Sigma HEXA-600C How To Assemble

Brand: Sigma

Model: HEXA-600C

Type: How To Assemble

Sigma HEXA-600C is a professional camera housing with 5:1 tilt and 10:1 reduction on roll for very fine and smooth gyro stabilization. It is suitable for large DSLRs like Canon 7D/5D II or high-quality HD video cameras. It is made of lightweight alloys and machined engineering plastics and features a high-speed coreless roll servo with an external 10-turn potentiometer.

SIGMA HEXA-600C User Manual Page 1

M2 x 25 Socket Screw

19mm

Back View

All screw need to use screw

glue for higher intensity

Not use

M2.5 x 25 Socket Screw

Note the direction of this gap

Note the direction

4x M2 x 25 Socket Screw

1x M2.5 x 25 Socket Screw

One hole

TWO holes

6 sets complete

305mm

420mm

325mm

288mm

578mm

40mm

STEP 1

How to assemble

SIGMA HEXA-600C

Version 1.1

Read the manual carefully before using SIGMA HEXA-600C

250mm

88mm

146mm

SIGMA HEXA-600C User Manual Page 2

STEP 2

Upper Plate Lower Plate

6 x Arm Mount

12 x M2.5 Socket Screw

Back View

M2.5 x 25Socket Screw

Complete

Note the direction

STEP 3

Use Nylon Screw (M3 x 15)

Device Mounting Plate

M2.5 x 25 Socket Screw

Use Nylon Screw (M3 x 40)

Battery Mounting Plate

HEAD Direction

( + Mode)

SIGMA HEXA-600C User Manual Page 3

Install Lower Plate

Note the direction

Prepare the parts

M2 x 12 Screw

M2 x 14 Screw

Complete

Length: 320mm

Complete

STEP 4

STEP 5

SIGMA HEXA-600C User Manual Page 4

M3 x 12 Socket Screw

M3 x 6 Socket Screw

4x M5.0 Aluminum column

Aluminum column

M3 x 6 Socket Screw

Lower Plate

You need to install the 4 sets aluminum column on the frame.

Shown above is one of them.

HEAD Direction( + Mode)

HEAD Direction(X Mode)

Aluminum column

install here(cross this hole)

Aluminum column

install here(cross this hole)

M3 x 6 Socket Screw

STEP 6

STEP 7

SIGMA HEXA-600C User Manual Page 5

Aluminum column

install here(cross this hole)

M3 x 12 Socket Screw

Complete

STEP 8

97mm

73mm

Pull to each side for higher intensity

Approx: 150mm

Wrap with tape

is recommend

SIGMA HEXA-600C User Manual Page 6

Install AV200 to

SIGMA HEXA-600C

Read the manual carefully before install

Photohigher Mini AV200 Camera Gimbal

This gimbal is a professional level camera housing with 5: 1 tilt, 10: 1

reduction on roll for very fine and smooth gyro stabilization directly

off the flight controller of your SIGMA HEXA-600C.

It is precision engineered and well designed and crafted it is primarily

constructed from lightweight alloys and machined engineering plastics.

It has a high speed coreless roll servo with an external 10 turn poten-

tiometer - digital servo on tilt driving a toothed belt for smooth motion

with a fully adjustable camera table for c of g positioning and balancing.

The mount will easily house a large DSLR (Canon 7D/5D II) or a high

quality HD video camera - due to its weight and size it is recom-

mended that a heavy lift Droidworx AD-4 or AD-6 is used. With

heavier payloads shorter flight times are to be expected.

Weight: 590 grams

Internal space dimensions: 145mm (high) x 170mm (wide).

Install the Nylon Screw (M3 x 6)

SIGMA HEXA-600C User Manual Page 7

M3 x 12 Socket Screw

M3 Socket Screw (Prepare by yourself)

Nylon Nut (M3 x 6)

Complete

SIGMA HEXA-600C User Manual Page 8

Total: 380g

Total: 460g

With AV200

Total: 1080g

With AV200+5DII

Total: 2460g

SIGMA HEXA-600C User Manual Page 9

Install FC3X-360CM to

SIGMA HEXA-600C

Read the manual carefully before install

SIGMA FC3X-360CM Multirotor 3-Axis Carbon Fiber DSLR Gimbal

SIGMA FC3X-360CM 3-axis camera mount is specially designed for SIGMA HEXA-600C aircraft and XAircraft X650V4/V8, made by carbon fiber

material, having structure of high structural strength, light weight. It is capable of installing DSLR and most of DV. The 3-axis includes Tilt, Roll and

horizental(Pan), wherein the direction axes can rotate in unlimited 360 degrees, the rotation speed and direction are controlled by radio set.

SIGMA FC3X-360CM using a tripod and tripod-in-one design, when camera mount rotates in horizontal, the tripod is also synchronous rotation,

this way will avoid possibility that traditional camera mount will photographed the tripod while taking photos, which offers more flexible and

creative space for photography workers. Tilt axis using the dual steering gear backlash design, which could not only offer strong drive power,

but also more higher control precise. The Tilt and Roll axis both can be driven by common flight controller, such as: DJI WK-M, ACEONE or

XAircraft FC1212+AHRS,etc. so as to obtail a better gyro stability augmentation effect. Other flight controllers, such as FY-30A, etc can also be

used to finish closed-loop control augmentation.

Product Technical Parameter:

Weight: 1.06kg

Outside dimensions: 310mm (W) x 244mm (D) x 278mm (H)

Camera mount innerspace size: 170mm (W) x 80mm (D) x 140mm (H)

Maximum load: 2kg (SLR camera and most DV can be installed)

Sigma HEXA-600C How To Assemble

Sigma HEXA-600C How To Assemble

Sigma HEXA-600C How To Assemble

Related papers

Other documents