Braemar Controller XK76 Owner's manual

Category
Split-system air conditioners
Type
Owner's manual

This manual is also suitable for

OWNER’S MANUAL
WIRED CONTROLLER XK76
(English) (XK76)
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
$
i
WIRED CONTROLLER - XK76
IMPORTANT
VERY IMPORTANT
ANY FAILURE TO CARRY
OUT THE REQUIRED MAINTENANCE AND SERVICING, AND ANY
FAILURE TO FILL OUT THE MAINTENANCE SCHEDULE, WILL VERY
LIKELY VOID YOUR WARRANTY.
As with any product that has moving parts or is subject to wear and tear, it is
that you maintain your air conditioner and have it regularly
serviced. Accordingly, it is a condition of warranty cover for your air conditioner
that you comply with all of the maintenance and service requirements set out
in this Manual. Compliance with these requirements will prolong the life of your
air conditioner. Further, it is also a condition of warranty cover that the
Maintenance Schedule in the Manual is filled out (by signing and dating it in
the places indicated) when the item is completed.
(For complete warranty terms, refer to the separate Warranty Booklet sold with
the product. Alternatively, visit
download the terms.
to
Warranty terms are subject to property access and industry safety standards.)
www.seeleyinternational.com/warranty
MAIN COMPONENTS.........................................................................................2
INTRODUCTION & SAFETY ..............................................................................3
OPERATION
WIRED CONTROLLER .................................................................................4
CONTROLLER LAYOUT...............................................................................4
LCD ICONS ................................................................................................5-6
BUTTON FUNCTIONS...............................................................................6-7
ON/OFF .........................................................................................................7
MODE, TEMPERATURE, FAN SETTING .....................................................8
RIGHT, LEFT SWING FUNCTION ................................................................9
UP, DOWN SWING FUNCTION ..................................................................10
TIMER SETTING ....................................................................................11-12
AIR EXCHANGE SETTING....................................................................12-13
SLEEP SETTING ...................................................................................13-15
HEALTH SETTING.................................................................................15-16
I-DEMAND SETTING .............................................................................16-17
VACATION SETTING .............................................................................17-18
TURBO FUNCTION SETTING...............................................................18-19
SAVE FUNCTION SETTING ..................................................................19-21
E-HEATER SETTING .............................................................................21-22
BLOW FUNCTION SETTING.................................................................22-23
FILTER SETTING ...................................................................................23-25
QUIET FUNCTION SETTING......................................................................26
ULTRA-DRY SETTING................................................................................27
LOCK FUNCTION .......................................................................................27
MEMORY FUNCTION .................................................................................27
CENTIGRADE - FAHRENHEIT ...................................................................27
AMBIENT TEMPERATURE ENQUIRY .......................................................27
INDOOR FAN SHUTDOWN MODE ............................................................28
ERROR DISPLAY...................................................................................29-31
MAINTENANCE & SERVICE............................................................................32
MAINTENANCE SCHEDULE ...........................................................................33
OPERATION TIPS.............................................................................................34
TROUBLESHOOTING ......................................................................................35
SEELEY INTERNATIONAL – OWNER’S MANUAL 1
CONTENTS
INTRODUCTION & SAFETY ..............................................................................2
OPERATION
WIRED CONTROLLER .................................................................................3
CONTROLLER LAYOUT...............................................................................3
LCD ICONS ...................................................................................................4
BUTTON FUNCTIONS..................................................................................
ON/OFF .........................................................................................................5
6
MODE, TEMPERATURE...............................................................................
FAN SPEED SETTING..................................................................................
TURBO SETTING..........................................................................................
SWING SETTING..........................................................................................
TIME FORMAT SYSTEM ..............................................................................
CLOCK SETTING.........................................................................................
TIMER SETTING.............................................................................................
ONE TIME CLOCK TIMER..........................................................................
DAILY TIMER..............................................................................................
WEEKLY TIMER.........................................................................................
TWO WEEK TIMER.....................................................................................
COUNT DOWN TIMER................................................................................
LOCK SETTING...........................................................................................
FUNCTION SETTING..................................................................................
FRESH AIR FUNCTION SETTING..............................................................
SLEEP FUNCTION SETTING.....................................................................
HEALTH FUNCTION SETTING...................................................................
I-DEMAND FUNCTION SETTING...............................................................
MAINTENANCE & SERVICE...........................................................................
MAINTENANCE SCHEDULE ..........................................................................
OPERATION TIPS............................................................................................
TROUBLESHOOTING .....................................................................................
CONTENTS
7
8
9
7
9
10
10
11
11
13
12
13
14
15
15
15
15
ABSENCE FUNCTION SETTING ...............................................................
MEMORY FUNCTION SETTING.................................................................
FIXED ANGLE SWING MODE SETTING....................................................
SAVE FUNCTION SETTING.......................................................................
AUXILARY HEATING FUNCTION..............................................................
X-FAN SETTING.........................................................................................
QUIET FUNCTION SETTING......................................................................
FAHRENHEIT TEMPERATURE SETTING.................................................
AIR FUNCTION SETTING...........................................................................
USER STATUS VIEW..................................................................................
16
16
16
16
16
16
17
17
17
17
CURRENT ERROR VIEW...........................................................................
18
ERROR CODES..........................................................................................
18
20
ERROR..............................................................................................................
18
21
22
23
5
i
Compatible Models
KSHV25D1S
KSHV35D1S
KSHV46D1S
KSHV52D1S
KSHV60D1S
KSHV70D1S
KSHV80D1S
KSHV90D1S
MDHV25D1S
MDHV35D1S
MDHV50D1S
MDHV60D1S
MDHV70D1S
MBHV35D1S
MBHV45D1S
MBHV71D1S
SEELEY INTERNATIONAL OWNER’S MANUAL 1
MAIN COMPONENTS.........................................................................................2
INTRODUCTION & SAFETY ..............................................................................3
OPERATION
WIRED CONTROLLER .................................................................................4
CONTROLLER LAYOUT...............................................................................4
LCD ICONS ................................................................................................5-6
BUTTON FUNCTIONS...............................................................................6-7
ON/OFF .........................................................................................................7
MODE, TEMPERATURE, FAN SETTING .....................................................8
RIGHT, LEFT SWING FUNCTION ................................................................9
UP, DOWN SWING FUNCTION ..................................................................10
TIMER SETTING ....................................................................................11-12
AIR EXCHANGE SETTING....................................................................12-13
SLEEP SETTING ...................................................................................13-15
HEALTH SETTING.................................................................................15-16
I-DEMAND SETTING .............................................................................16-17
VACATION SETTING .............................................................................17-18
TURBO FUNCTION SETTING...............................................................18-19
SAVE FUNCTION SETTING ..................................................................19-21
E-HEATER SETTING .............................................................................21-22
BLOW FUNCTION SETTING.................................................................22-23
FILTER SETTING ...................................................................................23-25
QUIET FUNCTION SETTING......................................................................26
ULTRA-DRY SETTING................................................................................27
LOCK FUNCTION .......................................................................................27
MEMORY FUNCTION .................................................................................27
CENTIGRADE - FAHRENHEIT ...................................................................27
AMBIENT TEMPERATURE ENQUIRY .......................................................27
INDOOR FAN SHUTDOWN MODE ............................................................28
ERROR DISPLAY...................................................................................29-31
MAINTENANCE & SERVICE............................................................................32
MAINTENANCE SCHEDULE ...........................................................................33
OPERATION TIPS.............................................................................................34
TROUBLESHOOTING ......................................................................................35
SEELEY INTERNATIONAL – OWNER’S MANUAL 1
CONTENTS
INTRODUCTION & SAFETY ..............................................................................2
OPERATION
WIRED CONTROLLER .................................................................................3
CONTROLLER LAYOUT...............................................................................3
LCD ICONS ...................................................................................................4
BUTTON FUNCTIONS..................................................................................
ON/OFF .........................................................................................................5
6
MODE, TEMPERATURE...............................................................................
FAN SPEED SETTING..................................................................................
TURBO SETTING..........................................................................................
SWING SETTING..........................................................................................
TIME FORMAT SYSTEM ..............................................................................
CLOCK SETTING.........................................................................................
TIMER SETTING.............................................................................................
ONE TIME CLOCK TIMER..........................................................................
DAILY TIMER..............................................................................................
WEEKLY TIMER.........................................................................................
TWO WEEK TIMER.....................................................................................
COUNT DOWN TIMER................................................................................
LOCK SETTING...........................................................................................
FUNCTION SETTING..................................................................................
FRESH AIR FUNCTION SETTING..............................................................
SLEEP FUNCTION SETTING.....................................................................
HEALTH FUNCTION SETTING...................................................................
I-DEMAND FUNCTION SETTING...............................................................
MAINTENANCE & SERVICE...........................................................................
MAINTENANCE SCHEDULE ..........................................................................
OPERATION TIPS............................................................................................
TROUBLESHOOTING .....................................................................................
CONTENTS
7
8
9
7
9
10
10
11
11
13
12
13
14
15
15
15
15
ABSENCE FUNCTION SETTING ...............................................................
MEMORY FUNCTION SETTING.................................................................
FIXED ANGLE SWING MODE SETTING....................................................
SAVE FUNCTION SETTING.......................................................................
AUXILARY HEATING FUNCTION..............................................................
X-FAN SETTING.........................................................................................
QUIET FUNCTION SETTING......................................................................
FAHRENHEIT TEMPERATURE SETTING.................................................
AIR FUNCTION SETTING...........................................................................
USER STATUS VIEW..................................................................................
16
16
16
16
16
16
17
17
17
17
CURRENT ERROR VIEW...........................................................................
18
ERROR CODES..........................................................................................
18
20
ERROR..............................................................................................................
18
21
22
23
5
1
i
WIRED CONTROLLER - XK76
INTRODUCTION & SAFETY
when the Braemar Air Conditioning Unit
is used. Note: the manufacturer
recommends that low level return air grilles
are installed.
IMPORTANT!
THE AUSTRALIAN GREENHOUSE
OFFICE HAS ISSUED VARIOUS
REGULATIONS ON THE USE AND
DISPOSAL OF REFRIGERANTS IN
THE UNIT. FAILURE TO FOLLOW
THESE REGULATIONS MAY HARM
THE ENVIRONMENT AND COULD
LEAD TO THE IMPOSITION OF
SUBSTANTIAL FINES.
WHERE SPECIFIED, ONLY
QUALIFIED AND LICENSED
TECHNICIANS SHOULD PERFORM
WORK ON THIS UNIT, FAILING
WHICH THE WARRANTY ON THE
UNIT WILL BE VOID.
WARNING! This appliance is not
intended for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or lack
of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualied
persons in order to avoid a hazard.
Congratulations on purchasing a new
Braemar Air Conditioner!
Please keep this Manual and the
Warranty Booklet in a safe place,
along with the original purchase
documents, plus all relevant
certicates of compliance relating to
the installation work performed. Please
register the Warranty straight away, by
following the steps set out in the
Warranty Booklet.
The installer must read the Installation
Manual before installing the Braemar
Air Conditioning Unit.
The home owner/user should read the
Owners Manual before operating the
Unit.
To ensure the warranty on the Unit is
continued and valid, the Unit must be
checked and serviced by the home
owner/user as per the requirements in
the Maintenance & Service section
and the Maintenance Schedule. This
will also prolong the life of your air
conditioner.
The home owner/user should regularly
check the Air Inlet side of the Outdoor
unit to ensure grass, leaf and other
matter are not drawn into or onto the
Inlet side of the Outdoor unit. Restriction
to the air ow across the coil will reduce
the system’s capacity, and result in high
operation pressures and excessive
operating costs.
A return air lter MUST be installed by
the installer at the return air grille. The
air lter should be inspected and
cleaned at least every two weeks
2
SEELEY INTERNATIONAL OWNER’S MANUAL 1
Your Braemar Air Conditioner
has been designed and built with reliable,
quality components. To ensure many years
of trouble free, dependable service
please read the following pages very
carefully, and please ensure that you
follow all of the instructions.
WIRED CONTROLLER
Please follow the below cautionary
notes when using the wired controller:-
1. Do not install the wired controller in
a damp place or under direct sunlight.
2. Do not abuse, toss, or frequently
assemble/disassemble the wired
controller.
3. Do not operate the wired controller
with wet hands and never let any liquid
ow into it.
4. Do not install or remove the wired
controller by yourself. If necessary,
please contact a service agent.
5. This wired controller is applicable to
various kinds of air conditioners -
some specic functions unavailable to
the duct type air conditioners will be
covered in this manual.
6. Before operating the air conditioner,
please read this manual carefully and
keep it in a safe place for future
reference.
OPERATION
CONTROLLER LAYOUT
Appearance and LCD Icons
Wired Controller appearance
LCD Icon Layout
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
$
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
$
23 3 10 20 4 12 22 11 15 16 17 18 13 21
2
119 14
3
i
WIRED CONTROLLER - XK76
OPERATION cont.
LCD ICONS
No. Icon Introduction
1 Up and down swing function
2 Left and right swing function
3 Fresh air function
4 Sleep function
5 Auto mode
6 Cooling mode
7 Dry mode
8 Fan mode
9 Heating mode
10 Health Function
11 i-Demand function
12 Absence function
13
Shielding status (Buttons, temperature, ON/OFF,mode or
energy saving is shield by remote monitor)
14 Current set fan speed
15 Memory function
16 DRED function
17 Save function
18 X-fan Function
19 Remind to clean lter
20 Timer on status
21 Gate card pulled-o status or nobody present status
22 Quiet Function
23 Function Lock
$
4
SEELEY INTERNATIONAL OWNER’S MANUAL 1
OPERATION cont.
BUTTON FUNCTION
MENU/OK
SWING
FAN
MODE
ON/OFF
1
4 5 6
7 8 9
2 10 3
No.
Button
Name
Button function
1 FAN
Set low, medium,
high, turbo, auto
2
(1) Set Temperature
(2) Set parameter
(3) Move option
cursor
6
3
ON/OFF/
BACK
(1) Turn on or turn
o unit
(2) Return to last page
4 SWING
Set up & down swing
and set left and right
swing
5
<
(1)Set related function
on or o
(2) Move option
cursor
(3) Set parameter
8
>
7
MENU/
OK
(1) Enter menu page
(2) conrm setting
9 MODE
Set auto, cooling
dry, fan and heating
modes for indoor unit.
10
REMOTE
SENSOR
ON / OFF
Press the ON/OFF Button to turn the unit on or o.
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
C
29
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
5
i
WIRED CONTROLLER - XK76
OPERATION cont.
MODE SETTING
Under the ON state of the unit, press
the MODE button to switch the
operation modes as the sequence
shown below.
TEMPERATURE SETTING
Press or button to increase or
decrease setting temperature when
the unit is on. Pressing either of them
continuously, will increase or
decrease by 1°C every 0.3s.
In Cooling, Dry, Fan and Heating
mode, temperature setting range is
16°C - 30°C.
In Auto mode, the setting temperature
is not adjustable.
TEMPERATURE SETTING cont.
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
Auto Cooling Dry Fan Heating
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
6
SEELEY INTERNATIONAL OWNER’S MANUAL 1
OPERATION cont.
FAN SPEED SETTING
Press the FAN button to vary the
speeds as shown in the sequence
below.
TURBO SETTING
Press FUNCTION button to switch
to “TURBO” function. The TURBO icon
will ash. Press the ENTER/CANCEL
to start function. When the “TURBO”
function is activated the “TURBO” icon
will be displayed.
To deactivate the “TURBO” function
press the FUNCTION button to switch
to “TURBO” function, then press the
ENTER/CANCEL button to deactivate.
NOTE:
1. In DRY mode, fan speed cannot be
adjusted.
2. When the wired controller is
connected with a fresh air unit
fan speed of the indoor unit cannot
be adjusted via FAN button.
3. If the indoor units fan speed is set
the fan speed will automatically adjust
according to the room temperature.
Low Mid-low Mid-highMiddle
High
Auto
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
C
29
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
C
29
7
i
WIRED CONTROLLER - XK76
OPERATION cont.
SWING SETTING
UP AND DOWN
Under the ON state of the unit, press the
swing button to activate swing function.
The swing up and down operation
sequence is shown below.
LEFT AND RIGHT
Press to adjust the LEFT/RIGHT
louvre, each press will toggle between
the below settings:-
closed
Where a single line indicates a xed
position, multiple lines indicate
swinging up/down in the positions
shown.
SWING SETTING cont.
