP-enabled interface will be

used.

 No DNS server

No DNS server will be used.

 Configured

Explicitly provide the IP address of the DNS Server in dotted decimal notation.

 From this DHCP interface

Specify from which DHCP-enabled interface a provided DNS server should be

preferred.

 DNS Proxy

When DNS proxy is enabled, system will relay DNS requests to the currently configured

DNS server, and reply as a DNS resolver to the client devices on the network.

IP Interfaces

 Delete

Select this option to delete an existing IP interface.

 VLAN

The VLAN associated with the IP interface. Only ports in this VLAN will be able to access the

IP interface. This field is only available for input when creating an new interface.

 IPv4 DHCP Enabled

Enable the DHCP client by checking this box. If this option is enabled, the system will

configure the IPv4 address and mask of the interface using the DHCP protocol. The DHCP

client will announce the configured System Name as hostname to provide DNS lookup.

 IPv4 DHCP Fallback Timeout

The number of seconds for trying to obtain a DHCP lease. After this period expires, a

configured IPv4 address will be used as IPv4 interface address. A value of zero disables the

fallback mechanism, such that DHCP will keep retrying until a valid lease is obtained. Legal

values are 0 to 4294967295 seconds.

 IPv4 DHCP Current Lease

For DHCP interfaces with an active lease, this column show the current interface address,

as provided by the DHCP server.

 IPv4 Address

The IPv4 address of the interface in dotted decimal notation.

If DHCP is enabled, this field is not used. The field may also be left blank if IPv4 operation on

the interface is not desired.

 IPv4 Mask

The IPv4 network mask, in number of bits (prefix length). Valid values are between 0 and 30

bits for a IPv4 address.

If DHCP is enabled, this field is not used. The field may also be left blank if IPv4 operation on

the interface is not desired.

 IPv6 Address

The IPv6 address of the interface. A IPv6 address is in 128-bit records represented as eight

fields of up to four hexadecimal digits with a colon separating each field (:). For example,

fe80::215:c5ff:fe03:4dc7. The symbol :: is a special syntax that can be used as a shorthand

way of representing multiple 16-bit groups of contiguous zeros; but it can appear only once.

It can also represent a legally valid IPv4 address. For example, ::192.1.2.34.

The field may be left blank if IPv6 operation on the interface is not desired.

 IPv6 Mask

The IPv6 network mask, in number of bits (prefix length). Valid values are between 1 and

128 bits for a IPv6 address.

The field may be left blank if IPv6 operation on the interface is not desired.

IP Routes

 Delete

Select this option to delete an existing IP route.

 Network

The destination IP network or host address of this route. Valid format is dotted decimal

notationor a valid IPv6 notation. A default route can use the value 0.0.0.0or IPv6 :: notation.

 Mask Length

The destination IP network or host mask, in number of bits (prefix length). It defines how

much of a network address that must match, in order to qualify for this route. Valid values are

between 0 and 32 bits respectively 128 for IPv6 routes. Only a default route will have a mask

length of 0 (as it will match anything).

 Gateway

The IP address of the IP gateway. Valid format is dotted decimal notationor a valid IPv6

notation. Gateway and Network must be of the same type.

 Next Hop VLAN (Only for IPv6)

The VLAN ID (VID) of the specific IPv6 interface associated with the gateway.

The given VID ranges from 1 to 4094 and will be effective only when the corresponding IPv6

interface is valid.

If the IPv6 gateway address is link-local, it must specify the next hop VLAN for the gateway.

If the IPv6 gateway address is not link-local, system ignores the next hop VLAN for the

gateway.

Buttons

 Add Interface:

Click to add a new IP interface. A maximum of 8 interfaces is supported.

 Add Route:

Click to add a new IP route. A maximum of 32 routes is supported.

 Apply:

Click to save changes.

 Reset:

Click to undo any changes made locally and revert to previously saved values.

Page is loading ...

AFi SM24p-SFP- Owner's manual

AFi SM24p-SFP- Owner's manual

Related papers

Other documents