Hunter Fan 59029 Owner's manual
- Category
- Household fans
- Type
- Owner's manual
Hunter Fan 59029 is a ceiling fan, an electrical device that circulates air within a room. It can be used to cool people in a room, improve air quality, or help to remove moisture from a room.
This model comes with a variety of features, including:
- A reversible motor, which allows you to change the direction of the airflow to suit your needs.
- Three-speed settings, so you can choose the airflow speed that is most comfortable for you.
- A light kit, so you can use the fan to provide both light and air circulation.
- A remote control, so you can operate the fan from anywhere in the room.
Hunter Fan 59029 is a ceiling fan, an electrical device that circulates air within a room. It can be used to cool people in a room, improve air quality, or help to remove moisture from a room.
This model comes with a variety of features, including:
- A reversible motor, which allows you to change the direction of the airflow to suit your needs.
- Three-speed settings, so you can choose the airflow speed that is most comfortable for you.
- A light kit, so you can use the fan to provide both light and air circulation.
- A remote control, so you can operate the fan from anywhere in the room.
www.HunterFan.com
1.888.830.1326
PAGE
8
PAGE
15
PAGE
12
PAGE
7
30 inches
7 feet
PAGE
2
What to Expect with
Your Installation
Ceiling Bracket
Ladder
PAGE
3
Tools Needed
Wiring Canopy
Maintenance
& Cleaning
Blades Troubleshooting
Downrod
Switch Housing Light Kit
Preparation
Table of Contents
PAGE
13
PAGE
14
PAGE
4
Mounting Options
PAGE
16
PAGE
19
?
?
?
PAGE
20
Congratulations on purchasing
your new Hunter® ceiling fan! It will
provide comfort and performance
in your home or ofce for many
years. This installation and operation
manual contains complete
instructions for installing and
operating your fan.
We are proud of our work and
appreciate the opportunity to
supply you with the best ceiling fan
available anywhere in the world.
To register your fan, please visit:
www.HunterFan.com/register
Save your receipt for proof of purchase.
PAGE
5
1
M3528-01 • 02/11/16 • © Hunter Fan Company
www.HunterFan.com
1.888.830.1326
M3528-01 • 02/11/16 • © Hunter Fan Company
1.888.830.13261.888.830.1326
What to Expect with Your Installation
Know your wiring
If you are unfamiliar
with wiring, use a
qualied electrician.
You may need a
friend to help you.
Check box to see
fan weight
Assess location
30 inches
from blade tip
to nearest wall
or obstruction
7 feet
from bottom
edge of blade
to the oor
Select a downrod length
w.1 - To reduce the risk of re, electrical shock, or
personal injury, mount fan directly from building
structure and/or an outlet box marked acceptable for
fan support of 70 lbs (31.8 kg) and use the mounting
screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing
or servicing your fan, disconnect the power by turning
off the circuit breakers to the outlet box and associated
wall switch location. If you cannot lock the circuit
breakers in the off position, securely fasten a prominent
warning device, such as a tag, to the service panel.
w.3 - To reduce the risk of re, electrical shock, or motor
damage, use only Hunter Solid State Speed Controls.
w.4 - To reduce the risk of personal injury, do not bend the
blade brackets when installing the blade brackets, balancing
the blades, or cleaning the fan. Do not insert foreign objects
in between rotating fan blades.
c.1 - All wiring must be in accordance with national and
local electrical codes ANSI/NFPA 70. If you are unfamiliar
with wiring, use a qualied electrician.
c.2 - Use only Hunter replacement parts.
Assess ceiling angle
Read and Save These Instructions
This product conforms to UL Standard 507.
WARNINGS
CAUTIONS
Must be able to
secure the fan to
building structure or
fan-rated outlet box
1
2
3
Standard Downrod
for ceilings 8-10 feet high
Shorter Downrod
for fans installed close to ceiling
Longer Downrod
for ceilings 10 feet or higher
2
Ceiling angles greater
than 34° will require an
Angled Mounting Kit.
See page 4 for details.
www.HunterFan.com
1.888.830.1326
Tools Needed
Ladder
Power Drill
(optional)
9/64” Drill Bit
(optional)
Screwdrivers
Pliers Wire Strippers
If mounting to a support structure, you will also need these tools.
3
M3528-01 • 02/11/16 • © Hunter Fan Company
www.HunterFan.com
1.888.830.1326
4
M3528-01 • 02/11/16 • © Hunter Fan Company
1.866.268.1936
If you have an angled ceiling:
1. You will need a longer downrod (sold separately).
2. If your ceiling angle is greater than 34°, you will
also need an Angled Mounting Kit (sold separately).
Guide Touches
BOTH Ceiling & Wall
S
I
T
U
A
T
I
O
N
1
Guide Touches
Wall
but
NOT Ceiling
S
I
T
U
A
T
I
O
N
2
You need BOTH
a Longer
Downrod &
an Angled
Mounting Kit
You need ONLY
a Longer
Downrod
*most common
If you have a at ceiling:
Hang your fan by a standard downrod (included).
Mounting Options
Use Standard Mounting
or Low-Prole Mounting
to hang the fan from a at ceiling.
Use Angled Mounting
to hang the fan from a
vaulted or angled ceiling.
4
34
O
CEILING
WALL
OPTION
1
Standard
Mounting
OPTION
2
Angled
Mounting
2 3
SLIDE
toward ceiling
PLACE
against wall
1
FOLD
on dotted line
34°
Use the three steps below to determine if your ceiling angle is greater than 34°
Support
Structure
Ceiling
Outlet Box
(required)
Angled
Mounting
Style
Standard
Mounting
Style
Support
Structure
Ceiling
Outlet Box
(required)
M3528-01 • 02/11/16 • © Hunter Fan Company
www.HunterFan.com
www.HunterFan.com
1.888.830.1326
5
M3528-01 • 02/11/16 • © Hunter Fan Company
Ceiling Bracket
OFF
Refer to warning w.1 on pg. 2
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
Turn Power
Remove all four mounting isolators.
Align the tapered mounting holes in the
ceiling plate with the holes in the ceiling
bracket. Install the four ceiling plate
screws found in the hardware bag and
secure with the ange nuts using an 11/32”
wrench. Hold the ceiling bracket assembly
up to the outlet box and mark the screw
locations. To mount to support structure,
also mark the ceiling for drilling pilot holes.
Install the ceiling plate gasket onto the
ceiling plate. The four holes in the ceiling
plate should lineup with the four posts in
the gasket.
Tapered
Mounting
Holes
Ceiling
Plate
Gasket
Post
Ceiling
Plate
Ceiling
Plate
Flange
Nuts
Mounting
Isolator
Ceiling
Bracket
Ceiling Plate
Screws
www.HunterFan.com
1.888.830.13261.888.830.1326
www.HunterFan.com
Ceiling Bracket (continued)
For angled ceilings, point
opening toward peak.
Refer to warning w.1 on pg. 2
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
If you are unable to do this,
call Technical Support at
1-888-830-1326.
6
Use wood screws (included)
and washers when securing
to support structure with
approved electrical outlet
box. Drill 9/64” pilot holes in
support structure to aid in
securing ceiling bracket with
hardware found in
the hardware bag.
Use machine screws
(provided with outlet
box) and washers when
securing to existing ceiling
fan-rated outlet box. Make
sure it is securely installed
and is acceptable for fan
support of 31.8 kg (70 lbs)
or less.
Use the wood screw to poke holes through
the rubber gasket in order to install the
ceiling bracket assembly to your support
structure or ceiling fan-rated outlet box.
6
M3528-01 • 02/11/16 • © Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Ceiling Bracket (continued)
Preparation
1.888.830.1326
www.HunterFan.com
D
I
S
C
A
R
D
K
E
E
P
!
Remove the shipping blocks from the
motor. Save the screws. They will be
needed for blade iron installation.
Note: Some fans will have a shipping
ring instead of shipping blocks. Please
remove the ring and save the screws.
Time Saver Tip: Get a helper
to insert grommets, found in
the hardware bag, into the
blades while you’re doing the
next couple of steps.
7
M3528-01 • 02/11/16 • © Hunter Fan Company
1.888.830.1326
Downrod
Slide
Slide
1 2 3 4 5
678910
Sold Separately
Included
Longer
Downrod
for angled
ceilings or
ceilings 10’ or
higher
Shorter
Downrod
for fans installed
close to ceiling
Standard
Downrod
for ceilings 8-10’ high
Option 1Option 2
Option 3
skip to next page
If you need a different downrod length follow these steps:
Steps 1-5 to remove standard downrod pipe
Steps 6-10 to reassemble with new pipe
Included
(pre-assembled)
www.HunterFan.com
8
M3528-01 • 02/11/16 • © Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Downrod (continued)
Hand tighten the downrod (at
least 4-5 full turns) until it stops.
KEEP!
Remove the pre-installed setscrew so that
the downrod can be inserted.
K
E
E
P
!
1.888.830.1326
www.HunterFan.com
Slide the adapter cover onto the downrod
until it rests against the hanger ball.
Adapter
Cover
Hanger
Ball
Note: e adapter cover is not
used for low-profile mounting.
9
M3528-01 • 02/11/16 • © Hunter Fan Company
9
www.HunterFan.com
1.888.830.1326
8”
3/8”
C
U
T
&
S
T
R
I
P
(not to scale)
The wires can be cut, but leave at least 8”
extending from the top of the downrod.
Downrod (continued)
8”
3/8”
Tighten the setscrew with pliers.
DO NOT HAND TIGHTEN.
If the setscrew is not tightened
securely, the fan may fall.
1.888.830.1326
www.HunterFan.com
Lower the adapter cover until it rests
ush against the motor housing.
10
M3528-01 • 02/11/16 • © Hunter Fan Company
10
www.HunterFan.com
1.888.830.1326
11
M3528-01 • 02/11/16 • © Hunter Fan Company
www.HunterFan.com
Downrod (continued)
DO NOT PICK THE FAN UP BY THE
CANOPY OR WIRES. Place the downrod
ball into the slot in the ceiling bracket.
Put the wires and downrod through the
canopy. Let the canopy sit loosely on top
of the fan.
Note: Fan style may vary.
www.HunterFan.com
1.888.830.1326
Wiring
F
R
O
M
F
A
N
F
R
O
M
C
E
I
L
I
N
G
B
R
A
C
K
E
T
F
R
O
M
F
A
N
Using an orange wire
connector from
the hardware bag,
connect the 3 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling, downrod, and
hanging bracket.
(Grounding)
Green/Yellow
Stripe
Green/Yellow
Stripe
White
Black
(Grounded)
Note: To connect the wires,
hold the bare metal leads
together and place a wire
connector over them, then twist
clockwise until tight.
Using the orange wire
connectors from
the hardware bag, connect
the black wire (ungrounded)
from the ceiling to the black
and the blue wires from the
fan. Connect the white wire
(grounded) from the ceiling to
the white wire from the fan.
Using the orange wire
connectors from
the hardware bag,
connect the white wire
(grounded) from the
ceiling to the white wire
from the fan.
Connect the black wire
(ungrounded) from the
ceiling to the black wire
from the fan. Connect the
second (ungrounded) wire
from the ceiling to the blue
wire from the fan.
F
R
O
M
F
A
N
White
(Ungrounded)
Black
Blue
(Grounded)
F
R
O
M
C
E
I
L
I
N
G
(Ungrounded)
Blue
For Dual Switches
For a Single Switch
F
R
O
M
C
E
I
L
I
N
G
F
R
O
M
C
E
I
L
I
N
G
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
Refer to CAUTION c.1 on pg. 2
12
M3528-01 • 02/11/16 • © Hunter Fan Company
(Ungrounded)
www.HunterFan.com
1.888.830.1326
13
M3528-01 • 02/11/16 • © Hunter Fan Company
Canopy
Lift the canopy into place so that
the screw holes are aligned.
Position the canopy so that, when
lifted into place, the canopy ts into
the hanging bracket as shown.
Screw
Holes
Insert the two canopy screws
found in the hardware bag.
Note: Fan style may vary.
www.HunterFan.com
1.888.830.1326
M3528-01 • 02/11/16 • © Hunter Fan Company
Blades
14
Insert grommets found in the hardware
bag into the holes in the blades, then
secure each blade to a blade iron with
screws found in the hardware bag.
Lightly attach the blade irons to the
motor with screws found in
the hardware bag, then securely
tighten after both screws are attached.
Remember the screws that
you kept after removing the
shipping blocks (page 6)? You
need them plus ve more from
the hardware bag for this step.
www.HunterFan.com
1.888.830.1326
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
Insert the third screw, found in
the hardware bag, into place and then
tighten all three screws.
Switch Housing
Align the screw holes in the switch
housing gasket and the motor housing.
Screw two switch housing assembly
screws from the hardware bag halfway
into the motor housing. It does not matter
which two screw holes you choose.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing xture falling.
15
M3528-01 • 02/11/16 • © Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Light Kit
Want to install your fan without a light kit?
Go to www.HunterFan.com/FAQs and click
“How do I install my fan without the light kit?”
Install the included CFL bulb. When necessary,
replace with bulbs of same wattage.
To reinstall the globe assembly, align the posts on
the globe assembly with the holes in the shroud.
Make sure that the chain holes in the globe
assembly also line up with the chain holes in the
shroud. Lift the globe and posts until the threaded
end of the posts are visible through the shroud.
Install the three acorn nuts onto the posts so that
the light kit is secured to the shroud.
Unscrew the three acorn nuts by hand
and carefully detach the globe assembly
from the shroud.
Make sure the globe assembly is securely attached to the
shroud. Failure to properly secure all three acorn nuts could
result in the light xture falling.
Post
Acorn
Nut
Acorn
Nut
16
M3528-01 • 02/11/16 • © Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Light Kit (continued)
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light xture falling.
Lift the lower switch housing up until its
screw holes are aligned with the screw holes
in the upper switch housing.
Install the three switch housing screws
found in the hardware bag.
Connect the plugs from the upper and
lower switch housings. Make sure to line up
the colored markings on the connectors.
Screw
Holes
17
M3528-01 • 02/11/16 • © Hunter Fan Company
www.HunterFan.com
1.888.830.1326
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
See next page for fan
operation instructions.
Feed the chains from the fan and the light
switch down through the holes in the shroud.
Connect the appropriate pull chain pendant
to each of the short chains coming from the
nial and nial cap. The fan pull chain controls
the speed: from high to off. The light pull
chain controls the light xture: on and off.
M3528-01 • 02/11/16 • © Hunter Fan Company
18
www.HunterFan.com
1.888.830.1326
M3528-01 • 02/11/16 • © Hunter Fan Company
19
Maintenance & Cleaning
ON
Turn Power
Cleaning the fan - use soft
brushes or cloths to prevent
scratching. Cleaning products
may damage the nishes.
Changing the direction of air
ow - move the reverse switch
to the opposite position.
For questions regarding removing a light kit, call
customer service 1-888-830-1326.
Reverse Switch
www.HunterFan.com
1.888.830.1326
M3528-01 • 02/11/16 • © Hunter Fan Company
20
Troubleshooting
Excessive wobbling
• Tighten all of the blade and
blade iron screws until they
are snug.
• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
• Use the provided balancing
kit and instructions to balance
the fan.
Noisy Operation
• Tighten the blade and blade
iron screws until they are snug.
• Check to see if any of the
blades are cracked. If so, replace
all of the blades.
Fan doesn’t work
• Make sure power switch is on.
• Pull the pull chain to make sure
it is on.
• Push the motor reversing switch
rmly left or right to ensure that
it is engaged.
• Check the circuit breaker to
ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 10.
• Check the plug connection in
the switch housing.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Hunter Fan 59029 Owner's manual
- Category
- Household fans
- Type
- Owner's manual
Hunter Fan 59029 is a ceiling fan, an electrical device that circulates air within a room. It can be used to cool people in a room, improve air quality, or help to remove moisture from a room.
This model comes with a variety of features, including:
- A reversible motor, which allows you to change the direction of the airflow to suit your needs.
- Three-speed settings, so you can choose the airflow speed that is most comfortable for you.
- A light kit, so you can use the fan to provide both light and air circulation.
- A remote control, so you can operate the fan from anywhere in the room.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Hunter Fan 54059 Owner's manual
-
Hunter Fan 59208 Owner's manual
-
Hunter Fan 53095 Owner's manual
-
Hunter Fan 59049 User manual
-
Hunter Fan 53074 User manual
-
Hunter Fan 54015 Owner's manual
-
Hunter Fan 59032 Owner's manual
-
Hunter Fan 53026 Owner's manual
-
Hunter Fan 54067 Owner's manual
-
Other documents
-
Hunter 53081 Owner's manual
-
-
Hunter 59135 Installation guide
-
-
-
Hunter 53359 Installation guide
-
Hunter 59222 Installation guide
-
-
-
Hunter 53335 Installation guide