August 2020
First Printing
Litho in U.S.A.
ML3J 19G217 AA
WARRANTY INFORMATION
Your vehicle comes with a New Vehicle Limited Warranty. The
express warranties of the New Vehicle Limited Warranty are
in substitution for and exclude all other liabilities of any kind
whether arising under statute, in tort, by implication of law or
otherwise including, to the full extent as may be allowed by law,
liability for any other representations respecting the vehicle,
statutory warranties or implied warranties or conditions as to its
merchantability or fitness.
Download a FREE electronic copy or order one FREE printed copy
of the most up-to-date Warranty Guide by visiting the Owner
Manuals section of owner.ford.com. (United States)
For Canada, visit ford.ca/warranty.
For Fleet, Limo/Livery/Hearse vehicles:
View and download your Warranty Guide by visiting the Warranty
Information section of the Fleet website, fleet.ford.com/limo.
(United States only)
ford.ca
owner.ford.com
United States
Ford Customer
Relationship Center
1-800-392-3673 (FORD)
(TDD for the hearing impaired:
1-800-232-5952)
owner.ford.com
@FordService
Canada
Ford Customer
Relationship Centre
1-800-565-3673 (FORD)
(TDD for the hearing impaired:
1-888-658-6805)
ford.ca
@FordServiceCA
Scan the country-appropriate QR code with your smartphone (make sure you have a scanner app installed) and you can
access even more information about your vehicle.
This Quick Reference Guide is not intended to replace your vehicle Owner’s
Manual, which contains more detailed information concerning the features
of your vehicle, as well as important safety warnings designed to help
reduce the risk of injury to you and your passengers. Please read your
entire Owner’s Manual carefully as you begin learning about your new
vehicle and refer to the appropriate chapters when questions arise. All
information contained in this Quick Reference Guide was accurate at the
time of duplication. We reserve the right to change features, operation and/
or functionality of any vehicle specification at any time. Your Ford dealer
is the best source for the most current information. For detailed operating
and safety information, please consult your Owner’s Manual.
LEARN MORE ABOUT YOUR NEW VEHICLELEARN MORE ABOUT YOUR NEW VEHICLE
THE ALL NEW 2021
F-150
QUICK REFERENCE GUIDE
ROADSIDE ASSISTANCE
FLAT TIRES
It does seem that today nobody gets a flat
tire, but what if you did? Roadside Assistance
will change your tire for you. Tire change
service requires the customer to have a
usable spare tire.
DEAD BATTERIES
Sure, even a good battery can go dead for
one reason or another. Roadside Assistance
will give your vehicle the jump-start it needs.
LOCK OUTS
It’s embarrassing, but it happens. We’ll
get you back in, fast... and it’s free. Key
replacement cost is the customer’s
responsibility.
TOWING
Your car’s not working... and you don’t know
why. Just make the call and we’ll be there.
Warranty Towing, Non-warranty Towing and
Collision Towing are available.
FUEL DELIVERY
You ran out of gas with no fuel station in
sight. We’ll bring the gas to you FREE. Limited
to two, no-charge occurrences within a
12-month period. For the amount provided,
please see your Owner’s Manual.
TRAILERS
If your vehicle requires towing while hauling a
trailer, Roadside Assistance provides coverage
for towing up to a maximum per event. Please
see your Owner’s Manual for details.
WINCH OUT
If you should get stuck, we’ll pull you out
(limited to events occurring within 100 feet
(30 m) of a paved/county-maintained
surface). Does not include winch out from
standing water (recoveries).
Ford Motor Company reserves the right to modify or discontinue
Roadside Assistance at any time. Certain restrictions apply to
Roadside Assistance benefits.
For further details, call
1-800-241-3673 (United States)
1-800-665-2006 (Canada)
U.S. ROADSIDE ASSISTANCE
FOR COMPLIMENTARY HELP CALL 1-800-241-3673
Quick access to the information below will get help to you
faster. Know your vehicle’s mileage and specific location.
Roadside Assistance services are available from the
warranty start date and last for 5 years or 60,000 miles,
whichever comes first.
NAME
KEY CODE# VIN
See Warranty Guide for complete details.
Download the Sykes4Ford Roadside Assistance App for
access to your roadside assistance services.
CANADA ROADSIDE ASSISTANCE
NAME
KEY CODE# VIN
4 – 9 INSTRUMENT PANEL
10 – 12 INFORMATION AND
ENTERTAINMENT
DISPLAY
13 HYBRID VEHICLE
INFORMATION
14 – 15 COMFORT
16 CONVENIENCE
17 – 24 FUNCTION
25 DIESEL INFORMATION
26 – 27 ESSENTIAL INFORMATION
TABLE OF CONTENTS
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device
that may take your focus o the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device
while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may aect the use of
electronic devices while driving.
VOICE INTERACTION
Voice Interaction allows you to control vehicle features using conversational requests.
General Examples
• • Start Over.
• • Cancel.
• • Help.
Entertainment Examples
• • Play The Beatles.
• • Show music by The Beatles.
• • Set the station to 101.9 FM.
Climate Examples
• • I am cold.
• • Set the temperature to 65 degrees.
Phone Examples
• • Call Henry.
• • Dial (phone number).
• • Send a text message to Henry.
• • Read my message from Henry.
App Examples
• • Mobile Apps.
• • List Mobile Apps.
• • Find Mobile Apps.
Navigation Examples
• • Drive to 1 American Road in
Dearborn, Michigan.
• • Show me directions to the Golden
Gate Bridge.
• • Show me directions to Oakwood Boulevard
and Pellham Road.
• • Cancel route.
Some services may not be available in your area. Refer to your Owner’s Manual in the head unit, visit the website or call the toll-free number.
FOR U.S. CUSTOMERS: FOR CANADIAN CUSTOMERS:
Visit owner.ford.com or call 1-800-392-3673. Visit syncmyride.ca or syncmaroute.ca or call 1-800-565-3673.
TO BEGIN A VOICE INTERACTION, YOU CAN EITHER:
• Press the voice interaction button on the steering wheel.
• Say the selected wake word.
ONCE YOU HAVE STARTED A VOICE INTERACTION, YOU CAN SPEAK TO THE SYSTEM IN A CONVERSATIONAL MANNER. SOME
EXAMPLES INCLUDE:
For more information about using voice interaction and for troubleshooting information, please see the Owner's Manual in your vehicle's head unit.
2
SPOT LAMPS*
With the lighting control switch in the parking
lamps position, press the buttons located
near the lighting control switch to activate the
le-hand or right-hand side spot lamps. Once
switched on, the spot lamps light the area in front
of and to the side of your vehicle. Adjust the aim
of the spot lamps by moving the exterior
mirrors' positions.
3
EXTERNAL LAMPS
Parking lamps on.
Autolamps on. Autolamps turn the
headlamps on in low light situations
or when the wipers operate.
Headlamps on.
Fog lamps on. Press the control to
switch the fog lamps on or o. When
the lighting control is in the autolamps
position, you cannot switch the fog
lamps on unless the headlamps are on.
Note: The lighting control defaults to autolamps
every time you switch your vehicle on.
4
ELECTRIC PARKING BRAKE
The switch is on the le-hand side of the steering
wheel, on the lower part of the instrument panel.
To apply the electric parking brake, make sure the
transmission is locked into park (P), and then pull
the switch up.
To release the electric parking brake, switch
the ignition on, press the brake pedal, and then
manually press the switch down. The brake
system warning lamp then turns o to confirm the
parking brake is released.
5
ADJUSTING THE PEDALS*
The control is on the le side of the steering column.
Press the le arrow to move the pedals away
from you.
Press the right arrow to move the pedals closer
to you.
Adjust the pedals only aer stopping your vehicle
and placing it in park (P).
6
INFORMATION CLUSTER
DISPLAY CONTROLS
Monitor and control important vehicle information
and features through the instrument cluster display.
Press to go back or to exit
a menu.
Press to make a selection.
Press the up and down arrows to scroll
through menu items.
Press to display the submenus.
Refer to the Instrument Cluster Displays chapter in
your Owner’s Manual for more details.
7
ADAPTIVE CRUISE CONTROL
Adaptive Cruise Control adjusts your speed to
maintain a set distance between your vehicle
and the vehicle in front of you in the same lane.
You can select from one of four gap settings by
pressing the gap controls on the steering wheel.
Press the button to activate the system.
Accelerate to the desired speed and press the
SET+ or SET – button to set the current speed.
An indicator light, the current gap setting and
your set speed appear in the information display.
Press to cancel cruise control. The set speed
does not erase. The system can also bring your
vehicle to a complete stop and may resume going
forward in stop-and-go trac.
Lane Centering is designed to help keep your
vehicle in the center of the lane by applying
continuous assistance steering torque input
toward the lane center on highways. Lane
Centering must be enabled in your touchscreen.
To switch it on, press the button.
Note: Driving aids do not replace the need to
watch where the vehicle is moving and brake
when necessary.
Refer to the Adaptive Cruise Control chapter in
your Owner’s Manual for safety information, more
details and limitations.
8
POWER ADJUSTABLE
STEERING COLUMN*
Use the control on the side of the steering
column to adjust the position.
To tilt: Press the top or bottom of the control.
To telescope: Press the front or rear of the control.
*if equipped
5
4
1
POWER TELESCOPING,
EXTERIOR MIRRORS*
To telescope both mirrors at the
same time, make sure you switch
your vehicle on (with the ignition
in accessory mode or the engine
running) and then:
1. Press and release the
button.
2. Press the adjustment control to
position the mirrors.
• • Press the le arrow to
extend the mirrors out. Press
the right arrow to retract
the mirrors in.
Note: Moving the mirrors 10 or more
times within one minute, or repeated
folding and unfolding of the mirrors
while holding the control down during
full travel, may disable the system to
protect the motors from overheating.
Wait approximately three minutes
with the vehicle running, and up to 10
minutes with the vehicle o, for the
system to reset and for function to
return to normal.
1
2
3 7 6
8
5
4
F-150 INSTRUMENT PANEL
INSTRUMENT PANEL
F-150 INSTRUMENT PANEL
9
PUSH BUTTON
IGNITION SWITCH*
You can start your vehicle by pressing
the START STOP button while fully
pressing down on the brake pedal. Press
the button again, without applying the
brake, to switch the engine o. If you
leave your vehicle idling for an extended
period of time, the engine shuts down
automatically. Before this happens, a
message appears in the information
display, allowing you time to override the
shutdown feature.
Note: A valid key must be inside the vehicle
for the ignition to start.
10
FOUR-WHEEL DRIVE*
The four-wheel drive system is designed
to continuously monitor and adjust
power delivery to the front and rear
wheels to optimize traction. The system
is designed to control and prevent
wheel slip.
Four-Wheel Drive Auto*: Four-Wheel
Drive Auto provides traction to the
vehicle by transferring power to the front
or rear wheels of the vehicle depending
on road conditions. This is an active
system that continuously will make
changes depending on available traction
and selected drive mode.
*if equipped
INSTRUMENT PANEL
Four-Wheel Drive High: Four-wheel drive high
gear mode provides power to both the front
and rear wheels for use in o-road or winter
conditions, such as deep snow, sand or mud.
Four-Wheel Drive Low: Four-wheel drive low
gear mode provides power to both the front
and rear wheels for use on low traction surfaces.
Intended only for o-road applications such as
deep sand, steep grades or pulling heavy objects.
ELECTRONIC LOCKING DIFFERENTIAL*
The electronic locking dierential allows both
rear wheels to turn at the same speed to provide
additional traction in mud, rocks, sand or other
o-road conditions.
Note: Do not use this feature on dry pavement or
hard-surfaced roads.
To activate the electronic locking dierential,
press the button.
The indicator light continuously displays in the
instrument cluster when the electronic locking
dierential is active.
11
OWNER MANUAL
Select Features on the touchscreen and select
the owner manual icon to view your owner
manual on the touchscreen.
12
TRAILER REVERSING AID*
Pro Trailer Backup Assist with Trailer Reverse
Guidance* assists you in backing up your trailer.
Using the vehicle’s screens and cameras, the
system gives you unique views and guidance as
you maneuver your trailer.
Note: Some features associated with this system do
not work until you set it up.
See the Pro Trailer Backup Assistance with Trailer
Reverse Guidance Quick Start Guide in your
Owner’s Manual portfolio for the complete setup
and operation details.
13
INTEGRATED TRAILER
BRAKE CONTROLLER
When used properly, the trailer brake controller
assists in smooth and eective trailer braking by
powering the trailer’s electric or electric-over-
hydraulic brakes with a proportional output based
on the towing vehicle’s brake pressure.
The Gain setting is used to set the trailer brake
controller for specific towing conditions and
should be changed as towing conditions change.
Changes to towing conditions include trailer load,
vehicle load, road conditions and weather.
Adjusting the Gain:
1. Press the + or – buttons to increase or
decrease the setting to the desired starting
point. For example, a gain setting of 6.0 is a
good starting point for heavier loads.
2. Test the adjusted gain setting again aer you
make adjustments.
When testing:
A. In a trac-free environment, tow the
trailer on a dry, level surface at a speed of
20-25 mph (30-40 km/h) and squeeze the
manual control lever completely.
B. If the trailer wheels lock up (the tires will
squeal), reduce the gain setting. If the
trailer wheels turn freely, increase the
gain setting.
C. The proper gain setting will be at the point
just below trailer wheel lock-up.
Note: If towing a heavier trailer, trailer wheel lock-up
may not be attainable even with the maximum gain
setting of 10.
11
7
6
9
10
12
13
16
HAZARD WARNING
FLASHER CONTROL
17
HILL DESCENT CONTROL*
The feature helps you set and maintain vehicle
speed while descending steep grades on various
surface conditions. This feature can maintain
vehicle speeds on downhill slopes between 2–20
mph (3–32 km/h). Above 20 mph (32 km/h), the
system remains on but the descent speed cannot
be set or maintained.
To switch this feature on and set the descent
speed, do the following:
1. Press and release the hill descent button
located on the instrument panel. A light
in the button turns on and a tone sounds.
2. To increase descent speed, press the + button
on the steering wheel or the accelerator pedal
until you reach the desired speed. To decrease
descent speed, press the — button on the
steering wheel or the brake pedal until you
reach the desired speed.
For more detailed information, please refer to
your Owner’s Manual.
18
12 V POWER OUTLET
The power outlet, located on the instrument
panel or the rear of the center console, can power
devices that require up to the rating on the outlet
cover. For additional information, please see the
Power Outlet chapter of your Owner's Manual.
19
120 V POWER OUTLET
The power outlet, located on the instrument
panel or the rear of the center console, can power
devices that require up to the rating on the outlet
cover. The power point indicator illuminates to let
you know the status of the system. For additional
information, please see the Power Outlet chapter
of your Owner's Manual.
20
DRIVE MODE CONTROL
Your vehicle has various drive modes that you can
select for dierent driving conditions. Depending
on the drive mode that you select, the system
adjusts various vehicle settings, for example
steering, gear shiing, handling, driveline state and
powertrain response.
The system tailors your vehicle configuration for
each mode you select.
Rotate the drive mode dial on the center console
to select or change a drive mode.
Sport
For sporty driving with improved
performance handling and response.
Eco
For ecient driving.
Tow/Haul
For improved transmission operation
when towing a trailer.
Normal
For everyday driving.
Slippery
For less than ideal road conditions,
such as snow or ice-covered roads.
Deep Snow/Sand*
For snow or so, dry sand.
Mud/Ruts*
For driving through mud and ruts.
Trail
For muddy, rutted, so or
uneven terrain.
Rock Crawl*
For optimum rock-climbing ability.
For more information on drive control,
please refer to the Driving Aids chapter in
your Owner's Manual.
F-150 INSTRUMENT PANEL
INSTRUMENT PANEL
9
8
*if equipped
17
1614 15
19
20
14
AUTO-START-STOP*
The system helps reduce fuel
consumption by automatically
shutting o and restarting the
engine while at a stop. The engine
will restart automatically when you
release the brake pedal.
To switch this feature o, press the
Auto-Start-Stop button on the
center console. OFF illuminates in
the switch.
See the Auto-Start-Stop chapter
in your Owner's Manual for
more details.
15
360 DEGREE CAMERA*
The system consists of front, side
and rear cameras. Press to
access the dierent camera views.
• What is directly in front of or
behind your vehicle.
• Cross trac view in front of and
behind your vehicle.
• Allows you to see a top-down view
of the area outside your vehicle,
including the blind spots.
• Helps you when parallel parking
and centering in a parking space.
Refer to the 360 Degree Camera
chapter in your Owner’s Manual for
more information.
18
F-150 INFORMATION AND ENTERTAINMENT DISPLAY
11
10
INFORMATION AND
ENTERTAINMENT DISPLAY
PHONE MENU
To make calls, select from your contacts, recent calls or dial the number
on the phone keypad. From the phone menu, you can also adjust phone
settings, change devices or place your device in Do Not Disturb mode. The
Do Not Disturb mode rejects all incoming calls and switches o ring tones
and alerts.
If your phone has a voice service such as Siri, you may also see a button to
access this feature in the phone menu.
RECEIVING CALLS
To accept the call, select Accept on the touchscreen or press the phone
button on the steering wheel.
To reject the call, select Reject on the touchscreen.
DURING A PHONE CALL
When you take a phone call, the screen displays the contact's name and
number, the call duration and the phone signal strength and battery. You
can also select End Call, Keypad, Mute or Privacy during the call. Selecting
privacy transfers the call to your cell phone.
TEXT MESSAGES
The system can receive and notify you of text messages. You can use the
touchscreen to select to hear or see the text messages, call the sender or
reply to the text message. You can switch text message notifications on and
o in Settings menu. For more information, please see the Phone chapter of
your Owner's Manual.
APPS
The first time you start an app through the system, you could be asked to
grant certain permissions. Some apps will work with no setup. Others require
you to configure some personal settings before you can use them. To access
the apps, select the apps option on the feature bar.
APPLE CARPLAY
®
AND ANDROID AUTO™
To use Apple CarPlay and Android Auto, pair your device and follow the
instructions on the touchscreen. Certain system features are not available
when you are using Apple CarPlay or Android Auto.
Android Auto may need to be enabled from the settings menu. You can
switch Apple CarPlay or Android Auto o through the settings menu. See the
Apps chapter of your Owner’s Manual for more information.
INFORMATION ON DEMAND SCREEN*
You can use the following controls to navigate the Information on
Demand screen:
Press the button to view the next Information on Demand screen.
Press the button to view the previous Information on
Demand screen.
Press the button to view the Information on Demand screen
card view.
The feature and status bar on your touchscreen allow you to interact with
a variety of vehicle features. You can also utilize voice commands to access
these features.
SPEED-RESTRICTED FEATURES
For your safety, some functions of the system are speed dependent.
Some features of this system may be too dicult to use when your vehicle
is moving so they are restricted from use unless your vehicle is stationary.
Other features are limited to when your vehicle is traveling at speeds under
3 mph (5 km/h).
PAIRING YOUR PHONE FOR THE FIRST TIME
Switch on Bluetooth on your device to begin pairing. Check the
compatibility of your device on the local Ford website.
To add a phone:
1. Select the phone option on the feature bar.
2. Select Add Phone.
3. A prompt alerts you to search for the system on your phone.
4. Select your vehicle on your phone.
5. Confirm that the six-digit number appearing on your phone matches
the six-digit number on the touchscreen.
6. The touchscreen indicates when the pairing is successful.
7. Download the phonebook from your phone when you are prompted.
To pair subsequent phones, please see the Information and Entertainment
Display chapter in your Owner’s Manual.
*if equipped
HYBRID VEHICLE INFORMATIONINFORMATION AND ENTERTAINMENT DISPLAY
13
12
A hybrid vehicle has an electric motor and a high voltage battery
combined with a gasoline engine. The hybrid vehicle combines
electric and gasoline propulsion to provide optimal performance
and improved eciency. The gasoline engine starts and stops to
provide power when required.
*if equipped
REFUELING A HYBRID VEHICLE
Press the button on the le side of the instrument panel next to the
headlamp switch to open the fuel filler door. The fuel filler door can take up to 15
seconds to open before you can insert a fuel filler nozzle.
STARTING A HYBRID VEHICLE
Before starting your vehicle, check that the headlamps and electrical
accessories are o. Make sure the parking brake is on and the transmission is in
park (P). Do not touch the accelerator pedal. Fully press the brake pedal, then
press the push button ignition switch or turn the key. The green ready indicator
illuminates letting you know that your vehicle is ready for driving. Since your
vehicle is equipped with a silent key start, the engine may not start when your
vehicle starts.
HYBRID DISPLAY INFORMATION
Hybrid vehicles display unique information, such as brake coach and trip
summary. Aer you stop your vehicle, brake coach indicates how to brake in a
manner that maximizes the amount of energy returned through the regenerative
braking system. You can switch brake coach on or o in the settings menu.
Hybrid vehicles display the trip summary when you shut o your vehicle.
HIGH VOLTAGE BATTERY
The high voltage battery is a technologically advanced lithium ion battery pack,
used to store electrified propulsion energy to power the vehicle.
CONNECTED VEHICLE
The modem* or connectivity device* enables access to a range of
features built into your vehicle. More information is available through
the FordPass App.
The modem and connectivity device have a SIM. The modem was
enabled when your vehicle was built and periodically sends
messages to stay connected to the cell phone network, receive
automatic soware updates and send vehicle-related information
to us, for example, diagnostic information. The connectivity device
periodically sends messages to stay connected to the cell phone
network. These messages from the modem or connectivity device
could include information that identifies your vehicle, the SIM and
the electronic serial number of the modem or connectivity device.
Cell phone network service providers could have access to additional
information, for example, cell phone network tower identification.
For additional information about our privacy policy, visit
www.FordConnected.com or refer to your local Ford website.
NAVIGATION
You can set your destination using the text entry or map screen.
Using text entry, you can enter your destination using the
keyboard. Press Search and select the destination from the list on
the screen. Press Start to begin navigation.
Using the map screen, you can press and hold a location on the
map to place a pin. Press the to begin the route guidance.
Through the menu button, you can change the format of the map,
switch live trac on and o, update the map and navigate to a
recent destination or saved destination.
During route guidance, you can adjust the guidance prompt volume by
turning the volume control when a guidance prompt plays. To repeat an
instruction, press the turn indicator. To cancel route guidance, press the
button.
F-150 COMFORT
15
14
COMFORT
HEATED AND VENTILATED FRONT SEATS*
To operate the heated feature, press repeatedly to cycle through the
various settings and o.
To operate the ventilated feature, press repeatedly to cycle through the
various settings and o. The ventilated seats will function only when the
engine is running.
Note: More lights indicate higher settings.
PERSONAL PROFILES
You can create multiple personal profiles for each driver to personalize
the vehicle’s settings. You can create one profile for each preset memory
seat button along with a guest profile. A profile can be recalled using
the touchscreen, the selected preset button, a linked remote control or
mobile device.
Use the touchscreen to create a personal profile.
1. Switch the ignition on and leave the vehicle in park (P).
2. Select the Personal Profiles button under Settings and follow the
instructions provided on the screen.
You can save preset memory positions for up to three remote controls by
assigning a remote control to a personal profile using the touchscreen. You
can assign three additional remote controls set up as Phone As A Key.
MEMORY FUNCTION*
The memory function allows a one-touch recall of personalized memory
features, including the driver seat, power mirrors, adjustable pedals and
power steering column. Use the memory controls on the driver door to
program and then recall memory positions. To program a position, switch
the ignition on. Adjust the memory features to your desired positions.
Press and hold the desired preset button until you hear a single tone. A
confirmation message appears in the information display. You can now use
these controls to recall the set memory positions. You can also program
your memory seat to your transmitter. That way, when you unlock your door
with the transmitter, your memory features automatically move into your
saved positions.
See the Seats chapter in your Owner’s Manual for
more details.
MOONROOF*
The moonroof controls are on the overhead console and have a one-touch
open and close feature. To stop its movement during one-touch operation,
press the control a second time.
Press and release to open the moonroof. The moonroof stops short of
the fully opened position.
To open the moonroof fully, press and release the control again.
VENT
Press and release to close the moonroof.
VENT
With the moonroof in the closed position, press and release to vent
the moonroof. To close the moonroof from the vent position, press and
release the switch again.
Press and release to open the sunshade. The sunshade stops short of
its fully opened position for the comfort of rear passengers. To open
the sunshade fully, press the control again.
Press and release to close the sunshade.
TILTING HEAD RESTRAINT
You may also be able to tilt the head restraint forward or backward for
additional comfort. Pivot the head restraint forward to the desired location.
Aer the head restraint reaches the forward-most tilt position, pivot it
forward again to return it to its standard position.
Note: Aer tilting the head restraint, do not attempt to force the head
restraint backward.
EASY ENTRY AND EXIT*
Moves the driver seat rearward up to 2 inches (5 centimeters). Additionally,
the power tilt and telescoping steering wheel moves to the full up position
when the transmission is in park (P) and you switch o the keyless start
ignition. The driver seat and steering column return to their previous
positions when you push the keyless start ignition button.
Note: You must have your intelligent access key with you for these
features to work.
MASSAGE SEATS*
Using the button mounted on the outside of the front seats or through the
touchscreen, you and a front-seat passenger can adjust the massage and
support settings. You can also control the intensity of the massage, increase
or decrease the lumbar bolster and cushion support and adjust the height
of the bolster.
Refer to the Massage Seats section in the Front Seats chapter in your
Owner's Manual for more details.
ADJUSTING THE FRONT SEAT FLAT*
You can use the recline control to move the
front seats into a flat position. Before doing
so, make sure the rear seat cushion is in the
upright position and remove any objects that
may obstruct the movement of the flat seat.
*if equipped
17
16
CONVENIENCE
*if equipped
EXTERIOR ZONE LIGHTING*
You can illuminate the exterior of your truck by selecting from up to four
exterior zone lighting areas. To use exterior zone lighting, select Features on
the touchscreen, then select Zone Lighting. Press the button to switch
on or o the zone lighting. Press All Zones to switch on all of the exterior
lighting zones. Use the touchscreen to switch on or o individual zones.
PICKUP BED POWER OUTLET*
The vehicle functions as a portable generator and can power devices that
require up to the rating listed on the power outlet label. If your vehicle is
equipped with a Pickup Bed Power Outlet, it will be located behind a cover
on the le side of the bed. Switch this outlet on by pressing the switch
on the instrument panel or touchscreen. Open the outlet cover by moving
the panel upward. The outlet turns on aer a few seconds and the
indicator illuminates. See your Owner's Manual for more details about
using this feature.
ACTIVE DRIVE ASSIST*
Active drive assist works with adaptive cruise control to keep your
vehicle centered in your lane. Active drive assist must be enabled in your
information and entertainment screen.
The system monitors your eyes and head position to detect if you are
distracted. If the system determines you are distracted, it alerts you to turn
your eyes back to the road.
The system only activates when active drive assist is enabled in your
touchscreen, adaptive cruise control with stop and go is on, the system
detects both lane markings, your hands are on the steering wheel and your
eyes are on the road.
When the system is on, the color of the indicator changes to indicate the
system status.
- Gray: the system is on but inactive.
- Green: the system is active and applying continuous assistance
steering support toward the lane center when your hands are on the
steering wheel.
- Blue: the system is active and hands-free driving support is available.
For additional system information, settings and limitations, please see your
Owner's Manual.
F-150 FUNCTION
FUNCTION
AUTO HOLD
Auto Hold can assist you while stopping at trac lights or while in trac
jams by holding the brakes when you stop the vehicle. You can switch the
system on and o by accessing the DRIVER ASSISTANCE menu on the
touchscreen. When the system is on and actively holding the vehicle, AUTO
HOLD displays in the instrument cluster. When you press the accelerator
pedal, Auto Hold automatically releases the brakes. In certain situations,
Auto Hold may apply the electric parking brake and illuminate the brake
warning lamp in the instrument cluster.
See the Auto Hold chapter of your Owner’s Manual for more details.
CENTER CONSOLE AND TAILGATE WORK SURFACE*
The interior work surface and tailgate work surface provide you with a
location to work from. Inside the vehicle, the work surface is available on the
center console or the back of the 20% center seat.
To access work surface on the center console:
1. Press the stow button to fold down the shier lever. Press the button again
to release the selector lever from the stow position to use.
2. Release the work surface using the latch by the rear console
cup holders.
To access the work surface on the back of the 20% seat:
1. Push the lever on the side of the seat.
2. Fold the seat down to access the work surface.
By pushing the latch on the side of the interior work surface, you can adjust
the location to several lockable positions. Make sure you stow the interior
work surface before driving.
The tailgate work surface on the inside portion of your tailgate can be used
to perform tasks such as writing, measuring or securing material.
To use the tailgate work surface, fold down the tailgate. The tailgate work
surface contains a tablet stand, tool inset, ruler, cup holder and clamp
pockets that allow you to secure work material.
F-150 FUNCTION
19
18
FUNCTION
LANE KEEPING SYSTEM*
When you switch the system on and the system detects an unintentional
dri out of your lane is likely to occur, the system notifies or assists you
to stay in your lane through the steering system and information display.
Depending on the feature operation mode you select, the system provides a
warning by vibrating the steering wheel (Alert Mode), steering assistance by
gently counter steering your vehicle back into the lane (Aid Mode), or both
(Aid+Alert Mode). You can switch the system on or o by pressing the
button on the steering wheel.
Refer to the Lane Keeping System chapter of your Owner's Manual for
system operation and limitations.
UPDATING THE VEHICLE SYSTEMS WIRELESSLY
You can update your vehicle system wirelessly by making sure Vehicle
Connectivity and Automatic System Updates are switched on. When an
update is available, tap the notification icon and follow the prompts on
the screen.
To make sure you receive all updates, set a recurring schedule and connect
to Wi-Fi. Updates may take longer if not connected to Wi-Fi, or may not
download at all.
You can schedule a convenient time for the update to complete. An update
can take up to 30 minutes and cannot be canceled once it has been started.
During an update, you will not be able to drive your vehicle, start the vehicle,
charge the vehicle or use remote controls to lock and unlock the vehicle.
The alarm, central locks and door chimes are disabled. The electronic door
lock will not function during an update. You can open the doors using the
mechanical latch if child locks are not on. Pull the handle until it stops to
use the mechanical latch.
PARKING AIDS*
With the front, rear and side parking aids, a warning tone sounds if there is an
obstacle near either bumper or near the sides of your vehicle. The warning tone
increases in frequency as the object gets closer.
The front sensors are active when the gearshi is in any position other than
park (P) and traveling at a low speed; the rear sensors activate when the
vehicle is in reverse (R) and is traveling less than 3 mph (5 km/h). The side
sensor coverage is up to 24 in (60 cm) from the sides of your vehicle.
The system provides object distance indication through the information
display. As the distance to the object decreases, the indicator blocks illuminate
and move toward the vehicle icon. Visual indication remains on when the
transmission is in reverse (R).
Note: Visibility aids do not replace the need to watch where the vehicle is moving.
Refer to your Owner’s Manual for safety information, more details and
system limitations.
