Essence 1200 Quick start guide

Brand: Essence

Model: 1200

Type: Quick start guide

This manual is also suitable for

1600

Essence 1200 is an advanced electrostatic speaker system designed to deliver exceptional audio quality in various settings. With its versatile design, it can be conveniently installed on the floor or mounted on the wall, making it suitable for both home and professional audio applications. The speaker operates without an on/off switch, automatically turning on when plugged in and drawing minimal power while remaining safe to the touch. Its high-voltage interior requires caution to avoid shocks, and regular maintenance includes dust removal and occasional cleaning of the rails and stators.

Essence 1200 is an advanced electrostatic speaker system designed to deliver exceptional audio quality in various settings. With its versatile design, it can be conveniently installed on the floor or mounted on the wall, making it suitable for both home and professional audio applications. The speaker operates without an on/off switch, automatically turning on when plugged in and drawing minimal power while remaining safe to the touch. Its high-voltage interior requires caution to avoid shocks, and regular maintenance includes dust removal and occasional cleaning of the rails and stators.

maarten@essenceelectrostatic.com

bob@essenceelectrostatic.com

 This flash symbol indicates that the

outlet carrying this symbol is carrying

a dangerous voltage. This flash

symbol indicates that the outlet

carrying this symbol is carrying a

dangerous voltage.

The exclamation mark indicates that

special attention has to be given to the

indicated remark. It means pay

attention to the marked connector, be

sure its properly connected.

For Floor Standing Installations

: Attach footplate for

floor-standing installations by laying speaker on a flat

surface. Leave poly bag in place except for bottom, this is

where the footplate is attached to the rails with 4 hex

screws. The footplate has small rubber feet to raise the

base off the floor ¼” (.63 cm). For optional Tip-Toes, see

below.

For Wall-Mount Installations

, attach

Universal VESA Standard Wall-Mount Plate

with holes pre-drilled for the 100mm or 75mm

hole pattern. The side rails are pre-drilled and

attachment screws are provided in the kit.

 There is no on/off switch, plugging them in

turns them on and they are meant to

remain on. Leave them on full time, they

draw less than 2 watts and are safe.

 The speaker is safe to touch but don’t stick

tools or other sharp tools into them, there

is high voltage on the inside and you don’t

want to get shocked.

 Reminder: keep them dust free with Dust-

Off, sold in spray-cans everywhere. Use

stainless steel polish on the rails and a

lightly damp soft cotton cloth on the acrylic

stators. Do not spray any liquid or polish on

the stators.

 Run in time is approx. 72 hours. Thanks for

following these instructions, the full

manual will be posted at our site soon..

link

 We, Essence Electrostatic LLC , Schipholweg 939, 2143 CE

Boesingheliede, Netherlands, 0031 023 555 18 61 declare

under our sole responsibility that the products known as

 Essense™ Electrostatic Speakers Models 1200, 1600,

1900, and 600 to which this declaration relates are in

conformity with the following standard(s) or other

normative document(s)

 Council Directive 2006/42/EC (May 17, 2006) on the

Approximation of the Laws of the Member States Relating

to Machinery;

 Council Directive 2004/108/EC (December 15, 2004) on

Electromagnetic Compatibility;

 List European standards used

 Council Directive 2006/95/EC (December 12, 2006) on

Low Voltage Equipment Safety;

 List European standards used

 Council Directive 2000/14/EEC amended by Directive

2005/88/EC (June 17, 2006) about noise limits and

labelling requirements machines intended for use

outdoors.

 The Technical Construction File required by this Directive

is maintained at the corporate headquarters of Essence

Electrostatic LLC, Schipholweg 939, 2143 CE

Boesingheliede, Netherlands, 0031 023 555 18 61

 The authorized representative located within the

Community is:

 Maarten Smits, Westerhoutstraat 2, 2012JR Haarlem,

Netherlands,



 Date of issue: January 15, 2014

 Place of issue: Boesingheliede , Netherlands

 x

 Maarten Smits, CEO & Chief Engineer, Essence

Electrostatic LLC.

Schipholweg 939

2143 CE

Boesingheliede

Netherlands

0031 620362270

maarten@essenceelectrostatic.com

Sales and Marketing Office USA

Bob Rapoport, 727-580-4393

bob@essenceelectrostatic.com

1
2
3
4
5
6
7
8
9
10
11
12

Essence 1200 Quick start guide

Brand: Essence

Model: 1200

Type: Quick start guide

This manual is also suitable for

1600

Essence 1200 is an advanced electrostatic speaker system designed to deliver exceptional audio quality in various settings. With its versatile design, it can be conveniently installed on the floor or mounted on the wall, making it suitable for both home and professional audio applications. The speaker operates without an on/off switch, automatically turning on when plugged in and drawing minimal power while remaining safe to the touch. Its high-voltage interior requires caution to avoid shocks, and regular maintenance includes dust removal and occasional cleaning of the rails and stators.

Download PDF

in other languages

eesti: Essence 1200 Lühike juhend

Other documents