Gerber D460056BN is a showerhead that can be attached to a shower arm. It has a ball joint that allows you to adjust the angle of the showerhead. The showerhead has a filter screen and a flow controller that can be removed for cleaning. To remove the filter screen, unscrew it from the ball joint. To remove the flow controller, grasp it with needle-nose pliers and pull it out. To clean the filter screen and flow controller, remove any debris from them. To reinstall the flow controller, press it into the opening of the showerhead.
Gerber D460056BN is a showerhead that can be attached to a shower arm. It has a ball joint that allows you to adjust the angle of the showerhead. The showerhead has a filter screen and a flow controller that can be removed for cleaning. To remove the filter screen, unscrew it from the ball joint. To remove the flow controller, grasp it with needle-nose pliers and pull it out. To clean the filter screen and flow controller, remove any debris from them. To reinstall the flow controller, press it into the opening of the showerhead.
Gerber D460056BN is a showerhead that can be attached to a shower arm. It has a ball joint that allows you to adjust the angle of the showerhead. The showerhead has a filter screen and a flow controller that can be removed for cleaning. To remove the filter screen, unscrew it from the ball joint. To remove the flow controller, grasp it with needle-nose pliers and pull it out. To clean the filter screen and flow controller, remove any debris from them. To reinstall the flow controller, press it into the opening of the showerhead.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI