LG LWA2CR2F Owner's manual

LG
Brand
LG
Model
LWA2CR2F
Category
Mobile air conditioners
Type
Owner's manual

This manual is also suitable for

LG LWA2CR2F1 is a window-type air conditioner with a range of features to keep you cool and comfortable during the summer months. With its powerful cooling capabilities, it can quickly lower the temperature of a room, providing instant relief from the heat. The adjustable fan speed allows you to customize the airflow to your liking, ensuring optimal comfort. Additionally, the automatic swing feature ensures that the cool air is evenly distributed throughout the room, preventing hot spots.

LG LWA2CR2F1 is a window-type air conditioner with a range of features to keep you cool and comfortable during the summer months. With its powerful cooling capabilities, it can quickly lower the temperature of a room, providing instant relief from the heat. The adjustable fan speed allows you to customize the airflow to your liking, ensuring optimal comfort. Additionally, the automatic swing feature ensures that the cool air is evenly distributed throughout the room, preventing hot spots.

OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : WINDOW
LG Electronics India Pvt. Ltd.
Regd. Office : A-27, Mohan Cooperative Industrial
Estate, Mathura Road, New Delhi-110044
www.lg.com
MFL37725125
Room Air Conditioner Owner’s Manual
TABLE OF CONTENTS
Caution while operating Air Conditioner ..................4
About the Controls on the Air Conditioner ...............8
Care and Maintenance ..........................................13
Installation Instructions............................................14
Before You Call for Service.....................................16
10 Easy steps to find AC Tonnage ........................17
Safety Precautions ..................................................3
Operating instructions
Installation Instructions
Troubleshooting tips
Safety precautions
-2-
FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
nStaple your receipt to this page in the event you need
it to prove date of purchase or for warranty issues.
READ THIS MANUAL
Inside you will find many helpful hints on how to use
and maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
of time and money over the life of your air conditioner.
You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call
for service at all.
PRECAUTION
• Contact the authorized service technician for repair or
maintenance of this unit.
• Please install your air-conditioner by company
authorised service franchisee / authorised service
and sales dealer.
• The air conditioner is not intended for use by young
children or invalids without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
• When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only,
using only genuine replacement parts.
We recommend usage of voltage stabilizer with
high / low voltage cut off in areas having voltage
fluctuations.
AC TONNAGE STABILIZER KVA
(3-STEP STABILIZER)
0.75
1.0
1.5
2.0
3
3
4
5
-3-
Safety Precautions
To prevent injury to the user or other people and proper ty damage, the following instructions
must be followed.
nIncorrect operation due to ignoring instruction will cause harm or damage. The seriousness
is classified by the following indications.
nMeanings of symbols used in this manual are as shown below.
WARNING
CAUTION
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injur y or damage to proper ties only.
WARNING
nInstallation
Be sure not to do.
Be sure to follow the instruction.
Don’t use a power cord, a
plug or a loose socket which
is damaged.
•
Otherwise, it may cause a fire
or electrical shock.
Always plug into a grounded
outlet.
• Otherwise, it may cause a fire
or electrical shock.
Do not modify or extend the
power cord length.
• It will cause electric shock or fire
due to heat generation.
Do not disassemble or
modify products.
• It may cause failure and
electric shock.
Be caution when unpacking
and installing.
• Sharp edges may cause
injury.
Do not use the power cord near
flammable gas or combustibles
such as gasoline, benzene,
thinner, etc.
• It may cause explosion or fire.
CAUTION WHILE OPERATING AC
-4-
nOperation
Do not place the power cord
near a heater.
• It may cause fire and electr ic
shock.
Do not allow water to run
into electric parts.
• It will cause failure of machine or
electric shock.
Use a soft cloth to clean. Do
not use wax, thinner, or a
strong detergent.
• The appearance of the air
conditioner may deteriorate,
change color, or develop surface
flaws.
Ventilate the room well when
using this appliance
together with a stove, etc.
• An oxygen shortage may occur.
Turn off the power and
breaker firstly when
cleansing the unit.
• Since the fan rotates at high
speed during operation, it may
cause injury.
Turn off the main power
switch when not using it for
a long time.
• Prevent accidental startup and
the possibility of injury.
Unplug the unit if strange
sounds, odors, or smoke
come from it.
• Otherwise it may cause fire and
electric shock accident.
Do not open the suction
inlet grill of the product
during operation.
• Otherwise, it may electrical
shock and failure.
If water enters the product, turn
off the the power switch of the
main body of appliance. Contact
service center after taking the
power-plug out from the socket.
Do not place heavy object
on the power cord and take
care so that the cord should
not be pressed.
• There is danger of fire or electr ic
shock.
Do not share the outlet with
other appliances.
• It will cause electric shock or fire
due to heat generation.
Take the power plug out if
necessary, holding the head
of the plug and do not touc h
it with wet hands.
• Otherwise, it may cause a fire
or electrical shock.
Ceiling
Floor
CAUTION
nInstallation
Do not operate or stop the
unit by inserting or pulling
out the power plug.
• It will cause electric shock or fire
due to heat generation.
Do not damage or use an
unspecified power cord.
• It will cause electric shock or fire.
Do not operate with wet
hands or in damp
environment.
• It will cause electric shock.
Hold the plug by the head
when taking it out.
