Proline ProLine IH680P-U User manual

Brand: Proline

Model: ProLine IH680P-U

Category: Hobs

Type: User manual

Proline Proline IH680P-U is a domestic induction hob with electromagnetic cooking zones. It has various safety features such as protection from over-heating, detection of small or non-magnetic items, residual heat warning, and auto shut down. The induction hob is easy to use, durable, and safe. It is made of imported materials. The hob has a user-friendly interface with micro-computerized controls and multi-functions. It is suitable for all types of cooking.

Model : IH680P-U

INSTRUCTION MANUAL

Dear Customer,

Thank you for purchasing a Prestige Ceramic Hob.

The safety precautions and recommendations in these

instructions are for your own safety and that of others.

They will also provide a means by which to make full

use of the features offered by your appliance.

Please keep this booklet in a safe place. It may be

useful in future, either to yourself or to others in the

event that doubts should arise relating to its operation.

This appliance must be used only for its intended

purpose, that is for the domestic cooking of foodstuffs.

Any other form of usage is to be considered as

inappropriate and therefore dangerous.

The manufacturer decline

s all responsibility in the

event

of damage caused by improper or incorrect use of

the appliance.

CEDeclaration of conformity

– This cooking hob has been designed to be used only for cooking. Any other use (such

as heating a room) is improper and dangerous.

– This cooking hob has been designed, constructed, and marketed in compliance with:

-Safety requirements of the “Low voltage” Directive 2006/95/EC;

-Safety requirements of the “EMC” Directive 89/336/EC;

-Requirements of the Directive 93/68/EC.

BEFORE USING FOR THE FIRST TIME

• Read the instructions carefully before installing and using the appliance

• After unpacking the appliance, make sure it is not damaged. In case of doubt, do not

use the appliance and contact your supplier or a qualified engineer.

• Remove all packaging and do not leave the packing material (plastic bags, poly-

styrene,

bands etc ) in easy reach of children as they may cause serious injury. The

packaging materials are recyclable.

• The

appliance should be installed and all the electrical connections made by a quali-

fied engineer in compliance with local regulations in force and following the manufac-

turer’s instructions.

• Do not attempt to modify the technical properties of the appliance, as it may become

dangerous to use.

IMPORTANT SAFEGUARDS & RECOMMENDATIONS

• Do not carry out any cleaning or maintenance without first disconnecting the appliance

from the electrical supply.

• During and after use of the hob, certain parts will become very hot. Do not touch hot

parts.

• After use always ensure that the control knobs are in the

OFF position.

• Keep children away from the hob during use.

• Do

not allow young children or infirm persons to use the appliance without your super-

vision.

• WARNING

When correctly installed, your product meets all safety requirements laid down for this

pe of product category. However special care should be taken around the under-

neath

of the appliance as this area is not designed or intended to be touched and may

contain sharp or rough edges, that may cause injury.

• Fire Risk! Do not leave inflammable materials on the Hob top.

• Make

sure that electrical cords connecting other appliances in the proximity cannot

come in to contact with the Hob top.

• Do not allow heavy or sharp objects to drop on the glass ceramic hob. If the hob is

cracked or damaged , unplug and call the after-sales service.

• Do not scratch the hob with sharp objects. Don’t use the hob as a work surface.

• Before

disposing of an unwanted appliance, it is recommended that it is made inoper-

ative and that all potentially hazardous parts are made harmless.

•

• If the supply cord is damaged, it must be re

placed by a special cord by a qualified

electrical technician in order to avoid a hazard

This appliance is intended for domestic use only, commercial or any other use

may invalidate the warranty and might be dangerous.

Working Principle

magnetic circuit

ceramic glass plate

iron pot

induction coil

Induced currents

ADVICE FOR THE INSTALLER

IMPORTANT

Appliance installation and maintenance must only be carried out by QUALIFIED

TECHNICIANS and in compliance with the local safety standards.

ilure to observe this rule will invalidate the warranty.

This induction hob caters for all kind of cooking, with its electromagnetic

cooking zones, and its micro-computerised controls and multi-functions.

Manufactured with specially imported materials, the induction hob is extremely

user-frie

ndly, durable and safe.

The induction hob comprises a coil, a hotplate made of ferromagnetic material

d a control system. Electrical current generates a powerful magnetic field

through the coil. This produces a large number of vortices which in turn

generate heat which is then transmitted through the cooking zone to the

cooking vessel.

Safety

This hob was specially designed for domestic use. In its constant search to

improve its products, reserves the right to modify any technical, programme

or aesthetic aspects of the appliance at any time.

When a unsuitable size or non-magnetic pan (e.g. aluminium), or some other

small item (e.g. knife, fork, key) has been left on the cooking zone, the

corresponding indicator will appear a " " and the cooking zone will switch

off after 1 minute.

Power level

The heating zones shut down

automatically after

1~3

4~6

7~9

8 hours

4 hours

2 hours

*Warning:

When the pot is removed, the " " appears, and the induction hotplate stop

heating immediately, then switch off after one minute.

1. Protection from over-heating

A sensor monitors the temperature in the cooking zones. When the

temperature exceeds a safe level, the cooking zone is automatically

switched off.

2. Detection of small or non-magnetic items

3. Residual heat warning

When the hob has been operating for some time, The letter “H” appears to

warn you that the cooking zones are hot.

4. Auto shut down

Another safety feature of the induction hob is auto shutdown. This occurs

whenever you forget to switch off a cooking zone.

The default shutdown times are shown in the table below:

Anyone who has been fitted with a heart pacemaker should consult a

doctor before using the induction hob.

inim mc 5

c5 inim m

65 cm

Installation

Figure (1)

Figure (2)

Air intake

Air exit

mini 5 cm

mini 5 mm

mini 2 cm

1. Cut a hole in the worktop of the dimension shown in the diagram below.

A minimum of 50 mm space should be left around the hole. The worktop

should be at least 30 mm thick and made of heat-resistant

material.

As shown in Figure (1)

2. It is essential that the induction hob is well ventilated and that the air intake

and exit are not blocked.

Make sure the hob is correctly installed as shown in Figure(2).

For safety, the gap between the hob and any cupboard above it should be at

least 760 mm.

Warning:

Cautions

Figure (3)

eulb

wolley-neerg

N2 N1 L2 L1

yerg

nworb

kcalb

220-240V

eulb

wolley-neerg

N L2 L1

yerg

nworb

kcalb

400V

220-240V

eulb

wolley-neerg

N L

yerg

nworb

kcalb

220-240V

connet to the main power supply

connet to the main power supply connet to the main power supply

220-240V 2+2N~

220-240V~

400V~ 2-N

3. Fix the hob to the worktop using the four brackets on the base of the hob.

The position of the brackets can be adjusted according to the thickness

of the top.

1.The induction hob must be installed by a properly qualified person.

Never try to install the appliance yourself.

2.The induction hob must not be installed above refrigerators, freezers, dishwashers

or tumble dryers.Install the induction hob away from heat sources such as ovens

or direct sunlight.

3.The induction hob should be installed so that optimum radiation of heat is possible.

4.The wall and the area above the hob should be able to withstand heat.

5.To avoid any damage, the sandwich layer and adhesive should be heat-resistant.

Connection to power supply

The socket should be connected in compliance with the relevant standard, to

a dedicated omnipolar circuit breaker. 30A minimum supply

Proline ProLine IH680P-U User manual

Brand: Proline

Model: ProLine IH680P-U

Category: Hobs

Type: User manual

Download PDF

report

Proline ProLine IH680P-U User manual

Proline ProLine IH680P-U User manual

Related papers

Other documents