TERK Technologies Terk Splitter User manual

Terk Splitter
TERK Technologies
Brand
TERK Technologies
Model
Terk Splitter
Type
User manual
TERK TECHNOLOGIES CORPORATION 63 MALL DRIVE, COMMACK, NY 11725 TEL: 800.942.8375 FAX: 516.543.8088 www.terk.com
©2000 TERK TECHNOLOGIES CORP. TK1073-12/00
SPLITTERS
MODELS: BSP-2. BSP-3, BSP-4
BSP-3
Frequency Range: 54-806MHz
Impedance: 75ohm matching
Insertion Loss: <7.0dB
Return Loss: >15dB
Maximum throughput: 800mA
BSP-4
Frequency Range: 54-806MHz
Impedance: 75ohm matching
Insertion Loss: <7.8dB
Return Loss: >15dB
Maximum throughput: 800mA
BSP-2
Frequency Range: 54-806MHz
Impedance: 75ohm matching
Insertion Loss: <4.0dB
Return Loss: >15dB
Maximum throughput: 800mA
Available in Three Models
TERK splitters are available in 2-way, 3-way and
4-way models to accommodate a wide variety of
TV installation needs.
At TERK Technologies we strive to offer the highest quality products to our consumers.
The specifications are subject to change without notice.
Technical Information:
SPLITTERS
High Performance
Splitters for Multiple
Signal Feeds
Simple to connect and
use, TERK splitters are
designed for maximum sig-
nal transfer and correct 75
ohm impedance, to deliver
the best-possible reception
to every TV in the home.
Each TERK splitter features
a DC Pass port, allowing
them to be used with
amplified antennas that
require DC power via coax
cable connection.
TERK splitters are essential
components for multiple TV
installations. A TERK splitter
accepts the signal from an
off-air antenna or cable TV
feed and separates the sig-
nal to send multiple feeds to
two, three or four TVs,
depending on the model.
  • Page 1 1
  • Page 2 2

TERK Technologies Terk Splitter User manual

Terk Splitter
TERK Technologies
Brand
TERK Technologies
Model
Terk Splitter
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents