VarTech VT9109-S Pole Mount Industrial Display Mounting Arm Installation guide

VarTech
Brand
VarTech
Model
VT9109-S Pole Mount Industrial Display Mounting Arm
Category
Flat panel floor stands
Type
Installation guide

The VarTech VT9109-S Pole Mount Industrial Display Mounting Arm is a heavy-duty solution for mounting flat-panel monitors in demanding environments. It features a sturdy steel construction and a versatile design that allows for single or double pole mounting, as well as tilt and height adjustments. With its ability to support monitors up to 24 inches in size and weighing up to 20 pounds, this mounting arm provides a secure and flexible solution for a wide range of applications.

The VarTech VT9109-S Pole Mount Industrial Display Mounting Arm is a heavy-duty solution for mounting flat-panel monitors in demanding environments. It features a sturdy steel construction and a versatile design that allows for single or double pole mounting, as well as tilt and height adjustments. With its ability to support monitors up to 24 inches in size and weighing up to 20 pounds, this mounting arm provides a secure and flexible solution for a wide range of applications.

12.2.2005
VT9109-S
VARTECH
S Y S T E M S I N C.
Solutions for Demanding Applications
VT9109-S Installation Guide
HEADQUARTERS
11529 Sun Belt Ct.
Baton Rouge, Louisiana 70809
Phone 800.223.8050
International 001.225.298.0300
Fax 225.297.2440
E-mail sal[email protected]
Website www.vartechsystems.com
1 - Pole/Stand Assembly
Single: Insert the pole into the stand and tighten
screw in back of stand using 7/32 allen wrench.
Double: Follow above step, insert second pole in-
side first pole at preferred height and tighten screw
with provided 3/32 allen wrench.
2 - Collar Adjustment
Loosen the knob on the back of the collar so that
the collar is able to slide up or down. Find the de-
sired height and re-tighten the knob. *If you are
assembling the double, do this for both knobs
3 - Bracket & Tilt Assembly
Carefully remove base from flat panel monitor.
(See monitor user guide) Attach adapter plate
(75MM or 100MM) to the tilter mechanism, using
four (4) 10-32x3/8” Flat Head Philips screws.
4 - Attach Tilter/Braket to monitor
Align tilter and VESA bracket with hole pattern
on back of monitor. Use the four (4) M4-12 Phil-
ips Pan Head screws to attach the plate to back
of LCD
5 - Monitor to Pole Assembly
Tilt the monitor so it faces upward and locate the
set screw under the tilter. Insert the 7/32” Allen
wrench into set screw to adjust the tilt friction
*To tighten friction turn the wrench to the right.
*To loosen, turn wrench to the left
VT9109-S
VARTECH
S Y S T E M S I N C.
Solutions for Demanding Applications
VT9109-S Installation Guide
HEADQUARTERS
11529 Sun Belt Ct.
Baton Rouge, Louisiana 70809
Phone 800.223.8050
International 001.225.298.0300
Fax 225.297.2440
E-mail sal[email protected]
Website www.vartechsystems.com
After securing the plate to the flat panel insert the
tilter into the arm.
Screw the 10-32” Philips Pan Head screw and
washer and fasten them to the hole in the under-
side of the tilter shaft, locking the monitor in place
6 - Tilt Mechanism Adjustments
  • Page 1 1
  • Page 2 2

VarTech VT9109-S Pole Mount Industrial Display Mounting Arm Installation guide

VarTech
Brand
VarTech
Model
VT9109-S Pole Mount Industrial Display Mounting Arm
Category
Flat panel floor stands
Type
Installation guide

The VarTech VT9109-S Pole Mount Industrial Display Mounting Arm is a heavy-duty solution for mounting flat-panel monitors in demanding environments. It features a sturdy steel construction and a versatile design that allows for single or double pole mounting, as well as tilt and height adjustments. With its ability to support monitors up to 24 inches in size and weighing up to 20 pounds, this mounting arm provides a secure and flexible solution for a wide range of applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents