2. TERK Technologies
  3. Terk Splitter
Terk Splitter

TERK Technologies Terk Splitter User manual

  • Hello! I am an AI chatbot trained to assist you with the TERK Technologies Terk Splitter User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TERK TECHNOLOGIES CORPORATION 63 MALL DRIVE, COMMACK, NY 11725 TEL: 800.942.8375 FAX: 516.543.8088 www.terk.com
©2000 TERK TECHNOLOGIES CORP. TK1073-12/00
SPLITTERS
MODELS: BSP-2. BSP-3, BSP-4
BSP-3
Frequency Range: 54-806MHz
Impedance: 75ohm matching
Insertion Loss: <7.0dB
Return Loss: >15dB
Maximum throughput: 800mA
BSP-4
Frequency Range: 54-806MHz
Impedance: 75ohm matching
Insertion Loss: <7.8dB
Return Loss: >15dB
Maximum throughput: 800mA
BSP-2
Frequency Range: 54-806MHz
Impedance: 75ohm matching
Insertion Loss: <4.0dB
Return Loss: >15dB
Maximum throughput: 800mA
Available in Three Models
TERK splitters are available in 2-way, 3-way and
4-way models to accommodate a wide variety of
TV installation needs.
At TERK Technologies we strive to offer the highest quality products to our consumers.
The specifications are subject to change without notice.
Technical Information:
SPLITTERS
High Performance
Splitters for Multiple
Signal Feeds
Simple to connect and
use, TERK splitters are
designed for maximum sig-
nal transfer and correct 75
ohm impedance, to deliver
the best-possible reception
to every TV in the home.
Each TERK splitter features
a DC Pass port, allowing
them to be used with
amplified antennas that
require DC power via coax
cable connection.
TERK splitters are essential
components for multiple TV
installations. A TERK splitter
accepts the signal from an
off-air antenna or cable TV
feed and separates the sig-
nal to send multiple feeds to
two, three or four TVs,
depending on the model.
/