AEG GYT11012SB User manual

Page is loading ...

4 www.aeg.com

A

B

C

D

E

Image 1

Package content

Contenu de l’emballage

Inhalt der Verpackung

Pakkens indhold

Pakkauksen sisältö

Innhold i forpakningen

Innehåll i förpackningen

Inhoud van de verpakking

Contenuto della confezione

HOT COLD

BOILING

WATER

Gray

Red

Blue

Image 2

Installation layout

Schéma d’installation

Installationsschaltplan

Installeringsoversigt

Asennuskaavio

Installasjonsskjema

Installationsritning

Installatieschema

Schema di installazione

Page is loading ...

7ENGLISH

CONTENTS

1. PRE-INSTALLATION INFORMATION..............................................................................

2. INSTALLATION...................................................................................................................

3. WORKING..........................................................................................................................

4. MAINTENANCE.................................................................................................................

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable

permormance for many years, with innovative technologies that help make life simpler

-features you might not find on ordinary appliances. Please spend a few minutes reading to

get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

Whem contacting our Authorised Service Centre, ensure that you have the following data

available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information.

General information and tips.

Environmental information.

Subject change without notice.

8

10

11

8 www.aeg.com

1. PRE-INSTALLATION

1.1 Important !

Qualified staff should read very carefully

these instructions before installation

and/or maintenance of the product.

1.2 Before installation and setting to

work

Attention ! The feeding pipes have

to be rinsed thoroughly before the

installation of the mixer, so that no

shavings, welding or hemp residual

or other dirt can be found in the

pipes. Foreign bodies can enter the

mixer through the rinsed pipes or the

general water plant and could damage

the washers/ring washers. In order to

guarantee a long use of the product,

install the angle valve equipped with

filter and clean them regularly.

Before the setting to work, unscrew the

aerator and rinse it very well.

Technical data

ã Maximum working pressure  bar

ã Recommended working pressure  bar

in case of water pressure higher than 

bar install pressure reducers)

1.3 Package content (Image 1)

A - Mixer

B - Base

C - Fastening set

D - Spacer for the fastening

E - Gaskets

9ENGLISH

1.4 Respecting this indications, will

mantain the warranty rights,

ensures the declared properties

of the products and warrant the

complete reliability.

OK

!

OK!

NO!

2 x Ø

ã Before assembling the

hose, please check the

appropriate crimping

of both sides of the

hoses.

ã Don’t tighten by tools.

ã Hand-tighten O-ring

seal connectors until

feeling a mechanical

rest.

ã Don’t set the hose in

the wall.

ã Tighten the hose

without any twis or

tension.

ã Prolonged contact wit

any substance, even

scarcely aggressive, can

cause external braid

damage and subsquent

flexible burst.

NO!

ã Before bending the

hose please consider a

straight part of 2 times

the external diameter.

ã Mantain minimum bend

radius (DN= nominal

internal diameter):

DN = 2mm

DN8 = 0mm

DN10 = mm

DN1 = mm

ã Hand-tighten

connectors with gasket

seal (nuts) then apply

1/ turn using an

appropriate wrench.

ã Do not expose the

hose to lateral stress

nor overtight by any

tool (ex. during the

installation of the

faucet stud or the drain

pop-up lever).

10 www.aeg.com

2. INSTALLATION

2 .1 Please follow exactly the following

sequence (Image 3)

2.2 For UK market

If necessary for network connections of

the taps and fittings use adapter /8 -

1/2" with the relative seals present in the

kit GYB06116XA.

2.3 Warning !

In case of "COMBI" configuration

for installation of the mixer valve

GYBMIX16XA and relative connections

pay attention to the directions in the

system’s handbook included in the

package of the boiler

3. WORKING

3 .1 Operation mixer side (Image 4)

ã Open the handle to the right to start

water supply; the more the handle is

opened the more water is supplied.

ã Turn up the handle to open cold water,

turn it down to open hot water.

3.2 Operation boiling water (Image 5)

The tap has a handle with safety function

(especially for kids) for boiling water

enabled with a pressure and rotation

motion. The handle retracts if released

and locks automatically.

WARNING ! The temperature of water

flow can reach values that may case

burnings.

3.3 Boiling water side use (Image 6)

To get the best results, for example to

prepare coffee or tea, it is necessary

to let “first water” flow. This allows

removing air bubbles. This allows

removing air bubbles that are in the

water and tend to form a layer of foam

on the preparation.

IMPORTANT ! keep the container to

fill so to contain completely the water

supply spout. So you avoid boiling water

splashes and the tap will be used safely.

Use only appropriate containers for high

temperature water.

3.4 Warning !

At the expiry of warranty terms

the product should undergo full

maintenance, first of all of all functional

parts, for an optimal use of the product.

This maintenance should be carried out

every two years by qualified staff.

11ENGLISH

4. MAINTENANCE

4.1 Directions for product cleaning

Water contains scale deposit in variable

quantity, which remains on the surface of

the product, leaving deposits once water

has evaporated. It is possible to prevent

the formation of scale deposits, and

keep your product clean drying it always

with a soft cloth immediately after use.

NEVER USE DETERGENTS, SOLVENTS,

CHEMICAL AGENTS, ABRASIVE MOPS,

METALLIC WIPES, ALCOHOL, ETC. that

would damage irremediably product

surfaces, damaging its esthetic, its gloss

and its satin finish.

CLEAN ONLY WITH WATER AND

NEUTRAL SOAP DRYING WITH A SOFT

CLOTH.

Page is loading ...

ET16-A-0201

www.aeg.com/shop

AEG GYT11012SB User manual

This manual is also suitable for

AEG GYT11012SB User manual

in other languages

Related papers

Other documents