DreamGEAR Charging Dock for Wii User manual

Charging Dock

Package Contents:

1 - Charging Dock

1 - