2. ALLEN & HEATH
  3. Xone 96
Xone 96

ALLEN & HEATH Xone 96 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the ALLEN & HEATH Xone 96 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
XONE:96—OPTIONAL RACK EARS FITTING INSTRUCTIONS (AP11672)
Kit Part Number: X:96-RKX
• Designed to allow permanent xing of the XONE:96 in a plinth or custom rack system.
• Ensure the power cable and any signal cables are disconnected before aempng to t the Rack Ears.
• Rack Ears x on to the sides of the mixer in one orientaon. Ensure the air vents are not obstructed.
• Fix in place using the supplied M4x8 screws using a torque seng of 2N/M
Package Contents:
6x M4 x 8 Pan POZI screws (AB4836)
2x XONE:96 Rack Ear (AA11671)
1x XONE:96 Rack Ears Fing Instrucons (AP11672)
Tools Required:
Pozi PZ2 Screwdriver
California Proposion 65 warning: This product may contain a chemical known to the State of California to cause cancer, or other birth defects or other reproducve
harm. For more informaon see: www.allen-heath.com/legal
Manufactured by: Allen & Heath Limited, Kernick Industrial Estate, Penryn, Cornwall. TR10 9LU UK | tel: +44 (0) 1326 372070 | www.allen-heath.com
/