• It may cause electric shock and
damage.
When gas leaks, open the
window for ventilation
before operating the unit.
• Otherwise, it may cause
explosion, and a fire.
Never touch the metal parts
of the unit when removing
the filter.
• They are sharp and may cause
injury.
Install the product so that
the noise or hot wind from
the outdoor unit may not
cause any damage to the
neighbors.
• Otherwise, it may cause
dispute with the neighbors.
Keep level parallel
in installing the product.
• Otherwise, it may cause
vibration or water leakage.
-5-
Installation not to be done
on the place not able to bear
the installation load.
nOperation
Be cautious not to touch the
sharp edges when
installing.
• It may cause injury.
Avoid excessive cooling and
perform ventilation
sometimes.
• Otherwise, it may do harm to
your health.
Do not insert the hands or
bars through the air inlet or
outlet during operation.
• Otherwise, it may cause
personal injury.
Do not put a pet or house
plant where it will be
exposed to direct air flow.
• It may cause injury.
Do not block the inlet or
outlet of air flow.
• It may cause product failure.
Use a soft cloth to clean. Do
not use wax, thinner, or a
strong detergent.
• The appearance of the air
conditioner may deteriorate,
change color, or develop surface
flaws.
Do not step on the
indoor/outdoor unit and do
not put anything on it.
• It may cause an injury through
dropping of the unit or falling
down.
Always insert the filter
securely.
Clean it every two weeks.
• Operation without filters will
cause failure.
Do not drink water drained
from air conditioner.
• It contains containments and will
make you sick.
-6-
1. Contact an installation specialist for installation.
2. Plug in the power plug properly.
3. Use a dedicated circuit.
4. Do not use an extension cord.
5. Do not start/stop operation by plugging/unplugging the power cord.
6. If the cord/plug is damaged, replace it with only an author ized replacement
part.
1. Being exposed to direct airflow for an extended period of time could be
hazardous to your health. Do not expose occupants, pets, or plants to direct
airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used
together with stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g.
preserving precision devices, food, pets, plants, and art objects). Such usage
could damage the items.
1. Do not touch the metal par ts of the unit when remo ving the filter. Injuries can
occur when handling sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can
destroy the insulation, leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and breaker are turned
off. The fan rotates at a very high speed during operation. There is a
possibility of injury if the unitÕs power is accidentally triggered on while
cleaning inner parts of the unit.
For repair and maintenance, contact your authorized service dealer.
Usage
Cleaning and Maintenance
Service
Before Operation
-7-
4. Remove the power plug if not using the unit for a long time.
Preparing for Operation
How to Insert the Batteries
Remove the cover from the back of the remote
controller.
Slide the cover according to the arrow direction.
Insert the two batteries.
Be sure that the (+) and (-) directions are correct.
Be sure that both batteries are new.
Re-attach the cover.
Slide it back into the position.
Do not use rechargeable
batteries, such batteries differ
from standard dry cells in shape,
dimensions, and performance.
Remove the batteries from the
remote controller if the air
conditioner is not going to be
used for an extended length of
time.
1
2
3
-8-
About the Controls on the air conditioner
THERMOSTAT (TEMPERATURE)
The THERMOSTAT/TEMPERATURE is used to maintain the room temperature. The
compressor will cycle on and off to keep the room at the same level of comfort.
When you turn the knob to a higher number (the right side) and the indoor air will
become cooler. The temperature is selected by turning the
Thermostat/temperature knob to the desired position.
The 5 or 6 position (the middle position of arc) is a normal setting for average
conditions.
If you move the switch from a cool setting to
NOTE:
off or to a fan setting, wait at least 3
minutes before switching back to a cool
setting.
COOLING DESCRIPTIONS
For Normal Cool ing- Select High Cool
or Med Cool with the OPERATION knob
at the midpoint of THERMOST AT/
TEMPERA TURE knob(as mentioned in
fig.1 & fig.2)
For Maxi mum Cooling- Select High
Cool with the OPERATION knob at
OFF: Stop all operation.
FAN: Circulates filte red air.
LOW COOL: Switches on the compressor and air
cooling operation at low fan speed.
MEDIUM COOL: Switches on the Compressor and
air cooling operation at medium fan speed.
HIGH COOL: Switches on the compressor
and air cooling operation at high fan speed.
LOW FAN: Circulates filte red at low
speed.
MED FAN: Circulates filte red air at
medium speed.