MYKEY™
MyKey allows you to program certain driving restrictions in order to promote
good driving habits. You can program speed restrictions, limited volume levels
and more, depending on your vehicle's level of equipment. For complete
information, refer to the MyKey chapter in your Owner’s Manual.
ACTIVE PARK ASSIST WITH PARALLEL PARKING, PERPENDICULAR
PARKING AND PARALLEL PARK OUT ASSIST*
Detects an available parking space and automatically steers the vehicle into
the space. The system then steers, accelerates, brakes and shis gear as
required to maneuver into or out of a parking space.
To use active park assist, press the button above the display screen, then
touch the Active Park Assist icon on the display screen to bring up full screen
notifications. Then press either the parking button or the so keys on the display
screen to switch between Parallel Park In, Perpendicular Park In or Parallel Park
Out parking modes.
Use the direction indicator to select from which direction you want to begin
searching, either to the le- or right-hand side of your vehicle.
To enter a parallel parking space, drive your vehicle approximately 3 (1 m)
away from and parallel to the other parked vehicles when searching for a parking
space. A tone sounds and a message appears in the information display when
active park assist finds a suitable parking space. To park, press and hold the
brake pedal, then release the steering wheel and shi into neutral (N). Press and
hold the active park assist button. Release the brake pedal to allow the vehicle
to park.
You can slow down your vehicle at any time by pressing the brake pedal. The
vehicle shis into park (P) when parking is complete.
Use the park out assist feature when your vehicle is at rest in a parallel parking
space. Press the active park assist button and select parallel park exit. Use the
direction indicator lever to choose the direction to exit the space. Press and hold
the brake pedal. Release the steering wheel and shi into neutral (N). You can
then release the parking brake and press and hold the active park assist button.
Release the brake pedal to allow the vehicle to move.
Note: Aer the system drives your vehicle to a position where you can exit the
parking space in a forward movement, a message appears instructing you to take
full control of your vehicle.
For complete information, refer to the Parking Aids chapter of your
Owner's Manual.
TRAILER SWAY CONTROL
The feature applies your vehicle's brakes at individual wheels and, if
necessary, reduces engine power. To switch this feature on or o, select
Features on the touchscreen, then press Towing. Use the selector to switch
Trailer Sway Control on or o. When you switch the ignition on, the system
automatically turns on. If the trailer begins to sway, the stability control light
flashes and a message displays. The first thing to do is slow your vehicle
down, then pull safely to the side of the road and check for proper tongue
load and trailer load distribution.
For more information, please refer to the Towing chapter in your
Owner’s Manual.
*if equipped
F-150 FUNCTION
21
20
TAILGATE STEP*
Use the step to make entering the truck bed easier. This feature includes a
step-up into the box and a handle. These items stow inside the tailgate.
To Use
1. Lower the tailgate.
2. Push the button in the center of the tailgate molding. The step pops
out slightly.
3. Pull the step out fully and lower it to the lowest position.
4. Pull the yellow handle stop toward you and out of the tailgate.
5. Rotate the handle up from a horizontal position to a vertical one until you
hear a sound, indicating that the handle locked into place.
To Close
1. Press the yellow button on the telescoping handle to lower the handle,
then press the yellow lever at the bottom of the handle to unlock the
handle. Rotate the handle down from vertical to horizontal and push it
into the tailgate.
2. Rotate the step up until it is horizontal, then push it back into the
tailgate until the step is secure.
TIE DOWN CLEATS*
These cleats attach to the inner box walls to help you to tie down cargo. Lock
the cleats to prevent removal and unlock them for removal.
You can take the cleats out to attach accessories and more. See your Owner's
Manual for complete details.
OPENING AND CLOSING THE POWER TAILGATE*
You can open the power tailgate using the remote transmitter by pressing
twice within three seconds. You can also press the button on the
instrument panel or press the button on the tailgate itself. You can press
the same button on the remote, instrument panel or tailgate to close the
tailgate. You can also use the li to close feature by liing the tailgate
approximately 4 inches (10 cm) and holding it for a few seconds. The tailgate
closes automatically.
FUNCTION
BLIND SPOT INFORMATION SYSTEM WITH TRAILER TOW AND
CROSS TRAFFIC ALERT*
BLIS aids you in detecting vehicles that
may have entered into your blind spot zone.
The cross trac alert feature warns you of
vehicles approaching from the sides when
the transmission is in reverse (R).
BLIS and cross trac alert will display a yellow indicator light in your exterior
mirrors. Cross trac alert will also sound tones and display messages to warn
you from which direction vehicles are approaching. Refer to the Driving Aids
chapter in your Owner’s Manual for more information.
When you connect a trailer to your vehicle, the trailer set up menu appears
in the touchscreen. This menu allows you to set up a new trailer or choose
from a previously set up trailer. The Blind Spot Information System with
Trailer Tow is designed to aid you in detecting vehicles that may have entered
the detection area zone. The detection area is on both sides of your vehicle
and trailer, extending rearward from the exterior mirrors to the end of
your trailer.
PRE-COLLISION ASSIST*
If your vehicle is rapidly approaching a stationary vehicle, a vehicle
traveling in the same direction as yours or a pedestrian within
your driving path, the system is designed to provide three levels
of functionality:
Distance Alert: When activated, a flashing visual warning displays and
an audible warning chime sounds.
Active Braking: Active braking may activate if the system determines
that a collision is imminent. The system may help the driver reduce impact
damage to avoid the crash completely.
Evasive Steering Assist
If your vehicle is rapidly approaching a stationary vehicle or a vehicle
traveling in the same direction as yours, the system is designed to help
you steer around the vehicle. Aer you turn the steering wheel in an
attempt to avoid a crash with the vehicle ahead, the system applies
additional steering torque to help you steer around the vehicle. Aer you
pass the vehicle, the system applies steering torque when you turn the
steering wheel to steer back into the lane. The system deactivates aer
you fully pass the vehicle.
You can use your touchscreen to adjust the collision warning system’s
sensitivity or to switch the system on or o.
HILL START ASSIST
The system makes it easier to pull away when you park your vehicle on a
slope without using the parking brake. When active, this feature allows
your vehicle to remain stationary on a slope for up to two to three seconds
aer you release the brake pedal. This short period gives you time to
move your foot to the accelerator and pull away. This feature activates
automatically if the sensors detect that the vehicle is on a slope.
POST-CRASH ALERT SYSTEM
The system provides audible and visual alarms in the event of a crash
which causes the deployment of airbags or the activation of the seatbelt
pretensioners. The direction indicators flash and the horn sounds. To
deactivate the system, press the hazard flasher control, or you can press
the unlock button on your remote transmitter.
*if equipped
F-150 FUNCTION
23
22
REMOTE CONTROL ICONS*
• • Press once to lock all doors. One short flash of the direction
indicators confirms that your vehicle has locked.
• • Press once to unlock all doors.
• • Press to start the panic alarm. Press again or switch on the ignition
to stop the alarm.
• • Car finder: Press twice within three seconds to locate your vehicle.
The horn sounds and the direction indicators flash.
REMOTE START*
Remote start allows you to start the engine from outside your vehicle using
your key.
To start, press and then press twice within three seconds. Before
driving your vehicle, you must press the push button ignition switch on the
instrument panel while applying the brake pedal. You can also turn your
vehicle o from outside aer a remote start by pressing once. If your
vehicle is equipped with remote feedback, an LED on the key provides status
feedback of remote start or stop commands. A solid green light means the
remote start or extension was successful, while a blinking red light means the
remote start or stop has failed. A solid red light means that the remote stop
was successful and the engine is o. When the system is waiting for a status
update from the vehicle, you will see a blinking green light.
DRIVER ALERT*
The system automatically monitors your driving behavior using various
inputs, including the front camera sensor.
Driver alert calculates your alertness level based on your driving behavior
in relation to the lane markings and other factors through use of the
front camera sensor behind the interior mirror. The system displays
recommendations to rest when fatigue is detected.
POWER RUNNING BOARDS*
The running boards automatically extend down and out when you open the
door. This can help you enter and exit your vehicle. Using the touchscreen,
you can select the power running board mode. Select Features, then
Running Boards, then select a setting.
You can choose:
O: The power running boards remain stowed, regardless of
door position.
Auto: The power running boards deploy when you open the door
and stow when you close the door.
Out: The power running boards remain deployed, regardless of
door position.
Approach When auto is also switched on, the running boards deploy
detection: when you approach your vehicle with a remote control. If you
select this mode, an option displays that allows you to select
how long the running boards stay deployed without opening
the door.
You can use the power running board kick switch to deploy and stow the
running board without opening or closing the door.
Note: Do not use any part of the power running boards to li your vehicle
when jacking. Always use proper jacking points. See your Owner’s Manual
for details.
FUNCTION
*if equipped
WINDSHIELD WIPERS AND WASHERS
Rotate the end of the control away from you for a short wipe interval
and toward you for a longer wipe interval.
Your vehicle may have Autowipers. Use the rotary control to adjust
the sensitivity of the autowipers. When you select low sensitivity, the
wipers operate when the sensor detects a large amount of water on the
windshield. When you select high sensitivity, the wipers operate when
the sensor detects a small amount of water on the windshield. For more
information, please see the Wipers and Washer chapter in your Owner’s
Manual. To use the washer feature, push the end of the lever.
CARGO LAMPS*
Use the control in the rear cargo box or on the lighting control to switch
the lights on and o.
PASSIVE KEY*
You can unlock and lock the vehicle without taking the key out of your
pocket or bag when your intelligent access key is within 5 feet (1.5
meter) of your vehicle. To unlock, touch the unlock sensor on the back
of the door handle for a brief period and then pull on the door handle,
being careful to not touch the lock sensor at the same time or pull the
door handle too quickly. To lock, touch the door handle lock sensor on
the door for approximately one second, being careful to not touch the
unlock sensor on the back of the door handle at the same time.
KEYLESS ENTRY KEYPAD*
The SecuriCode keypad is near the driver window and illuminates when
touched. The keypad allows you to lock or unlock the doors without a
key. You can operate the keypad with the factory set, five-digit entry code
found on the owner’s wallet card in the glove box or by using your personal
code. You must press each number within five seconds of each other.
To Unlock All Doors
Enter the factory-set code or your personal code, then press 3·4 within
five seconds.
To Lock All Doors
Press and hold 7·8 and 9·0 at the same time (with the driver door
closed). You do not need to enter the keypad code first.
See the Doors and Locks chapter in your Owner’s Manual for more
information on how to use SecuriCode.
25
24
DIESEL FUEL REQUIREMENTS*
Ford recommends that you use only the diesel fuels that meet either
the ASTM D975 diesel or the ASTM D7467 B6-B20 biodiesel industry
specifications. Outside of North America, use fuels meeting EN590 or
an equivalent local market standard.
Diesel fuel is adjusted seasonally for colder temperatures. For best results at
temperatures below 19°F (-7°C), it is recommended to use a diesel fuel that
has been seasonally adjusted for the weather. See the Fuel and Refueling
chapter in your Owner’s Manual for more information.
DIESEL PARTICULATE FILTER SYSTEM*
The diesel particulate filter on your vehicle requires periodic regeneration
to maintain its correct function. Your vehicle will carry out this process
automatically. If you drive only short distances, frequently switch the
ignition on and o, or rapidly accelerate and decelerate oen, then a drive
that meets specific conditions is required to aid in the regeneration process.
Please see the Diesel Particulate Filter chapter in your Owner’s Manual for
more information.
SELECTIVE CATALYTIC REDUCTION SYSTEM*
To help reduce emission levels from the exhaust of the diesel engine, your
vehicle has a selective catalytic reduction system that relies upon diesel
exhaust fluid to operate properly. The selective catalytic reduction system
automatically injects diesel exhaust fluid into the exhaust system to enable
proper selective catalytic reduction system function. A warning message
appears in the information display when the diesel exhaust fluid level is low.
If a warning message appears, refill the diesel exhaust fluid tank as soon
as possible. See the Capacities and Specifications chapter in your Owner’s
Manual for more information.
COLD WEATHER STARTING
It is recommended that the engine block heater* be used for starting when
the temperature is 0°F (-18°C) or colder. The engine takes longer to start at
lower temperatures. It may crank for several seconds when very cold. If the
glow plug indicator illuminates, wait until the glow plug indicator turns o
before starting the engine.
When the glow plug pre-heat indicator turns o, fully press the brake and
press the push button ignition switch or turn the key to start. Release the
button or the key as soon as the engine starts. The engine does not start
until the glow plug indicator turns o. This may take several seconds in
extremely cold conditions.
MANUALLY SHIFTING GEARS
Your vehicle has a SelectShi Automatic transmission gearshi lever.
This gives you the ability to change gears up or down, without a clutch,
as preferred. Pressing the manual (M) button on the shier allows you to
manually select the gear you prefer. The shiing buttons are on the center
console or column shier.
Press the + button to upshi or the – button to downshi.
Return the transmission to a dierent gearshi position to deactivate
manual control.
HEATED STEERING WHEEL*
Press the button on the climate control to switch the heated steering wheel
on and o.
ADDITIONAL TRAILER TOWING FEATURES*
For more details, see the Towing chapter in your Owner’s Manual.
UNIVERSAL GARAGE DOOR OPENER*
The universal garage door opener replaces the common hand-held garage
door opener with a three-button transmitter located on the driver sun visor.
The system includes two primary features, a garage door opener and a
platform for remote activation of devices within the home. This functionality
allows you to program garage doors, as well as entry gates, security systems,
entry door locks and home or oce lighting.
FUNCTION
F-150 DIESEL INFORMATION
*if equipped
DIESEL INFORMATION
27
26
ESSENTIAL INFORMATION
F-150 ESSENTIAL INFORMATION
REFUELING
When refueling your vehicle:
1. Make sure the ignition is switched o.
2. If your vehicle is an HEV, press the button to open the fuel filler
door. For all other vehicles, pull the rear of the fuel filler door to
open it.
3. Insert the fuel filler nozzle into the fuel system up to the first notch,
and leave the nozzle inserted and resting against the fuel tank filler
pipe until you are done pumping.
4. Make sure you keep the fuel pump nozzle in a level position when
refueling or it may impact the flow of the fuel. Improper positioning
can also cause the fuel pump to shut o before the fuel tank is full.
5. When you finish refueling, slowly raise and remove the fuel pump
nozzle. Fully close the fuel door.
If you are refilling your tank from a fuel container, make sure you use the
fuel filler funnel included with your vehicle. Using an aermarket funnel
may not work with the capless system and could cause damage to your
vehicle. For more information and for your fuel filler funnel location, please
see the Fuel and Refueling chapter of your Owner’s Manual.
FUEL TANK CAPACITY, FUEL TYPES AND FLEX FUEL
Depending on your vehicle, your fuel tank size varies based on body style
and engine configuration. Refer to the Capacities and Specifications
chapter in your Owner’s Manual for more details. For non-flex fuel, non-
diesel vehicles, use only UNLEADED fuel or UNLEADED fuel blended with a
maximum of 15% ethanol and a minimum octane rating of 87.
Do not use any other fuel because it could damage or impair the emission
control system.
If your vehicle has a yellow fuel filler cap, a yellow bezel around the fuel
filler inlet, a yellow fuel filler housing or a yellow E85 label on the fuel tank
filler door, you have a flex fuel vehicle and can use either regular unleaded
fuel, E85 ethanol fuel or any mixture of the two.
Add at least half a tank of fuel when switching between regular unleaded
fuel or E85, and drive the vehicle immediately aer refueling for at least 5
miles (8 kilometers) to allow the vehicle to adapt to the change in ethanol
concentration. If you use E85 fuel exclusively, we recommend filling the fuel
tank with regular unleaded gasoline at each scheduled oil change.
See the Fuel and Refueling chapter in your Owner’s Manual for complete
flex fuel usage details.
F-150 ESSENTIAL INFORMATION
LOCATION OF SPARE TIRE AND TOOLS
The spare tire is located under the vehicle, just forward of the rear bumper.
The jack and tools are on the rear passenger side of your vehicle, behind the
passenger seat. A dissimilar spare tire is designed for emergency use only and
should be replaced as soon as possible.
For complete details on changing your tire, refer to the Changing a Road
Wheel chapter of your Owner’s Manual.
ROADSIDE ASSISTANCE
Your new Ford vehicle comes with the assurance and support of 24-hour
emergency roadside assistance. To receive roadside assistance in the United
States, call 1-800-241-3673. In Canada, call 1-800-665-2006.
TIRE PRESSURE MONITORING SYSTEM
The tire pressure monitoring system allows you to view the tire
pressure readings through the information display. When one or
more of your tires are under-inflated, your vehicle turns on the low
tire pressure warning light in the instrument cluster. If this
happens, stop and check your tires as soon as possible. Inflate
them to the proper pressure. Refer to the Tire Pressure Monitoring
chapter of your Owner’s Manual for more information.
EMERGENCY TOWING
If your vehicle becomes inoperable without access to wheel dollies
or a vehicle transport trailer, it can be flat-towed with all wheels
on the ground, regardless of the powertrain and transmission
configuration, under the following conditions:
• • Your vehicle is facing forward for towing in a forward direction.
• • Refer to the Manual Park Release information in the Automatic
Transmission chapter of your Owner's Manual to move your
transmission out of the park (P) position. Failing to do so may
result in damage to the transmission.
• • Maximum speed is 35 mph (56 km/h).
• • Maximum distance is 50 mi (80 km).
The Sykes4Ford
Roadside App
(Canada only) is
available via the
Apple App Store
®
or
Google Play™
Ford Motor Company gives
you peace of mind with the
complimentary Roadside
Assistance Program. Services are
available from the warranty start
date and last for 5 years or 60,000
miles (100,000 km), whichever
occurs first.
Roadside Assistance is honored
throughout the 50 states,
Puerto Rico and Canada.
Towing services are available to any
qualified Ford or Lincoln dealer within
the distance limits stated in your
Owner’s Manual.
If you’re out of warranty coverage but
need Roadside Assistance, you can still
access the service you need by paying a
one-time fee.
For additional information please visit:
US:
https://owner.ford.com/service/
roadside-assistance.html
Canada:
https://www.ford.ca/owners/
packages/roadside-assistance
U.S. ROADSIDE ASSISTANCE
1-800-241-3673
24 hours a day, 7 days a week
• Towing
• Battery Jump-Start
• Fuel Delivery
• Lock-out Assistance
• Flat Tire Change
• Winch Out
• Other Roadside Services
For future quick reference, enter your vehicle
information on the back of your Roadside
Assistance Card and place it in your wallet.
CANADA ROADSIDE ASSISTANCE
1-800-665-2006 or download
the Sykes4Ford App
• Towing
• Battery Boosting
• Fuel Delivery
• Lock-out Assistance
• Flat Tire Change
• Winch Out
• Other Roadside Services
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ford 2021 F-150 Reference guide
-
Ford 2021 Edge Reference guide
-
-
-
-
-
-
-
-