Dakota Digital VHX-39C Mounting Manual

Hello! I am an AI chatbot trained to assist you with the Dakota Digital VHX-39C Mounting Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Manual # 650521B

VHX-39C

Dakota Digital VHX Instrument Installation

For 1939 Chevrolet Car

Your new VHX-39C kit includes:

Installation

Control Box

CAT5 Cable

Universal Sender Pack

Installation Manuals

VHX Display

1. Remove the stock gauges from the dash and retain the hardware for reassembly.

(2x) Washers

Switch Assembly

Manual # 650521B

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

3. Connect one end of the CAT5 cable to the

back of the VHX gauge. Take care when

routing the other of the CAT5 cable to the

control box mounting location.

2. The VHX system is a direct replacement of the original cluster, so use the two mounting tabs on the

gauge to secure the VHX system to the dash using the provided washers and stock nuts.

4. Refer to the main manual for wiring instructions to complete the VHX installation.