TEMPERATURE OPERATION
AUTO SWING
Wait for 3 minutes before restart
Cool Coolest
Off On
Off
High
Cool
Med
Fan
Low
Cool
Med
Cool
Low
Fan
Cooling Model (Fig.1)
Thermostat
Coo l Coo lest
Wait for 3 minutes before restart
Operation
Auto Swing
Off
On
Med
Fan
High
Cool
Low
Fan
Med
Cool
Low
Cool
Off
5
6
4
3
2
1
9
8
7
Cooling Model (Fig.2)
your
the highest number available on
Thermostat/temperarure
knob(position 6~9 in fig.2)
For Quieter & Nighttime Cooling
Select Low Cool with the
OPERATION knob at the midpoint of
Thermostat / Temperature
(position 1~4 in fig.2)
knob
TEMPERATURE OPERATION
Cool Coolest
Off
High
Cool
Med
Fan
Low
Cool
Med
Cool
Low
Fan
Cooling Model (Fig.3)
-9-
( )
2 b
3
5
6
2
4
1
DOWN UP
POWER
FAN SPEED
TIMER COOLING/FAN
ENERGY SAVER AUTO SWING
3
5
6
2
4
1
DOWN UP
POWER
FAN SPEED
TIMER COOLING/FAN
ENERGY SAVER AUTO SWING
( )
2 b
Type 1
22
2 3
Mode Timer
4
5
6
1
7
Fan Speed Temp
ON/OFF
Fan
Cool On
Dry Energy Saver
V
V
AUTO
SWING
FAN
SPEED
22
5
1
Temp Power
Fan
Cool
Timer
V
V
7
Mode Timer
COOL
DRY
FAN
TEMP
88
ENERGY SAVER ON
FAN
SPEED
AUTO
SWING
ON/OFF
(e)
ENE RG Y S AV ER
5
Temp
42
7
3 6 1
COOL
FAN
TEMP
88
ON/OFF
5
Temp
1
7
V
V
S
d
F n
pe
e
a
Sle
p
e
o
M
d
e
i
r
T m
e
o
Aut
S
g
i
n
w
i
A
r
r
r
u ie
Pf i
P
e
w
o r
1
4
2
63
9
8
5
V
V
a
n
p
e
d
F e
S
p
e
e
S
l
Mo
e
d
m
e
Ti
r
u
o
A
t
gn
w
S
i
ow
e
P r
1
4
2
63
9
5
5
6
2
4
1
TEMP
POWER
FAN SPEED
MODE
AUTO SWING
Your Panel may look like any
of below mentioned panels.
REMOTE CONTROLLER
3
5
6
2
4
1
2(b)
MODE FAN
TIMER
TEMP
POWER
1
2
3
4
5
8
Air
Purifier
FUZZY
DRY JET
ENERGY
SAVER
INDOOR DESIRED
88 88
CLEAN
FILTER
AIR
FILTER
MODE FAN
TIMER
TEMP
POWER
1
2
3
4
5
6
AUTO SWING
FUZZY
DRY JET
ENERGY
SAVER
INDOOR DESIRED
88 88
CLEAN
FILTER
AIR
FILTER
V
V
p
F
a e
e
n S
d
p
S e
le
e
M
d
o
T
m
e
r
i
Au
t
o
S
i g
w n
Ai
r
u
f r
P r
i
i e
rP
w
o e
1
4
2
63
9
8
5
V
V
S
e
e
d
an
F
p
e
p
S
e
l
de
Mo
m
r
i e
T
Au
t
o
Sw n
i g
P
o
w r
e
1
4
2
63
9
5
ON OFF
PLASMA
SET
CANCEL
7
1
3
2
5
4
On/Off
Fan Cool
Dry
Temp
E n e r gy
S a v e r
Fan
Speed
Timer Mode
Power
2(b)
3
5
2
4
1
Power
Temp
Fan Speed
Timer Mode
Energy
Saver
REMOTE CONTROLLER
Type 2
Type 3
Type 4
Type 5
Type 6
-10-
AUTO RESTART
In failure of electric power the unit runs as previous setting operation when power returns.
FAN SPEED SELECTOR
Select the fan speed in Three steps Low (F1) / Med. (F2) / High (F3)
ROOM TEMPERATURE SETTING BUTTON
Control the room temperature within a range of 16°C to 30°C.
AUTO SWING
The vertical louver swings horizontally by the automatic system and stops when you press the
button again.
SIGNAL RECEIVER
4
5
6
7
Fan speed in two steps Low (F1) / High (F2) in select models.
Operation modes may vary in select models.
NOTE: ‘SLEEP’ and ‘TIMER’ function cannot operate at same time.
SLEEP BUTTON
9
AIR PURIFIER (For Plasma Model)
Used to start or stop plasma purification system. Clean filter indication will be 'ON' on panel,
when filter cleaning is required.
8
Sleep function can be set by one hour for a maximum of 7 hours. In the first 30 minutes set
temperature increases by 1°C and in the next 30 minutes temperature increases by another
1°C, this temperature then remains till the timer function is deactivated. This is how the
sleep function behaves. The fan speed will change to low speed(F1).
ON/OFF TIMER
Set the time of on/off operation. The timer can be set by the one hour for a maximum of 12 hours.
In the first 30 minutes set temperature increases by 1°C and in the next 30 minutes temperature
increases by another 1°C, this temperature then remains till the timer function is deactivated.
3
Controls
The Remote Control unit will not function properly if strong light strikes the sensor
window of the air conditioner or if there are obstacles between the Remote Control
unit and the air conditioner.
Precaution:
POWER // (ON/OFF) BUTTON
Operation starts, when this button is pressed and stops when you press the button again.
OPERATION MODE SELECTION BUTTON
Select (A)Cool (B)Energy Saver (C)Fan & (D)Dehumidification (dry) with this button.
1
2
(A)
(B)
Coll Mode : Switches on compressor & circulates cool air.
Energy Saver Mode : Switches ON compressor & circulates cool air, Switch OFF compressor
& fan after attaining set temperature. After 3 Mins, fan switches ON and cycle repeats.
(C)
(B)
Fan Mode : Circulates room air without cooling (Compressor will be in switched off mode)
Dry Mode : Unit will run at low fan speed with compressor ON. When compressor
is OFF, fan will be OFF.
-11-
a) Super Cool / 18°C : 18°C Temperature Setting.
b) Cool / 21°C : 21°C Temperature Setting.
c) Comfort / 24°C : 24°C Temperature Setting.
d) (e) Saver / 27°C : 27°C Temperature Setting.
1
2
POWER BUTTON
MODE
Select (a) Turbo (b) Silent (c) High Fan & (d) Low Fan with this button.
(a) Turbo / High Cool : Switches on compressor and air cooling operation at high fan speed.
(b) Silent / Low Cool : Switches on compressor and air cooling operation at low fan speed.
(c) High Fan : Circulates filtered air at high speed.
(d) Low Fan : Circulates filtered air at low speed.
It is recommended to select 'Silent ' for Normal Cooling Operation and select
'Turbo / High Cool' for maximum cooling requirement.
/ Low Cool
3
TEMP
Controls oom temp. from 1 °C to 2 °C with step of °C.R 8 7 3
4
AUTO SWING
5
FAN SPEED
Select fan speed in two steps - High/Low.
Controls
The Remote Control unit will not function properly if strong light strikes the sensor
window of the air conditioner or if there are obstacles between the Remote Control
unit and the air conditioner.
Precaution:
Operation starts, when this button is pressed and stops when you press the button again.
The vertical louver swings horizontally by the automatic system and stops when
you press the button again.
REMOTE CONTROLLER
3
Auto
Swing
Mode
2
Temp
1
HIGH COOL
LOW COOL
HIGH FAN
LOW FAN
4
Type 2
3
4
2
5
1
TEMP
POWER
FAN SPEED
MODE
AUTO SWING
3
Auto
Swing
Mode
2
Temp
1
Turbo
Silent
High
Fan
Low
Fan
Super
Cool
Cool
Comfort
Saver
(e)
4
Type 1
27°C
24°C
21°C
18°C
ON/OFF
-12-
Vent Control
The vent control is located above the
control knobs.
When set at CLOSE, only the air inside
the room will be circulated and
conditioned. When set at OPEN, some
inside air is exhausted outside.
To open the vent, pull the lever toward you.
To close it, push it in.
Air Direction
The direction of air can be controlled
horizontally or vertically by using the
horizontal louver or vertical louver.
The horizontal air direction is adjusted
by setting the AUTO SWING switch to
the ON position.
Horizontal Air-Direction
Vertical Air-Direction
Fingertip pressure on the bank of horizontal
louvers adjusts the air direction up or down
CLOSE VENT OPEN
Additional controls and important information.
Parts Information
CABINET
FRONT GRILLE
AIR FILTER
AIR INTAKE(INLET GRILLE)
AIR DISCHARGE
Learning parts name prior to installation will help you understanding the installation procedure.
1.
2.
3.
4.
5.
VERTICAL AIR DEFLECTOR
(HORIZONTAL LOUVER)
6.
EVAPORATOR
7.
HORIZONTAL AIR
DEFLECTOR
(VERTICAL LOUVER)
8.
CONTROL BOARD
POWER CORD
COMPRESSOR
BASE PAN
BRACE
CONDENSER
PLASMA FILTER ASSY.
9.
10.
11.
12.
13.
14.
15.
2 31 4 5
6
15
7
8
9
10
11 12
13
14
-13-
Care and Maintenance
Grille and Case
Turn the air conditioner off and remove the plug
from the wall outlet before cleaning.
To clean, use water and a mild detergent. Do not
use bleach or abrasives.
Air Filter
Ensure the power is off before open the front Grill.
The air filter behind the front grille should be checked and cleaned
at least once every 2 weeks or more often if necessary.
The grille is designed to clean the filter downward.
To remove:
Open the inlet grille upward by pulling out the bottom of the
inlet grille. (Refer Fig. 1)
Using the tab, pull up slightly on the filter to release it and pull
it down (Fig. 1). Slide out five filter from grill (fig. 2).
Clean the filter with warm, soapy water below 40°C (104°/F).
Rinse and gently shake the water from the filter and let it dry
before replacing it.
CAUTION:
DO NOT operate the air conditioner without a filter
because dirt and lint will clog it and reduce
performance.
Drainage
In humid weather, excess water may cause the BASE PAN to overflow.
To drain the water, remove the DRAIN CAP
To remove the condensed water, you can install the drain pan as below.
Take the drain pan which is located in the air discharge.
Install the drain pan to the right corner of the cabinet with 4 screws.
Connect the drain hose to the outlet located at the bottom of the drain
pan. You can purchase the drain hose or tubing locally to satisfy your
particular needs. (Drain hose is not supplied).
1.
2.
3.
1
2
3
4
1
2
CABINET
DRAIN
PAN
SCREW
DRAIN HOSE
(Optional)
DRAIN CAP
BASE
PAN
BASE
PAN
DRAIN
CAP
(Fig. 1)
Important
Long-off period maintenance
1)If the air conditioner is not going to be used for a long period, run the Air-conditioner with the
setting in FAN Mode only and the fan speed on "HIGH" for about half an hour, to dry the whole
Air-conditioner.
2)After a long off period when you are going to use the air conditioner again, repeat above point
no. 1.
Caution
There will possibly be foul smell when the machine is started after a long time (1 week). This is due
to various odours emitted by smoke, foodstuff, cosmetics and others, which syicks to the Air Filter
and Evaporator coil. Hence, clean the Air Filter and the Evaporator before you start the machine
after long time to avoid foul smell.
(Fig. 2)
-14-
Select the Best Location
To prevent vibration and noise, make sure the unit is installed securely and firmly.
Install the unit where the sunlight does not shine directly on the unit.
There should be no obstacle, such as a
heat radiation of the condenser.
fence or wall, within 50cm from the back of the cabinet because it will prevent
Restriction of outside air will greatly reduce the cooling efficiency of the air conditioner.
Install the unit a little obliquely outward not to leak the condensed water into the room (about 10 ~ 15mm or 1/4
bubble with level).
CAUTION:
All side louvers of the cabinet must remain exposed to the outside of the structure.
Remove the Air Conditioner From the Case
Remove the 2 shipping screws from the
back of the case.
Remove the 2 screws on each side of the
case. Keep these for later use.
Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case.
A
B
C
D
A
B
C
Shipping screws
Installation Instructions
Side View
Ceiling
Over 100 mm
Over 110 mm
Room AC
Indoor
10mm
Over 1200 mm
Outdoor
Position A
Wall
Floor
Top View
Wall
Over 1000 mm
Over
200 mm
Over
200 mm
Wall
Wall
Indoor
AC Top
Front View
Side View
15mm
Wooden frame 45~50mm
About 45mm
Room AC
Unit Width 'A'
Unit
Height
'B'
Horizontal
Line
-5 ~ +5mm
25mm
8~10mm
About 400~500mm
Wall
Window Width "A"
Window
Height
"B"
A
B
600
470
380
355
660
428
12000 Btu/h
9000 Btu/h
18000 Btu/h
CATEGORY
22000 Btu/h
660
428
-15-
Installation Instructions
Install the Air Conditioner in the Case
Slide the air conditioner into the case.
Reinstall the screws removed earlier on
each side of the case.
CAUTION:
The power cord must be connected to
an independent circuit.
The green wire must be grounded.
Stuff the foam between the unit and the
wall to prevent air and insects from getting
into the room.
Before installing the front grille, pull out the
vent control lever located above the unit
control knobs, as shown.
Attach the front grille to the case by
inserting the tabs on the grille into the slots
on the front of the case. Push the grille in
until it snaps into place.
Lift the Inlet grill and secure the front grill
with a screw Lower the inlet grill into place.
The maximum lift angle should not be more
than 75°
Max opening angle 75 degree**
A
B
D
E
F
Fix Holder lock with base pan & cabinet
with screw to prevent machine from
sliding out of cabinet from back grill side
(Anti theft locking)
C
Power Cord
Screw
Screw
The Foam
When you detach the
front grille from the
case, push the grille
to your rightside and
pull it toward you.
Deo-filter*
* Deo-filter available in select Models.
Remove Deodorizing filter carefully from the grill, shake
clean it by hand & keep it in sunlight for one hour to
activate it again; once it is choked.
G
** Grill lifting features available in
selected models
To fix the grill with cabinet, screw it
from both sides
-16-
Before you call for service...
Normal Operation
You may hear the thermostat click when the compressor cycles on and off.
Water will collect in the base pan during high numidity or on rainy days. The water may overflow
and drip from the outdoor side of the unit.
The fan may run even when the compressor does not.
Abnormal Operation
Problem
Possible Causes
What To Do
Air conditioner
does not start
The air conditioner is
unplugged.
The fuse is blown/circuit
breaker is tripped.
Power failure.
Air conditioner
does not cool as it
should
Airflow is restricted.
THERMOSTAT control set
too warm.
The air filter is dirty.
The room may have been
hot.
Cold air is escaping.
Cooling coils have iced up.
Air conditioner
freezing up
Ice blocks the air flow and
stops the air conditioner
from cooling the room.
Make sure the air conditioner plug is pushed
completely into the outlet.
Check the house fuse/circuit breaker box and
replace the fuse or reset the breaker.
If power failure occurs, turn the OPERATION control
to OFF( O ) . When power is restored, wait 3 minutes
to restart the air conditioner to prevent tripping of the
compressor overload.
Make sure there are no curtains, blinds, or furniture
blocking the front of the air conditioner.
Turn the THERMOSTAT knob clockwise to a cooler
setting.
Clean the filter at least every 2 weeks.
See the operating instructions section.
When the air conditioner is first turned on you need
to allow time for the room to cool down.
Check for open furnace floor registers and cold air
returns.
Set the air conditioner's vent to the closed position.
See Air Conditioner Freezing Up below.
Set the OPERATION control at fan or HIGH cool with the
THERMOSTAT at the warmer position or the temperature
at more than 23°C.
Hissing Noise- Sound of liquid refrigerant passing througe the system.
AC Operation
is Noisy
Glass pane vibrating.
Glass are to be penned
May be sound of
condensate water.
It is normal (Generally highing only)
(To avoid the noise, remove draing side knob & insert drain pipe
for proper drainge)
Installation levelling not
not proper.
Get it levelled properly.
Unit does not
Cool upon
restart
Compressor not starting
due to 3 minute delay
internally.
This is normal.
If you restart the air conditioner within 3 minutes after turning it
off a protective device will work to shut it off for 3 minutes.
-17-
10 Easy Steps to find out your AC tonnage
Dear Customer,
Please follow Below mentioned 10 easy steps to find out the AC tonnage required for your room.
Example : For Room size 15 feet(L) x 12 feet(B) x 10 feet(H) with one window 4 feet x 3 feet exposed to
sun (west) & one wall exposed to sun (east).The room is on First floor with ceiling not exposed to sun.
The no. of persons occupying the room is 4 nos. The appliance load is – 2 tube lights, 1 Computer & 1 TV.
Calculate the AC tonnage required.
As per steps given above : room volume : 15*12*10 = 1800 cu. Ft. , window area = 4*3=12 sq.ft.,
Wall area (east) = 15*10=150
Step1 = 3 Step6 = 2
Step2 = 2 Step7 = 2
Step3 = 0 Step8 = 0
Step4 = 0 Step9 = 1
Step5 = 1 Step10= 3
Total score = 14
1.5T Window AC
(From Score table)
Score Table
Score
1~5
6~10
11~17
18~25
AC recommended
0.75Tr
1.0Tr
1.5Tr
2.0Tr
Parameter
Score
Room Volume (Cubic feet)
upto 1000
1001 ~ 2000
2001 ~ 3000
3001 ~ 4000
Window Area exposed to sun
(in sq. ft.) - (West facing)
upto 10
11 ~ 20
21 ~ 30
Window Area exposed to sun
(in sq. ft.) - (other directions)
upto 10
11 ~ 20
21 ~ 35
36 ~ 50
Wall Area exposed to sun
(in sq. ft.) - (West facing)
100
150
200
300
Wall Area exposed to sun
(in sq. ft.) - (other directions)
100
150
300
500
3
4
5
2
1
2
3
0
1
2
3
0
1
2
3
1
2
3
4
Parameter
ScoreStep
Walls area - not exposed to
sun (in sq. ft.)
100
300
600
1000
No. of persons occupying
room
2
4
6
8
Ceiling area exposed to sun
(in sq. ft.)
200
300
400
Ceiling area if not exposed to
sun (in sq. ft.)
200
300
400
Total Appliance Load (tube
light-40w / Computer-
75w, CTV - 75 etc.)
100W
250W
500W
0
1
2
3
1
2
3
4
1
2
3
0
1
2
2
3
4
6
7
8
9
10
Step
1
2
3
4
5
Email : [email protected]
LG Electronics
For any further information, please contact LGEIL Branches
www.lgindia.com
[email protected]
1800-180-9999
5757554
(Toll Free) (Send SMS)
BRANCH BRANCH OFFICE ADDRESS PHONE NO. / FAX NO.
Ahmedabad
Asansol
Aurangabad
Bangalore
Bhopal
Bhubaneshwar
Calcutta
Chandigarh
Chennai
Cochin
Coimbatore
Delhi
Dehradun
Gurgaon
Ghaziabad
Guwahati
Hyderabad
Hubli
Indore
Jaipur
Jammu
Jodhpur
Karnal
Lucknow
Ludhiana
Mumbai(N & S)
Nagpur
Patna
Pune
Rajkot
Raipur
Ranchi
Surat
Thane
Varanasi
Vijaywada
Warangal
Kozhikode
LGEIL, 233-234, Platinum Plaza, Nr. Judges Bunglow Cross Road, Bodakdev,
Ahmedabad-54
LGEIL, Block-E, Ist Floor, P C Chattarjee Market, Rambandhu Tala, GT Road (E)
Asansol-713303
LGEIL, 302 CIDCO No. 3, Opp. Hotel Ramgiri, Jalna Road, Aurangabad-431003
LGEIL, No. 914, 2nd Floor, Shri Venkateshwara Complex, Opp. IBP Petrol Bunk,
80ft Road, 6th Block, Koramangala - Banglore - 560095
LG Electronics India Private Limited, 2nd Floor, Alankar Complex, Plot No. 10,
M.P. Nagar, Zone-II, Bhopal-462011
LGEIL, Plot No. 02,1st Flr., Bapuji Nagar, Bhubaneshwar-751009
LGEIL, 1, Ho-Chi-Min-Sarani, 6th Floor, Metro Towers, Calcutta-700071
LGEIL, SCO No. 142-143, 3rd Floor, Sector-34A, Chandigarh-160002
LGEIL, AA11, 2nd Avenue, Fatima Tower, Anna Nagar West, Chennai-600040
LGEIL, 40/1270, Vasudeva Buildings, T.D. Road, Ernakulam Cochin-682011
LGEIL, 250A, Sanganur Main Road, Kannappa Nagar, Coimbatore-641027
LGEIL, A-27, Mohan Co-operative, Industrial Estate, New Delhi
LGEIL, M-22, Commercial Motors Compound, Mohabewala Indl. Area,
Delhi-Saharanpur Road, Dehradun (Uttarakhand)
LGEIL, IInd Flr, A Block, Centre Point Bldg, Sushant Lok , Ph-I, Gurgaon-122001
LGEIL, J-10, RDC Rajnagar, Ghaziabad - 201001
LGEIL, Shantineer Bhawan, C K Aggarwal Path, Chenikurthi, Guwahati-781003
LGEIL, 1st Floor, Survey No. 54, Pulla Reddy Building, Vikarampuri,
Main Road, Kharkhana, Secunderabad-500009
LGEIL, 1 Floor, Above Bellad & Co., Near Bannigida Busstop, Gokul Road,
Hubli-580030
LGEIL, 3rd flr., 304 Bansi Trade Centre, 581/5 M.G. Road, Indore-452003
LGEIL, B-71, Sahakar Marg, Lal Kothi Scheme, Jaipur-302015
LGEIL, Plot No. 52, Yard No. 6,Transport Nagar, Narwal, Jammu-180006
LGEIL, 22(1-A)/21(2-B)/2, RIICO Heavy Industrial Area, Jodhpur-342003
LG Electronics India Pvt Ltd, Super Tyre Building, Near New Anaj Mandi,
Opp. New World Restauarnt, G.T. Road Karnal, Haryana
LGEIL, B-537, Hari Kunj, Keshav Nagar, Sitapur Road, Lucknow-226020
LGEIL, Village Jhande, Near Badowal Railway Station,
Opp. Ferozpur Road, Ludhiana.
LGEIL, Trade Star, 4th Floor, A Wing, J.B. Nagar, Andheri Kurla Road,
Andheri (E) Mumbai-400059
LGEIL, 5A, Road No.13, Behind Msrtc Workshop, MIDC Hinga, Nagpur-440016
LGEIL, 2nd Floor, Ankit Chandra Deep Complex, Bander Bageecha,
Near Samrat Hotel, Patna-800001.
LGEIL, 105/106, Premium Point, GM Road, Opp. Modern High School,
IIIrd Floor, Shivaji Marg, Pune-411005
LGEIL, Sanskruti Apartment, Opp. Dr. Ambedkar Bhawan, Near Atithi Chowk,
Akshar Road , Rajkot - 360004
613 to 616, 6th Floor, Offizo, Magneto - The Mall, GE Road,
Raipur - 492001
LGEIL, 402, Commerce Tower, Opp. Gel Church Complex, Main Road, Ranchi
LGEIL, 1001-1004, Ascon Plaza, IInd Flr, Anand Mahal Road,
Behind Bhulka Bhavan School, Adajan, Surat-395009
LGEIL, Gall Shop No - 206,207, 2nd Floor, Sai Plaza , Above Vijay Sales
Opp. Cine Wonder Mall, Ghodbunder Road , Thane(West)-400607
LGEIL, Pama Complex, DLW, Lahartara Road, Shivdaspur, Manduadih,
Varanasi, UP-221002
LGEIL, Door No. 32-2/1-7, Ratnamamba Street, Prajasakti Nagar,
Vijaywada-520010, Andhra Pradesh
LGEIL, House No. 1-8-598/1, First Floor, Beside HDFC Bank, Nakkalgutta,
Hanamakonda-506001 (Warangal)
3/568, Thripuri Building, Wayanadu Road, First Floor,Near K.S.F.E,
East Nadakkavu, Calicut-673011
40040013-14
3292009/3292010 (Fax) 2215170
5625705 / (Fax) 2474055/32095436/32095437/32095438
41145145/41144750/41144751
4262847/4229861 (Fax) 4262848
2531430, 2534280
22883254 (51) Fax
5087389\90 (Fax) 5089107
65510501~04 (Fax) 26203506
2369765/2369743/2370744/4027444/4027555/2360977 (Fax)
2332197, 2332195
26991412/11/13 (Fax) 26991410
2644213/283
4047461- 62 - 63/4272867, 4047460 (Fax)
9811354152/3/64/65/266
2663895/2666958/2665983/2668984 (Telefax)
27207504, 05, 06/27204094 27201462 (Fax)
4250251/52
4065523~24, 4082157 (Fax)
5111118/5113028/5105392, 5111540 (Fax)
2477420, 2477419, 2474396, 2474384
2742384, 392 / 5120030 (Fax)
2219201, 2219202 (Telefax)
2757538,39,2759121 (Fax) 2757559
2804412 - 19
28352882-2887 / 28352889 (Fax)
235120, 235122, Fax : 234401
3298714, 2541845 (Fax)
66030100,732/733/734/735, 66030740 (Fax)
2481499,2467692 (Fax)
4053171/4037470 (Fax) 4038426/10/11
3294026, 2331815
2730982/83, 2730984 (Fax)
25472633/2637 25472602(Fax)
2373432/36/37
2497283/87, (Fax) 2497284
2551453
2366755, 2366756, 2366678, (Fax) 2766678
Disposal of your old appliance (as per e-waste Rules)
1.
product and its operator’s manual, it means the product is covered
by the e-waste Management and Handling Rules , 2011 and are
meant to be recycled, dismantled, refurbished or disposed off.
2. Dos
a. The product is required to be handed over only to the authorized
recycler for disposal.
b. Keep the product in isolated area, after it becomes non-
functional/un-repairable so as top revent its accidental breakage.
Don’t
a. The product should not be opened by the user himself/herself, but only by authorized
service p e rsonnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap dealer/
kabariwalah.
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product in exposed area.
3. Any disposal through unauthorized agencies/person will attract action under Environment
(Protection) Act 1986 .
4. Hazards of improper handling or accidental breakage
a.
b.
5. To locate a nearest collection centre or call for pick-up (limited area only) for disposal of
this appliance, please contact Toll Free No.1800-180-9999 for details. All collection
centre and pick up facilities are done by third parties with LG Electronics India Pvt. Ltd.
merely as a facilitator.
For more detailed information , please visit : http://www.lge.com/in
When this crossed out wheeled bin symbol is depicted on the
If batteries are disposed incorrectly, it can greatly harm the environment. The chemical
by-products are hazardousT. he metals and chemicals found in batteries can mix into
soil which may be hazardous to humans, plants and animals. If thrown in fire, they can
cause blast and release toxic gases which may be harmful for health.
The refrigerant (R-22) used can be combustible at low pressure. The potential health
effects of over exposure isd izziness, headache and heart irregularities
vius iqjkus midj.k dk fuiVku ¼bZ&vif’k"V ds vuqlkj½fu;e
1- tc bl dkVs x;s ifg;s okys fcu dk fpº+u fdlh midj.k vkSj blds vksisjVj dh
iqfLrdk ds lkFk layXu gksrk gSa rks bldk eryc gS fd bls "bZ&vif'k"V" ¼izca/ku
vkSj gFkkyu½ fu;e 2011 ds vUrxZr lfEefyr fd;k x;k gS] vkSj bls
uohuhdj.k] fo?kVu vkSj fuiVku ds fy, cuk;k x;k gSA
2- djsa&
d& midj.k dks flQZ vf/kd`r iqu% uohuhdj.kdrkZ dks gh fuiVkj.k djus gsrq
gLrkarfjr djsaA
[k& tc midj.k dk;Zjr u gks bls vyx {ks= esa j[kas rkfd midj.k ls gksus okyh
nq?kZVukvks ls cpk tk ldsA
uk djsa&
d& bl midj.k dks Lo;a/[kqn ugha [kksyuk pkfg, midj.k dks dsoy vf/kd`r vf/kdkjh ds }kjk gh
!
[kksyk tkuk pkfg,A
[k&bl midj.k dks iqu% fcØh ds fy, fdlh Hkh dckM+hokyk@Hkaxkj okyk@vukf/kd`r laLFkk dks u nsaA
x& bl midj.k dks fdlh ?kjsyw vif'k"V lkeku ds lkFk feykdj u j[ksaA
?k& midj.k ds cnys gq, ;k vkrafjd iqjtks dks [kqys {ks= esa u j[ksaA
3- ;fn fdlh vukf/kd`r foHkkx ;k O;fDr ds }kjk fuiVkj.k fd;k tkrk gS rks ;g i;kZoj.k ¼lqj{kk½ /kkjk
1986 ds vUrxZr vkrk gSA
4- nq?kZVukxzLr VwV@QwV rFkk vO;ofLFkr j[k&j[kko ls cps A
d& ;fn cSVfj;ksa dk fuiVkj.k v'kq) :i ls dj jgs gaS] rks ;g okrkoj.k dks cgqr uqdlku igqqWpk ldrk
gSaA jklk;fud midj.k [krjukd gksrs gaSA tks jlk;u vkSj /kkrq cSVfj;ksa esa ik, tkrs gaS] bls feV~Vh esa
feykus ij ;g euq";ksa] ikS/kksa vkSj i'kqvksa ds fy, [krjukd gks ldrh gaSA ;fn bls vkx esa Qsadrs gaS rks ;s
foLQksV dj ldrh gaS vkSj ;s tgjhyh xSlsa ns ldrk gS tks LokLF; ds fy, gkfudkjd gaSA
[k& jsÝhtjsaV ¼R-22½ de ncko ij ngu'khy gks ldrh gaS rFkk blls LokLF; ij nqLizHkko iM+ ldrk gS
tSls pDdj vkuk] flj nnZ vkSj g`n; xfr :dukA
5- mijksDr inkFkksZ ds fuiVkju ds fy, utnhdh fuiVkju laLFkku ¼ladh.kZ {ks=½ esa dkWy djsaA vf/kd
tkudkjh ds fy, gekjs Vksy Ýh uEcj 1800-180-9999 ij dkWy djsaA lHkh laxzg.k dsUnz o fid&vi
dh lqfo/kk,a FkMZ&ikVhZ ls tks "LG Electronics India Pvt. Ltd" dks viuh lsok,a iznku dj jgh gksa]
ls djok,aA
vf/kd tkudkjh ds fy, ns[ksa osclkbV % http://www.lge.com/in
P/No.: MFL37725125
LG Electronics India Pvt. Ltd.
Registered Office: A - 27, Mohan Cooperative Industrial Estate, Mathura Road, New Delhi-110044
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

LG LWA2CR2F Owner's manual

LG
Brand
LG
Model
LWA2CR2F
Category
Mobile air conditioners
Type
Owner's manual
This manual is also suitable for

LG LWA2CR2F1 is a window-type air conditioner with a range of features to keep you cool and comfortable during the summer months. With its powerful cooling capabilities, it can quickly lower the temperature of a room, providing instant relief from the heat. The adjustable fan speed allows you to customize the airflow to your liking, ensuring optimal comfort. Additionally, the automatic swing feature ensures that the cool air is evenly distributed throughout the room, preventing hot spots.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents