Pulsar AWO003
is a metal casing designed as components in intruder alarms, access control systems, security systems, and others. It is intended for installation of control panels, access control controllers, radio or GSM transmitters, and other dedicated devices, components, etc.
The casing is to be installed by a qualified installer, holding the relevant certificates, required and necessary for connecting (interfering with) the 230 V AC systems and low-voltage installations.
The casing is intended for indoor installation, where the air humidity is normal (RH=90% max. without condensation) and temperature in the range of -10°C to +40°C.
Pulsar AWO003
is a metal casing designed as components in intruder alarms, access control systems, security systems, and others. It is intended for installation of control panels, access control controllers, radio or GSM transmitters, and other dedicated devices, components, etc.
The casing is to be installed by a qualified installer, holding the relevant certificates, required and necessary for connecting (interfering with) the 230 V AC systems and low-voltage installations.
The casing is intended for indoor installation, where the air humidity is normal (RH=90% max. without condensation) and temperature in the range of -10°C to +40°C.
Pulsar AWO003
is a metal casing designed as components in intruder alarms, access control systems, security systems, and others. It is intended for installation of control panels, access control controllers, radio or GSM transmitters, and other dedicated devices, components, etc.
The casing is to be installed by a qualified installer, holding the relevant certificates, required and necessary for connecting (interfering with) the 230 V AC systems and low-voltage installations.
The casing is intended for indoor installation, where the air humidity is normal (RH=90% max. without condensation) and temperature in the range of -10°C to +40°C.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI