Smooth Fitness 9.25x User manual

USER’S MANUAL

SMOOTH AGILE TRAINER

USER WEIGHT LIMITATION: 350lbs(160kgs).

SERIAL NUMBER (found on frame):

2 SMOOTH AGILE TRAINER

PREASSEMBLY

For future service or related questions:

Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth

Fitness AGILE Dynamic Motion Trainer.

Name: ______________________________ Phone Number: ___________________ Receipt: ______________________

Open the boxes:

You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes.

Check the Parts List for a full count of the number of parts included for this product to be assembled properly. If you are missing

any parts or have any assembly questions call your local dealer or contact us directly at 888-800-1167.

Gather your tools:

Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require to assemble

the unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.

Clear your work area:

Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free from

anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable amount of free

area around the unit for unobstructed operation.

Invite a friend:

Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person when

assembling this product.

User Weight Limitation:

Please note that there is a weight limitation for this product. If you weigh more than 350lbs. it is not recommended that you use this

product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is not intended to support users

whose weight exceeds this limit.

www.smoothfitness.com

3

POWER REQUIREMENTS

Power Requirements:

IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC

SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE

PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT

THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.

This AGILE Trainer can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges

and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility

of AGILE Trainer damage, always use a surge protector (not included) with your AGILE Trainer.

Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a

UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an

electrical rating 110VAC, 15 amps.

This AGILE Trainer must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for

electric current, should the AGILE Trainer malfunction. This AGILE Trainer is equipped with an electrical cord that has an

equipment-grounding conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge

protector into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing

below.

GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers

may cause this equipment to function improperly.

4 SMOOTH AGILE TRAINER

SUPPLIED COMPONENTS

This list identifies the major components you will use to assemble this product.

Main Frame Assembly

Handleba

r

Assembly

Undercarriage Cover

Pivot Arm Cover

Upright -Right

Upright-Left

Console Support

Fixed Handlebar

Base Frame

[ 110 ]

[ 111 ]

[ 719 / 720 ]

Pivot Arm Cove

r

Upright-Right

Upright-Left

Handlebar Assembl

y

Main Frame Assembl

y

Fixed Handleba

r

Console Support

Undercarriage Cove

r

Base Frame

BOX - B

BOX - A

www.smoothfitness.com

5

SUPPLIED COMPONENTS

This list identifies the major components you will use to assemble this product.

[ 709 / 710 ]

[ 712 / 711 ]

Front Side Panel

Computer

Compute

r

Front Side Panel

BOX - D

BOX - C

6 SMOOTH AGILE TRAINER

SUPPLIED HARDWARE

This list identifies the hardware you will use to assemble the product. To help distinguish

between the various types of screws and bolts, use the scale below to measure them and

compare them to the sizes listed.

(1 piece)

H

(1 piece)

G

(1 piece) (1 piece)

A

B

C

(1 piece)

DE

F

(1 piece)

2PCS

515

2PCS

514

6PCS

513

10PCS

512

1PCS

511

2PCS

510

2PCS

509

1PCS

508

4PCS

507

2PCS

506

2PCS

505

8PCS

504

2PCS

503

2PCS

502

501

721 Pedal Arm Front Pivot 4PCS

718 Pivot Side Cap 2PCS

717 Pivot Cap 2PCS

702 Upright Side Cover-Right

701 Uprig

h

tSi

d

e Cover-Left

703 Console BackCover

2PCS

Water Bottle

20x78-M14x35mmBolt

12x62-M10x20mmBolt

M5 x 8mm Screw

M8 x 20mm Allen Head Bolt

M8 x 40mm Allen Head Bolt

M8 x 65mm Allen Head Bolt

M10x20mmAllenHeadBolt

M10 x 62mm Allen Head Bolt

M6x40mmScrew

12x20x2SpringWasher

M10 Nylon Nut

4 x 12mm Screw

4x19mmScrew

12x18x24.5mmSleeve

12 x 22 x 2 Washer

516

2PCS

M5 x 6mm Bolt

J

K

Allen Wrench

5mm

(1 piece)

I

Allen key

8mm6mm

Allen key

5mm

2.5mm

Allen key

Wrench

Slotted

Screwdriver

Screwdriver-L

Chest BeltPower Cord

326 Taper FixingInsert 4PCS

MILLIMETERS

BOX - E

www.smoothfitness.com

7

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

100

101 Fixed Handlebar 1

102 Crossbar 1

103 Console Support Tube 1

104 Base Frame 1

105 Main Frame 1

106 Pedal Arm-Left 1

107 Pedal Arm-Right 1

108 Action Handlebar - Left 1

109 Action Handlebar - Right 1

110 Upright-Left 1

111 Upright-Right 1

112 Moving Linkage-Left 1

113 Moving Linkage-Right 1

114 Incline Frame 1

115 Incline Transmission Tube-Front 1

116 Incline Transmission Tube-Back 1

117 Clamp Bracket 2

118 Flywheel 1

119 Tension Wheel Bracket 1

120 Pedal Swing Arm 2

200

201 Bearing 6004 4

202 Bearing 6005 2

203 Bearing 6300 6

204 Bearing 6804 4

205 Bearing 2203 2

206 Bearing 6205 4

207 Bearing 608zz 8

208 Action Handle Bar Shaft Bushing 2"x38-20 2

209 Action Handle Bar Shaft Bushing 2"x38-9 2

210 Elector-magnetic System 1

211 Oil-Impregnated Bearing 2

212 Clamp Bushing- Top 2

8 SMOOTH AGILE TRAINER

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

213 Clamp Bushing- Bottom 2

214 Belt 1

215 Aluminum Disk 1

216 Crank 1

217 Crank 25x186.7 1

218 Crank Disk Axle 1

219 Wheel 2

220 Pedal Buffer Set 2

221 Level Adjuster 2

222 Crank Disk 1

224 Action Handle Bar End Cap 2

225 Hand Pulse Sensor Cover 2

226 Oval Tube Cap 2

227 Hand Pulse Sensor Back Cover 2

228 Fixed Handlebar Foam Grip 2

229 Electro-magnetic System Bracket 1

230 Flywheel Axle Fixing Plate 1

231 Speed Sensor Base 1

232 Pedal Support Base 2

233 Pedal Fixing Base 2

234 Crank Disk Oval Cap 1

235 Switch Fascia 1

238 Bearing 2201 2

239 5/16" Cable Tie 1

240 1/8" Cable Tie 1

241 3/8" Cable Tie 4

242 Wheel Bushing 4

243 Bearing 6000 3

244 Self-adhesive Wire Clip 1

249 3/16" Cable Tie 1

250 1/4" Cable Tie 9

251 Hand Grip Gasket 2

300

302 Rear Shroud-Left 1

303 Rear Shroud-Right 1

304 Rear Side Panel-Left 1

305 Rear Side Panel-Right 1

www.smoothfitness.com

9

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

306 Switch Plate 1

307 Pedal 2

308 Toe Cap 2

309 Pedal Soft Cushion 2

310 Pedal Bushing Cover-Left 2

311 Pedal Bushing Cover-Right 2

312 Console Housing - Upper 1

313 Console Housing – Bottom 1

314 Console Plastic Cover 1

315 Rubber Strip-4 4

316 Rubber Strip-3 4

317 Rubber Strip-2 4

318 Rear Shroud Plug-1 2

319 Rear Shroud Plug-2 2

320 Rubber Strip-1 4

321 Cable Plug 2

322 Incline Transmission Tube Holder 1

323 Moving Linkage Bushing 4

324 Control Board Cover 1

325 Pedal Swing Arm Cap 2

326 Taper Fixing Insert 35

327 Support Lump 1

328 Oblong Cushion 2

329 Circular Cushion 2

330 Rubber Cushion – Front 2

331 Rubber Cushion – Rear 2

332 Fixing Insert 22

333 Fixing Insert-Metal Inside 7

336 Action Handlebar Bar Front Cover 4

337 Action Handlebar Bar Cover 2

338 Elbow-Left 2

339 Elbow-Right 2

340 Button 1

341 Taper Fixing Insert-Metal Inside 3

10 SMOOTH AGILE TRAINER

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

400

401 Fix Bolt 2

402 25 x 10 x 55 - M10 x 15mm Bolt 2

403 M5 x 8mm Allen Head Bolt 7

404 M6 x 12mm Allen Head Bolt 11

405 M8 x 15mm Allen Head Bolt 23

406 M8 x 25mm Allen Head Bolt 2

407 M10 x 20mm Allen Head Cap Bolt 4

408 M10 x 40mm Allen Head Bolt 1

409 M4 X 40mm Allen Head Cap Bolt 1

410 M8 x 50mm Allen Head Cap Bolt 2

411 M10 x 40mm Allen Head Cap Bolt 2

412 M12 x 70mm Allen Head Cap Bolt 2

414 M8 x 20mm Bolt 6

415 M3 x 8mm Screw 2

416 M8 x 65mm Allen Head Cap Bolt 2

417 M6 x 12mm Allen Head Cap Bolt 2

418 M8 x 16mm Allen Head Cap Bolt 4

419 M8 x 90mm Allen Head Bolt 4

421 M8 Nylon Nut 8

422 M10 Nylon Nut 3

423 M14 Nylon Nut 3

424 M8 Blind Nut 2

425 M6 x 15mm Screw 2

426 3/4" x 16 Nut 2

427 Flywheel Axle 1

428 10 x 36mm Shaft 2

429 12 x 210 - M14 x 70mm Shaft 1

430 Bushing 12 x 60 4

431 M4 x 15mm Screw 2

432 4 x 12mm Screw 8

433 Action Handlebar Shaft 1

www.smoothfitness.com

11

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

434 Pedal Arm Support Axle 2

435 Crank Axle Bushing 2

436 M10 C Clip 6

437 M12 C Clip 2

438 M42 C Clip 2

439 10 x 18 x T1.0 Fiber Washer 2

440 15 x 8 x T2.0 Spring Washer 11

441 10 x 16 x T2.0 Spring Washer 7

442 20 x 6 x T2.0 Washer 3

443 32 x 6 x T2.0 Washer 1

444 35 x 14 x T2.0 Washer 2

445 10 x 18 x T5.1 Washer 4

446 M3 x 8mm Screw 2

447 M3 x 10mm Screw 18

448 4 x 12mm Screw 47

449 M2 x 6mm Screw 8

450 4 x 12mm Screw 23

451 M32 C Clip 2

452 M4 x 45mm Screw 2

453 M4 x 8mm Screw 4

454 7 x 12 - M5 x 5mm Pin Nut 4

456 10 x 23 x T2.0 Washer 4

457 6 x 10 x 1 Spring Washer 2

458 28.6 x 35.5 Bushing 2

459 12 x 20 x 0.5 Washer 2

460 12 x 20 x 2 PU Washer 2

500

501 12 x 62 - M10 x 20mm Bolt 2

502 20 x 78 - M14 x 35mm Bolt 2

503 M5 x 8mm Screw 2

504 M8 x 20mm Allen Head Bolt 8

505 M8 x 40mm Allen Head Bolt 2

506 M8 x 65mm Allen Head Bolt 2

507 M10 x 20mm Allen Head Bolt 4

508 M10 x 62mm Allen Head Bolt 1

12 SMOOTH AGILE TRAINER

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

509 M6 x 40mm Screw 2

510 12 x 20 x 2 Spring Washer 2

511 M10 Nylon Nut 1

512 4 x 12mm Screw 10

513 4 x 19mm Screw 6

514 12 x 18 x 24.5mm Sleeve 2

515 12 x 22 x 2 Washer 2

516 M5 x 6mm Bolt 2

600

601 Speed Sensor 1

602 Magnetic Sensor 1

603 Power Switch 1

604 Power Breaker 1

605 Power Insert Set 1

606 Receiver 1

607 Transformer 1

608 Computer PC Board 1

609 Elevation Motor 1

610 Control Board 1

611 Button Sticker 1

612 Overlay 1

613 Elector-magnetic Wire 1

614 Power Connect Wire 3

615 8Pin Power Wire-Top 200mm 1

616 8Pin Power Wire-Upper 1000mm 1

617 8Pin Power Wire-Middle 900mm 1

618 8Pin Power Wire-Lower 800mm 1

619 8Pin Power Wire-Bottom 2700mm 1

620 3C Power Wire 1000mm 1

621 Hand Pulse Sensor Wire-Top 350mm 2

622 Hand Pulse Sensor Wire-Upper 620mm 2

623 Hand Pulse Sensor Wire-Lower 650mm 2

624 Receiver Wire 350mm 1

626 Control Board Connect Wire 250mm 1

www.smoothfitness.com

13

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

700

701 Upright Side Cover-Left 1

702 Upright Side Cover-Right 1

703 Console Back Cover 1

704 Pivot Arm Cover-LL 1

705 Pivot Arm Cover-LR 1

706 Pivot Arm Cover-RR 1

707 Pivot Arm Cover-RL 1

708 Pivot Arm Insert 2

709 Front Side Panel-LL 1

710 Front Side Panel-LR 1

711 Front Side Panel-RR 1

712 Front Side Panel-RL 1

713 Front Side Frame-LL 1

714 Front Side Frame-LR 1

715 Front Side Frame-RR 1

716 Front Side Frame-RL 1

717 Pivot Cap 2

718 Pivot Side Cap 2

719 Undercarriage Cover-Left 1

720 Undercarriage Cover-Right 1

721 Pedal Arm Front Pivot Cover 4

A Screwdriver-L 1

B 2.5mm Allen Key 1

C 5mm Allen Key 1

D 6mm Allen Key 1

E 8mm Allen Key 1

F 14 x 17 Wrench 1

G Slotted Screwdriver 1

H 5mm Allen Wrench 1

I Water Bottle 1

J Power Cord 1

K Chest Belt 1

14 SMOOTH AGILE TRAINER

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

228

101

450

703

326

509

224

340

313

312

612

611

102

449

608

424

447

314

208

433

208

321

504

www.smoothfitness.com

15

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

109

111

103

238

451

510

501

201

209

448

336

432

336

337

448

416

506

504

701

721

501

504

702

514

515

721

504

209

504

505

447

227

225

238

514

451

515

510

432

336

432

448

337

448

201

416

506

110

108

112

332

716

715

513

712

513

315

316

317

332

512

711

447

320

326

513

710

513

512

332

713

714

332

709

315

316

317

320

447

326

513

251

225

227

447

339

326

338

339

338

113

16 SMOOTH AGILE TRAINER

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

205

442

417

405

204

414

331

307

406

309

308

405

450

421

419

207

220

421

404

430

207

233

437

323

459

448

310

323

311

448

106

438

502

460

457

232

330

721

326

107

460

204

437

323

405

417

442

205

207

419

421

414

233

220

326

310

448

430

311

450

405

232

307

438

421

502

457

404

450

308

309

406

307

331

330

459

721

www.smoothfitness.com

17

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

407

441

117

212

213

456

248

247

245

246

436

230

215

118

403

404

441

407

117

212

213

456

247

248

246

245

206

458

206

458

206

444

423

440

202

435

234

441

426

404

411

602

431

221

218

226

214

222

414

202

435

426

221

411

441

443

404

216

434

226

405

440

439

120

243

327

425

516

440

418

440

116

418

511

423

444

717

503

718

503

717

325

211

114

115

325

508

442

422

441

609

408

440

439

427

436

440

405

410

412

421

229

412

429

423

322

405

434

217

210

18 SMOOTH AGILE TRAINER

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

704

326

708

705

512

436

448

328

329

512

720

415

403

235

604

605

603

306

333

448

332

304

231

448

454

610

453

324

452

319

448

332

448

305

319

318

448

402

445

119

203

403

409

422

446

512

719

507

326

328

448

607

302

318

601

329

303

450

105

104

445

448

512

219

242

436

428

436

219

242

436

428

250

448

448 240

450

708

450

326

706

707

512

244

401

249

241

250

239

448

341

www.smoothfitness.com

19

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

601

613

619

620

622

620

614

621

624

606

340

626

615

607 609

613

623

615

616

617

618

619

620

614

620

619

20 SMOOTH AGILE TRAINER

ASSEMBLY

STEP 1: Connect the Main Frame to Base Frame

(A) Rotate Incline Frame (114) up to vertical position.

(B) Place cardboard block under Main Frame tube to provide clearance to

position Base Frame (104) for assembly.

(C) Position Base Frame (104) under mounting bracket of the Main Frame

(105) and align the 4 hole bolt pattern.

(D) Remove cardboard block and lower Main Frame (105) onto Base Frame

(104). Mounting Brackets should seat fully onto Base Frame (104). Secure

using four (4) M10 x 20mm Allen Head Bolts (507).

507 X4

Mounting Brackets

105

619

104

618

507

114

A

B

c

5

0

7

104

1

0

5

Page is loading ...

Smooth Fitness 9.25x User manual

This manual is also suitable for

Smooth Fitness 9.25x User manual

Related papers

Other documents