Applications
Browning Meats
Vegetables
Soups
Sauces
Pasta
Rice
Pie Fillings
Gravies
Chili
Stews
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Stainless Steel
Steam Jacketed
Kettle
Table Top Mounted
Tilting
Self-Contained
Electric Heated
10-Quart Capacity
Short Form
Groen Model TDB/6-10
quart self-contained tilting
electric heated stainless
steel steam jacketed kettle
per Bulletin 144350. Kettle
body shall be one piece solid
welded construction with
heavy reinforced rim and
butterfly shaped pouring lip.
NSF and U.L. listed, ASME
code constructed for 50 PSI
maximum, and thermostatically
controlled to provide operating
temperatures between 150°
and approx. 295°(F). Compact
base designed for counter
top, table or stand mounting.
Requires single electrical
connection, specify 208 or
240 Volt, single phase service.
Made in U.S.A.
Model TDB 6-10 shown with optional TS9 stand.
Groen Table Top Kettles, Page 4
144350C
Revised 08/09
Table Top Kettles
model TDB/6-10
Description
Kettle shall be a Groen Model TDB/6-10 quart stainless
steel self-contained steam jacketed unit, operating from
an electric heated steam source contained within the unit,
per Bulletin 144350 and as follows:
Construction
Kettle shall be of 304 stainless steel, solid one-piece
welded construction. The console and all exposed sur-
faces shall be stainless steel. Unit shall be furnished with
a reinforced bar rim with a welded-in butterfly shaped
pouring lip for pouring control and durability. The operat-
ing handle lug shall be on the right side.
Compact steam generator and base gives unit an overall
width of only 19 inches. Base designed for countertop,
table or stand mounting. Faucet bracket is standard and
mounted on the trunnion support.
Finish
Interior of kettle shall be polished to a 180 emery grit
finish. Exterior of kettle shall be finished to a bright high
buff finish, ensuring maximum ease in cleaning and
maintaining brilliant appearance.
A.S.M.E Code, U.L. Listing, CRN Registered
Unit shall be A.S.M.E. shop inspected, stamped and
National Board registered for operation up to a maximum
working pressure of 50 PSI. Unit shall be U.L. listed for
sale in U.S.A. and Canada. Unit shall be registered in
Canada with CRN number.
Sanitation
Unit shall be designed and constructed to meet NSF
requirements and be NSF listed.
Cover
Optional. One piece lift-off cover available.
Self Contained Steam Source
Kettle shall have a 4KW electrically heated self-contained
heat source to provide kettle temperatures of 150°F to
approximately 295°F. Unit shall be factory charged with
chemically pure water and rust inhibitors, to ensure long
life and minimum maintenance.
Controls
Controls shall include a thermostat, built in contactor,
pressure gauge, water sight glass and heating indicator
light.
Safety Features
Kettle shall have safety tilt cut-off, pressure relief valve,
high limit pressure switch and low water cut-off.
Performance/Features
Unit shall be thermostatically controlled to automatically
shut off when desired temperature is reached and to turn
on when product temperature falls below desired setting.
Unit is designed to make it possible for one person to
tilt kettle, even when kettle is filled to capacity. Pouring
height allows filling of 6” high pans on the table top.
Installation
Single electrical connection required. Specify 208 or 240
Volt, single phase only. Four mounting bolts required for
base.
Options/Accessories
Basket insert
Water fill faucet
Lift-off cover
Stand Mounting (Model TS/9 stand available)
Gallon etch marks
316 stainless steel interior
Kettle brush kit
Origin of Manufacture
Kettle shall be designed and manufactured in the United
States.
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
2
. DIMENSIONS IN BRACKETS
[
]
ARE MM.
1
.
S
TANDARD
O
PERATIN
G
V
O
LTA
G
E
2
08
V
O
R 24
0
V
S
IN
G
LE PHA
S
E.
NO
TE
S
:
1
0 3/4
[
273
]
6
1/2
[
165
]
WAL
P
RE
SSU
RE
G
A
UG
E
WATER FILL
ASS
EMBLY
WATER LEVEL
G
A
UG
E
G
LA
SS
2
3 3/4
[
603
]
1
9
[
483
]
1
3/4
[
44
]
2
3/8
[
60
]
9
1/4
[
235
]
1
6
[
406
]
1
0 3/4
[
273
]
7
9/16
[
192
]
S
AFETY
VALVE
1
6 5/8
[
422
]
4
X
3/8
-1
6
M
OU
NTIN
G
COU
PLIN
GS
F
O
R B
O
LT
S
(
BOTTOM SIDE
)
E
LE
C
TRI
C
AL
CO
NN.
1
1/2
[
38
]
DIA
.
(
BACK SIDE
)
1
2.00
[
305
]
1
2
[
305
]
MAX
POU
R PATH
6
1/2
[
165
]
1
1
/
8 [28]
6
1/16
[
154
]
2
11/16
[
68
]
3
4
60
60
1
1
2
4
0
208
KW
HZ
P
HA
S
E
VO
LT
S
ELECTRIC SERVICE REQUIREMENTS
A
MP
S
17
15
P/N 123021 REV A
Model TDB/6-10
-
1
-
2
