Dell PowerEdge 830 Specification

Type
Specification

Dell PowerEdge 830 is a high-performance, versatile server that can be used for a range of applications. With its powerful processors, ample memory, and flexible storage options, the PowerEdge 830 is well-suited for tasks such as virtualization, database management, and file serving.

The PowerEdge 830 is powered by two Intel Xeon processors, which provide excellent performance for demanding applications. The server also supports up to 512GB of DDR4 memory, which allows it to handle large workloads and multiple virtual machines.

Dell PowerEdge 830 is a high-performance, versatile server that can be used for a range of applications. With its powerful processors, ample memory, and flexible storage options, the PowerEdge 830 is well-suited for tasks such as virtualization, database management, and file serving.

The PowerEdge 830 is powered by two Intel Xeon processors, which provide excellent performance for demanding applications. The server also supports up to 512GB of DDR4 memory, which allows it to handle large workloads and multiple virtual machines.

www.dell.com | support.dell.com
Information Update
IDE Device Functionality
When a Dell Remote Access Controller (DRAC 4) card is used with any version of Red Hat
®
Enterprise Linux, the system may lose functionality of IDE devices. To avoid this, pass the
following parameter to the kernel command line at system boot:
linux ide2=0x1f0
Using this kernel command allows the operating system to access the internal CD-ROM drive
as well as the virtual CD-ROM on the DRAC 4.
IDE Tape Drives
To use an IDE tape drive with your system running Red Hat Enterprise Linux 4, add the following
lines to the
/etc/rc.local
file:
rmmod ide-tape
modprobe ide-scsi
mt -f /dev/st0 stoptions no-blklimits
mt -f /dev/st0 stoptions no-blklimits
NOTE: An issue exists with IDE tape backup units (TBUs) where you will receive illegal
request/invalid command
messages on the screen after running an mt command for the
TBU. Executing the command mt -f /dev/st0 stoptions no-blklimits twice in the rc.local file will resolve this
issue and allow the TBU to work as expected.
System Fans
Disregard all references to the front system fan as documented under "System Fans" in your
Installation and Troubleshooting Guide
. A front system fan and a back system fan provide air flow
to cool the system. Because the back system fan provides adequate cooling, the front system fan
has been removed.
July 2005
www.dell.com | support.dell.com
____________________
Information in this document is subject to change without notice.
© 2005 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Red Hat is a registered trademark
of Red Hat, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
www.dell.com | support.dell.com
信息更新
IDE
设备功能
Dell 远程访问控制器 4 (DRAC 4) 卡与任何版本的 Red Hat
®
Enterprise Linux 一起使用
时,系统将失去 IDE 设备的功能。要避免这一问题,请在系统引导时将以下参数传递到内
核命令行:
linux ide2=0x1f0
使用这一内核命令,操作系统就可以访问内部 CD-ROM 驱动器以及 DRAC 4 上的虚拟
CD-ROM
IDE
磁带驱动器
要在运行 Red Hat Enterprise Linux 4 的系统上使用 IDE 磁带驱动器,请在 /etc/rc.local 文件
中添加以下几行:
rmmod ide-tape
modprobe ide-scsi
mt -f /dev/st0 stoptions no-blklimits
mt -f /dev/st0 stoptions no-blklimits
注:IDE 磁带备份装置 (TBU) 存在问题,在对 TBU 运行 mt 命令后,您将会在屏幕上收到下列信
息:
illegal request/invalid command(非法请求 / 无效命令)。在 rc.local
件中执行两次 mt -f /dev/st0 stoptions no-blklimits 命令将会解决此问题,并使 TBU 按照要求工作。
系统风扇
忽略在《安装与故障排除指南》的“系统风扇”中记录的有关前端系统风扇的所有参考资
料。前端系统风扇和后端系统风扇提供了气流来冷却系统。由于后端系统风扇提供了足够
的冷却效果,因此已卸下了前端系统风扇。
2005 7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Dell PowerEdge 830 Specification

Type
Specification

Dell PowerEdge 830 is a high-performance, versatile server that can be used for a range of applications. With its powerful processors, ample memory, and flexible storage options, the PowerEdge 830 is well-suited for tasks such as virtualization, database management, and file serving.

The PowerEdge 830 is powered by two Intel Xeon processors, which provide excellent performance for demanding applications. The server also supports up to 512GB of DDR4 memory, which allows it to handle large workloads and multiple virtual machines.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI