ALLEN & HEATH Xone 96 Operating instructions
- Type
- Operating instructions
XONE:96—OPTIONAL RACK EARS FITTING INSTRUCTIONS (AP11672)
Kit Part Number: X:96-RKX
• Designed to allow permanent xing of the XONE:96 in a plinth or custom rack system.
• Ensure the power cable and any signal cables are disconnected before aempng to t the Rack Ears.
• Rack Ears x on to the sides of the mixer in one orientaon. Ensure the air vents are not obstructed.
• Fix in place using the supplied M4x8 screws using a torque seng of 2N/M
Package Contents:
6x M4 x 8 Pan POZI screws (AB4836)
2x XONE:96 Rack Ear (AA11671)
1x XONE:96 Rack Ears Fing Instrucons (AP11672)
Tools Required:
Pozi PZ2 Screwdriver
California Proposion 65 warning: This product may contain a chemical known to the State of California to cause cancer, or other birth defects or other reproducve
harm. For more informaon see: www.allen-heath.com/legal
Manufactured by: Allen & Heath Limited, Kernick Industrial Estate, Penryn, Cornwall. TR10 9LU UK | tel: +44 (0) 1326 372070 | www.allen-heath.com
-
1
ALLEN & HEATH Xone 96 Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ALLEN & HEATH XONE:23C User manual
-
ALLEN & HEATH XONE:43C User manual
-
ALLEN & HEATH Xone 96 Quick start guide
-
Allen-Heath Xone:22 User manual
-
ALLEN & HEATH Xone 43 Professional DJ Mixer User manual
-
ALLEN & HEATH Xone 23 Professional DJ Mixer User manual
-
-
-
-
Allen-Heath Xone:K2 Owner's manual
