Pyle PHLSN61 Owner's manual

Type
Owner's manual

This manual is also suitable for

IMPORTANT SAFEGUARDS
Please read the safety instructions before using this
product. The safety instructions provided here are to
help you use this product safely and correctly, and
also to prevent you from injuring yourself or others.
When using electrical products, especially when
children are present, basic safety precautions should
always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
WARNING
Do not place or store the charger case where it can
fall or be pulled into a bathtub, sink or toilet.
Do not place or drop in water or other liquid.
Do not reach for the charger case that has fallen into
water or other liquid. Unplug immediately
Do not use while bathing.
Unplug charger case before cleaning and assure that
it is dry before plugging it into an electrical outlet.
PRODUCT CHARACTERISTICS
Charge using a standard USB DC5V power supply
Compatible with Pyle and other fitting electronic
toothbrushes.
Connect to your computer's USB interface. The
power indicator light will shine, close the lid, power
indicator light is lit, close the lid, it will begin to
disinfect the toothbrush head: 7+1 minutes later, UV
lamp will automatically shut down.
OPERATION
Open the lid, place a suitable handle and brush head.
Using a USB cable to connect the charger case to a
compatible USB interface or DC5V 600 MA power
supply.
Connect the computer USB interface, power
indicator light, charge time is up to 24 hours.
Plug USB in to outlet, close the cover and the UV
sanitizer light will begin working, as well as
charging the toothbrush.
A Toothbrush Head Placement
B Toothbrush Handle Placement
C Top Lid
D Built-in UV Disinfecting Light
E Lid Enclosure
F Mini Toothpaste Tube Placement
G Power LED Indicator
H USB Port
HOW TO CHARGE
Place the toothbrush handle in the charging travel
case.
Connect the USB cable into the travel case plug and
then connect to computer (or other compatible) USB
power source.
The LED indicator light will flash once when the
battery charging reaches 100%
HOW TO USE THE UV LIGHT SANITIZER
To use the UV light sanitizer, insert your electronic
tooth brush head, into the designated tooth brush
head placement area. Then connect the unit via the
included USB cable to a compatible USB port power
source.
(The UV disinfecting / sanitizing automatically
powers off after 7 minutes -- after connecting the
unit to a compatible USB power source)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Pyle PHLSN61 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI