Oasser P1 Operating instructions

Made in China

P 1

Operation Manual

Electric Inflator

Contents

English

Operation Manual

Product Structure

Technical Parameters

Note

Advice To Users

Portable Electric Inflator Guide

01

03

04

05

04

Deutsch

Bedienungsanleitung

Produktstruktur

Technische Daten

Hinweis

Hinweise für Anwender

Handbuch der tragbaren und elektrischen Luftpumpe

06

08

09

10

09

Italia

Manuale d’uso

Struttura del prodotto

Parametri Tecnici

Nota

Avviso per gli utenti

Guida pompa elettrica portatile

11

13

14

15

14

Español

Manual de uso

Descripción

Parámetros técnicos

Nota

Aviso a los usuarios

Guía del inflador portátil eléctrico

16

18

19

20

19

Page is loading ...

Operation Manual

English

Thanks for choosing Oasser P1 Mini Electric Inflator.

Please read this manual carefully before using it.

This inflator can be applied to cars, bicycles, moto-

rbikes, balls, inflatable toys and etc. Digital inflator can

measure the tyre pressure and be used as flashlight.

1. Rechargeable inflator should be well charged in

advance.

2. Please connect one end of air tube to inflator and

plug the other end of it to tyre valve core. For

French valve, it should be connected to the French

inflator at first.

3. Please press “UNIT” button to set pressure in PSI,

BAR, KPA, or kg/cm2 on activated screen.

4. Please press “+” & “-” to set the desired pressure.

5. Please press power switch to start inflating.

1

6. Repeatedly press “UNIT” button, the ATMOS will

transform to PSI, BAR, KPA, or kg/cm2. The screen

will show the real data.

7. “+” & “—” are preset keys. You can shortly press

them to set the desired pressure slowly, and long

press to set the desired pressure quickly (Reference

pressure : ordinary bicycle is 30~35psimountain

bicycle is 50~60psiroad bicycle is 80~100psicar

is 32~38psi). Setting will be completed after the

screen flashes for 4 seconds. Or you can press the

“UNIT” button to finish the setting. Then please

press power switch for inflating.

English

8. Digital inflator will stop inflating automatically when it

inflates the tyre to the preset pressure. Please press

power switch to turn off the LED light.

9. Please note that the tube will get hot after the

inflator has worked for a long time. So please don’t

pull out the tube from valve core and from inflator

until it’s cooled down. And then please store the

inflator and keep it dry.

2

Product Structure

“+” and “—”

”UNIT” key

Power switch

Charging port

LCD screen

Inflator

Air tube

Home adaptor

Car charger

1. Input voltage: adaptor 15V DC, cigarette lighter 12V

DC.

2. Max current: 5A.

3. Inflator efficiency: Inflate 26*1.95 mountain bicycle

tire from 0 to 50 psi in 2.5 minutes.

4. Max pressure: 150psi.

5. Operation temperature: -20+60

6. Size: 54.8(L)×44.8(W)×198(H)mm.

Technical Parameters

English

3

1. Children are forbidden to use this inflator. Please

keep it away from children.

2. Do not use it at inflammable and explosive areas.

(eg. Oil station)

3. To ensure the product has a long lifetime, please

have it rest for 8 minutes in every 8 minutes inflating

time.

4. Please stop the products for 15 minutes when the

temperature is too high or it has unnormal noise

when inflating.

5. Please keep it away from rain, water, falling, and

bumping.

6. Please have it charged every half year.

7. Please make sure the power is enough before using

the rechargeable inflator. If not, please check the

cigarette plug and fuse and ensure the inflator is

charging while inflating

Note

For your and other’s safety, please use the inflator and

accessories according to the the manual provided by

manufacturer. It may cause danger if you use methods

not mentioned in the manual.

Advice To Users

English

4

1. Tire pressure value is based on the recommended

value of the car factory, and the tire sidewall will

only shows the maximum inflation pressure in the

case of tire cooling; where you can find the standard

tire pressure information: Vehicle User Manual,

Driver Door Stickers, Storage Drawer, and Cylinder

Door.

2. Note: This electric inflator cannot be used for trucks,

vans, and buses.

3. 1PSI = 0.07Kgf/cm²= 0.07BAR = 7KPA

1Kgf/cm2 = 1BAR = 98KPa = 14.22PS

Portable Electric Inflator Guide

English

5

Oasser P1 Operating instructions

Oasser P1 Operating instructions

in other languages

Other documents