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
After completion the swing setting wil exit
automatically after 5s
closed
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
Press the < or >
button to change
to the left and right
swing function
Press the SWING
button to turn on
or o the left right
swing function.
Press SWING
button to activate
the and swing
function or adjust
the angle of the
louvre
After nishing
setting, the
function will exit
after 5 seconds
8
SEELEY INTERNATIONAL OWNER’S MANUAL 1
OPERATION cont.
TIME FORMAT SYSTEM
The time format can be set to either 12
hour or 24 hour system.
CLOCK SETTING
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
$
MENU/OK
SWING
FAN
MODE
ON/OFF
MENU
LOCK
TIMER
FUNCTION
CLOCK
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
MENU
LOCK
TIMER
FUNCTION
CLOCK
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
CLOCK
CLOCK
MENU
CLOCK FORMAT
12 24
MENU/OK
SWING
FAN
MODE
ON/OFF
SEARCH
CLOCK
CLOCK
MENU
CLOCK FORMAT
12 24
MENU/OK
SWING
FAN
MODE
ON/OFF
TIME : 12 : 05
CLOCK
DATE : 2018/01/21
MENU
Press the MENU
button to enter the
functions setting
When in MENU
page select the
CLOCK icon to
enter clock setting.
use the
< or >
button to select the
CLOCK icon and
press the MENU
to enter the clock
setting
Press the or
button to select
CLOCK, then press
MENU to select the
time setting
Press the
or
button to select
the time format,
then press
< or >
button to select the
12-hour system or
24-hour system
Press
< or >
button to select
settings time setting
items hour, minute,
year month, day.
Press or
button to set the
value and press
MENU button to
save setting.
9
i
WIRED CONTROLLER - XK76
OPERATION cont.
TIMER SETTING
The wired controller is capable of setting 6
types of timers.
1. One time clock timer
2. Daily timer
3. One week timer
4. Two week time
5. Countdown timer ON
6. Countdown timer OFF
ONE TIME CLOCK TIMER
The wired controller can set one time clock
timer. The timer can be set while the unit is
OFF or ON
NOTE:
The timer function will operate once, when
the timer time has been reached the timer
will turn o the unit automatically.
MENU/OK
SWING
FAN
MODE
ON/OFF
TIMER
DAILY
ONCE
WEEKLY
TWO WEEK
TIMER OFF
TIMER ON
MENU
ON
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
MENU/OK
SWING
FAN
MODE
ON/OFF
ONCE
12:46 ON
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
MENU
LOCK
SEARCH
FUNCTION
TIMER
CLOCK
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
TIMER
DAILY
ONCE
WEEKLY
TWO WEEK
TIMER OFF
TIMER ON
MENU
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Press the < or >
button to turn on or
turn o the timer
Select the timer
symbol after
entering the menu
page. Press the
or button to
select the timer
function
Press the MENU
button to enter the
functions setting,
select the ONE
TIME CLOCK
TIMER function.
Press the
< or >
button to turn this
function ON or OFF
Press the MENU
button to enter the
timer time setting
page.
Press the
< or >
button to select
timer hour or minute
and press or
button increases or
decreases the time
interval rapidly.
Press MENU to
conrm
10
SEELEY INTERNATIONAL OWNER’S MANUAL 1
OPERATION cont.
DAILY TIMER
In daily timer function, the timer can be set
in to 8 segments. In each segment you can
set the time when the unit turns ON/OFF
and temperature for COOLING/HEATING.
WEEKLY TIMER
The user can set the everyday timer content
for a week. In each day, 8 segments can be
set for the timer. The unit will execute
corresponding timer settings in a week.
MENU/OK
SWING
FAN
MODE
ON/OFF
TIMER
DAILY
ONCE
WEEKLY
TWO WEEK
TIMER OFF
TIMER ON
MENU
ON
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
MENU/OK
SWING
FAN
MODE
ON/OFF
WEEKLY SCHEDULE
SCH
WEEK MON TUE WED THU FRI SAT
TIME OnOFF COOL HEAT
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
ON
OFF
ON
ON
OFF
07:00
08:00
10:00
11:00
07:00
1 OFF
2 ON
3 ON
4 ON
5 OFF
MENU
SUN
MENU/OK
SWING
FAN
MODE
ON/OFF
DAILY
SCH TIME OnOFF COOL HEAT
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
ON
OFF
ON
ON
OFF
07:00
08:00
10:00
11:00
07:00
1 ON
2 ON
3 ON
4 ON
5 OFF
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
WEEKLY SCHEDULE
SCH
WEEK SUN MON TUE WED THU FRI SAT
TIME OnOFF COOL HEAT
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
ON
OFF
ON
ON
OFF
07:00
08:00
10:00
11:00
07:00
1 OFF
2 ON
3 ON
4 ON
5 OFF
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
WEEKLY SCHEDULE
SCH
WEEK SUN MON TUE WED THU FRI SAT
TIME OnOFF COOL HEAT
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
ON
OFF
ON
ON
OFF
07:00
08:00
10:00
11:00
07:00
1 ON
2 ON
3 ON
4 ON
5 OFF
MENU
Press or
button to adjust the
value. To conrm
press the MENU
button.
Press
< or > button
to select the day to
be set
After entering the
daily timer setting
page press
< or >
button to activate
function.
After entering the
weekly timer setting
page.
Press the MENU
button to enter timer
programming of that
day.
11
i
WIRED CONTROLLER - XK76
OPERATION cont.
WEEKLY TIMER cont.
TWO WEEK TIMER
The user can set the everyday timer content
for two weeks, in each day the eight
segments can be set for each timer. The
unit will execute the timer seeting for two
weeks.
MENU/OK
SWING
FAN
MODE
ON/OFF
WEEKLY SCHEDULE
SCH
WEEK SUN MON TUE WED THU FRI SAT
TIME OnOFF COOL HEAT
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
ON
OFF
ON
ON
OFF
07:00
08:00
10:00
11:00
07:00
1 ON
2 ON
3 ON
4 ON
5 OFF
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
SUN
TIMER
DAILY
WEEKLY
TWO WEEK
TIMER OFF
TIMER ON
MENU
ONCE
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
MENU/OK
SWING
FAN
MODE
ON/OFF
WEEKLY SCHEDULE
SCH
WEEK SUN MON TUE WED THU FRI SAT
TIME OnOFF COOL HEAT
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
ON
OFF
ON
ON
OFF
07:00
08:00
10:00
11:00
07:00
1 ON
2 ON
3 ON
4 ON
5 OFF
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
TWO WEEK TIMER MENU
CURRENT WEEK
FIRST WEEK
TWO WEEKS SCHEDULE
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
WEEKLY SCHEDULE
SCH
WEEK SUN MON TUE WED THU FRI SAT
TIME OnOFF COOL HEAT
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
26˚C
ON
OFF
ON
ON
OFF
07:00
08:00
10:00
11:00
07:00
1 ON
2 ON
3 ON
4 ON
5 OFF
MENU
Press the or
button to adjust the
content
After entering the
two week timer
menu page press
or button
to select the two
week option timer
programming.
Press
< or >
button to select the
item to be set
Press the
< or >
button to select the
day to be set. Press
or button to
adjust the content.
Press MENU button
to enter timer
programming of that
day.
After nishing, press
MENU button to
save timer setting.
The menu will
return back to day
selection.
12
SEELEY INTERNATIONAL OWNER’S MANUAL 1
OPERATION cont.
COUNT DOWN TIMER
Count down timer includes timer OFF/ON
function. The count down timer allows for the
unit to be turned OFF or On after a desired
amount of time. The timer OFF and TIMER
ON function can be set simultaneously.
TIMER ON
TIMER OFF
NOTE:
If timer function is on, the set hours will
decrease as the unit operarion time
increases. In this case the, residual hours
can be viewed after entering timer setting
page.
LOCK SETTING
The lock setting can lock functions, Mode,
temperature, fan speed. After locking the item
cannot be set through the controller buttons.
NOTE:
If the keys are locked, all keys cannot be
operated after returning to the previous
screen.
MENU/OK
SWING
FAN
MODE
ON/OFF
MON
TIMER ON
HOURS ON
MENU
0.5
MENU/OK
SWING
FAN
MODE
ON/OFF
MENU
LOCK
TIMER
FUNCTION
CLOCK
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
MON
TIMER OFF
HOURS OFF
MENU
0.5
MENU/OK
SWING
FAN
MODE
ON/OFF
MODE
SET TEMPERATURE
FAN SPEED
KEY LOCK
LOCK
MENU
ON, OFF
After entering the
timer ON setting
page, press or
button to increase
or decrease timer
by 0.5 hours. Press
menu button to
conrm setting.
Select lock symbol
in menu button
to enter the lock
setting page.
.
After entering timer
o setting page,
press or
button to increase
or decrease the
timer by 0.5 hours.
Press the MENU
button to conrm.
Press or
button to select the
item to be locked
Press the
< or >
button to lock or
unlock.
13
i
WIRED CONTROLLER - XK76
OPERATION cont.
FUNCTIONS SETTING
NOTE:
If the function item can’t be set, the icon will
be display in grey.
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
MENU/OK
SWING
FAN
MODE
ON/OFF
MENU
LOCK
TIMER
SEARCH
CLOCK
MENU
FUNCTION
MENU/OK
SWING
FAN
MODE
ON/OFF
FUNCTION
SLEEP
HEALTH
IDEMAND
HOLIDAY
MEMORY
MENU
FRESH AIR
ON
ON
OFF
ON
OFF
OFF
ON OFF
ON OFF
ON OFF
Press MENU/OK
button on main
page to enter main
menu page.
Press
< or >
or or button to
select the function
setting symbol.
Then press MENU/
OK button
to enter user
function setting
page.
14
SEELEY INTERNATIONAL OWNER’S MANUAL 1
OPERATION cont.
FRESH AIR FUNCTION SETTING
After entering user function page,
press or to select fresh air
function and press < or > button to turn on
or turn o air function. Press MENU
button to adjust the mode of fresh air.
After entering fresh air mode setting,
press or button to adjust the mode in
the range of 1~10. After setting,
press MENU button to save the setting.
The each mode means as follows:
1―The unit continuously runs for 60min,
and fresh air valve runs for 6 min.
2―The unit continuously runs for 60min,
and fresh air valve runs for 12 min.
3―The unit continuously runs for 60min,
and fresh air valve runs for 18 min.
4―The unit continuously runs for 60min,
and fresh air valve runs for 24 min.
5―The unit continuously runs for 60min,
and fresh air valve runs for 30 min.
6―The unit continuously runs for 60min,
and fresh air valve runs for 36 min.
7―The unit continuously runs for 60min,
and fresh air valve runs for 42 min.
8―The unit continuously runs for 60min,
and fresh air valve runs for 48 min.
9―The unit continuously runs for 60min,
and fresh air valve runs for 54 min.
10―The unit continuously runs for 60min,
and fresh air valve always runs.
SLEEP FUNCTION SETTING
After entering user function page, press
or button to select sleep function and
press < or > button to turn on or turn o
sleep function with auto saving.
If this function is turned on, the unit will
operate according to the preset sleep curve
to provide comfortable sleep environment.
NOTE:
- In fan or auto mode, sleep function is not
available.
- Sleep function will be cancelled when
turning o the unit or switching modes.
HEALTH FUNCTION SETTING
After entering user function page,
press or button to select health
function and press < or > button to turn on
or turn o health function with auto saving.
I-DEMAND FUNCTION SETTING
After entering user function page, press
or button to select IDEMAND function
option and press < or > button to turn on or
turn o this function.
NOTE:
- This function is only available in cooling
mode.
- When this function has been set, set
temperature is displayed in SE.
In this case, temperature setting and fan
speed setting are shielded.
- This function will be cancelled when
turning o the unit or switching modes.
- This function and sleep function cannot
be on simultaneously. If I-demand
function is set rstly and then sleep function
is set, I-demand function will be
cancelled while sleep function will be valid,
and vice versa.
15
i
WIRED CONTROLLER - XK76
OPERATION cont.
ABSENCE FUNCTION SETTING
After entering user function page, press
or button to select holiday function
option and press < or > button to turn on or
turn o this function with auto saving.
This function is used to maintain indoor
temperature so that unit can realize fast
heating.
NOTE:
- This function is only available in heating
mode.
- When this function has been set, set
temperature is displayed in 8ºC. In this
case, temperature setting and fan speed
setting are shielded.
- This function will be cancelled when
switching modes.
- This function and sleep function cannot
be on simultaneously. If absence function
is set rstly and then sleep function is set,
absence function will be cancelled while
sleep function will be valid, and vice versa.
MEMORY FUNCTION SETTING
After entering user function page,
press or button to select memory
function and press < or > button to turn on
or turn o memory function with auto
saving.
FIXED-ANGLE SWING MODE SETTING
After entering user function page, press
or button to select lock swing
function option and press < or > button to
turn on or turn o this function with auto
saving.
NOTE:
If xed-angle swing function is not avaliable
for the connected unit, this function will be
cancelled automatically after setting.
SAVE FUNCTION SETTING
After entering user function page, press or
button to select save function
then press < or > button to turn on or turn o
save function. Press MENU button to enter
save function setting page.
After entering save function setting page,
press < or > button to select cooling or
heating limitation temperature. After
selecting cooling or heating limitation
temperature, press or button to adjust
limitation temperature value. After setting,
press MENU button to save the setting.
Note:
When save function has been set, auto mode
cannot be set.
AUXILARY HEATING FUNCTION
SETTING
After entering user function page, press or
button to select auxiliary
heating function and press < or > button to turn
on or turn o this function with auto
saving.
X-FAN FUNCTION SETTING
After entering user function page, press or
button to select dry function
option and press < or > button to turn on or
turn o this function with auto saving.
NOTE:
- This function is only available in cooling
mode and dry mode.
- When this function is on, if the air
conditioner is turned o, the indoor fan will
still operate at low speed for a while to blow
the residual water inside the air duct.
16
SEELEY INTERNATIONAL OWNER’S MANUAL 1
OPERATION cont.
QUIET FUNCTION SETTING
After entering user function page,
press or button to select quiet
function and press < or > button to turn on
or turn o this function with auto saving.
NOTE:
This function is only available in cooling
mode, heating mode and auto mode.
FAHRENHEIT TEMPERATURE SETTING
After entering user function page,
press or button to select Fahrenheit
temperature function and press < or >
button to turn on or turn o this function
with. After closing this function, Celsius
temperature will be displayed.
AIR FUNCTION SETTING
After entering user function page,
press or button to select Air Function
and press < or > button to turn on or turn
o air function. Press MENU button to
adjust the mode of Air Function.
After entering Air Function mode setting,
press or button to adjust the
mode in the range of 1~2. After setting,
press MENU button to save the setting.
NOTE:
1 - Suction
2 - Discharge
UNIT STATUS VIEW
Press MENU button to enter the menu
and select the function symbol to be viewed.
Then press MENU button to enter view
function page. Press or button to select
status view function. Press MENU button to
enter unit status view page. Press BACK
button to return to the last page.
MENU/OK
SWING
FAN
MODE
ON/OFF
MENU
LOCK
TIMERSEARCH
FUNCTION
CLOCK
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
SEARCH
ERROR INFORMATION
MENU
UNIT STATUS
MENU/OK
SWING
FAN
MODE
ON/OFF
UNIT STATUS
OUTDOOR TEMPERATURE
INDOOR TEMPERATURE
MENU RETURN
25°C
25°C
17
i
WIRED CONTROLLER - XK76
ERROR
CURRENT ERROR VIEW
When error occurs in the unit, error symbol
will be displayed on the main page of
wired controller to indicate that the unit
has an error. In this case, you can enter
error view page to view the current error.
CURRENT ERROR VIEW cont.
Press MENU button
to enter the menu
and view.
The error codes will
be displayed on the
screen
Select the search
symbol and press
MENU to enter
Press or
button to select
error information.
MENU/OK
SWING
FAN
MODE
ON/OFF
08:30
10/06/2019 MON
MENU
SET
COOL
AUTO
C
29
ERROR!
MENU/OK
SWING
FAN
MODE
ON/OFF
MENU
LOCK
TIMERSEARCH
FUNCTION
CLOCK
MENU
MENU/OK
SWING
FAN
MODE
ON/OFF
SEARCH
MENU
UNIT STATUS
ERROR INFORMATION
MENU/OK
SWING
FAN
MODE
ON/OFF
ERROR INFORMATION
E6
RETURN
18
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Braemar Controller XK76 Owner's manual

Category
Split-system air conditioners
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI