4 9/16"
[116mm]
9 3/8"
[238mm]
8"
[203mm]
Drop-In
Grid
12 5/8"
[91mm]
[321mm]
10 5/8"
3 9/16"
7/8"
[22mm]
6 7/16"
[270mm]
[163mm]
[252mm]
9 7/8"
[37mm]
1 7/16"
[110mm]
4 5/16"
[35mm]
1 3/8"
1 5/8"
[42mm]
Travelers Rest, SC: 800-476-4103
Sheet:
1
of
Product Specifications:
Scale:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
Travelers Rest, SC 29690
REG. #A2601
ISO #9001
08/02/10
Simi Valley, CA: 800-423-0150
Fax: 864-834-3518
Water Station w/ Pedestal Type Glass Filler,
18 Gauge Stainless Steel Drip Pan with Splashguard,
JHB
JRM
Approved
Drawn Checked
1:4
Date:
1/4" Tailpiece for Copper Tubing, 1-1/4" Drain
B-1235
DHL
www.tsbrass.com
2 Saddleback Cove / P.O. Box 1088
This Space for Architect/Engineer Approval
Job Name__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
2
Deck
Also Available to Fit
3/8" & 1/2" O.D. Tubing.
Solder Type Tailpiece
2"[51mm]
1.
Supplied w/ Mastic & Stainless Steel Screws for Mounting.
2.
to Verify Actual Cut Out Needed Prior to Installation.
Lever Arm
Torx Wrench Adjustable
Lexan Blue
to Fit 1/4" O.D. Tubing.
Adjustable Flange
Suggested Cut-Out Size for Pan is 10-1/2" x 5". Customer
Flow Outlet
Note:
18 Gauge Stainless Steel Pan w/ Beaded Edge.
Splashguard Frame
Around Back &
Sides of Pan
3 3/4"
[96mm]
1 1/2"
[38mm]
[106mm]
4 3/16"
[95mm]
5 7/16"
3 3/4"
[138mm]
[32mm]
1 1/4"
1 15/16"
[49mm]