2. Mitsubishi Electric
  3. 6-Digit Digital Switch MR-DS60

Mitsubishi Electric 6-Digit Digital Switch MR-DS60 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Mitsubishi Electric 6-Digit Digital Switch MR-DS60 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
General-Purpose AC Serv
o
6-Digit Digital Switch
Model
MR-DS60
Installation Guide
C
HEAD OFFICE: TOKYO BLDG MARUNOUCHI TOKYO 100-8310
IB(NA)67181ENG-C(1704)MEE Printed in Japan Specifications are subject to change without notice.
Thank you for choosing this product. This guide is the installation guide for the 6-
Digit Digital Switch (MR-DS60). To ensure safety, always read through this guide
and the instruction manual of the servo amplifier used before using this product.
What is not written in this guide is described in the instruction manual of the servo
amplifier.
Please forward this guide and other attached documents to the customer who will
use this product. Also, always keep this guide and other documents.
1. SPECIFICATIONS AND OUTLINE DRAWING
Item Specifications
[Unit: mm]
100
5
50
93
46
80
37
9.5 9.5 9.5
14.8
1.6
3.5
28.4
1.6
52
MR-DS60MITSUBISHI
CON1CON2
SERIAL
MR-DS60
Type MR-DS60A
Number of digits Signal 6-digit BCD
Electrical characteristic 28 V DC (0.5 A)
Dielectric withstand voltage 500 Vr.m.s
Contact resistance 100 mΩ or less
Life 1,000,000 times
Operating temperature range 0 °C to 60 °C (32 °F to 140 °F)
Storage temperature range -5 °C to 70 °C (23 °F to 158 °F)
2. INSTALLATION
[Unit: mm]
Front installation Internal installation
Panel cut
2 × φ5
85
48
68
34
93
Square hole
Square hole
Panel cut
93
2 × φ5
3. TERMINAL ASSIGNMENT
Signal Pin No. Description
DCM2
COM2
DCM1
COM1
TB
CON1, CON2
DO04 9A
Common output 1, sign, ×1000, ×10000,
×100000 side common output
10B 10A
DO04 DO05
DO05 9B
Common output 2, ×1, ×10, ×100 side
common output
DI03 DI02 DI00 6A ×1, ×1000 bit 0
DI01 DI00 DI01 6B ×1, ×1000 bit 1
DI07 DI06 DI02 7A ×1, ×1000 bit 2
DI05 DI04 DI03 7B ×1, ×1000 bit 3
Signal Description
DI11 DI10 DI04 4A ×10, ×10000 bit 0
DCM2
Common input 2.
Connect with COM2 when selecting a block.
DI09 DI08 DI05 4B ×10, ×10000 bit 1
1B DI13 DI12 1A DI06 5A ×10, ×10000 bit 2
COM2
Common output 2.
Common 2 used for switch selection when
two or more digital switches are used.
DI07 5B ×10, ×10000 bit 3
DI08 2A ×100, ×100000 bit 0
DI09 2B ×100, ×100000 bit 1
DCM1
Common input 1.
Connect with COM1 when selecting a block.
DI10 3A ×100, ×100000 bit 2
DI11 3B ×100, ×100000 bit 3
COM1
Common output 1.
Common 1 used for switch selection when
two or more digital switches are used.
DI12 1A Sign bit 0
DI13 1B Sign bit 1
/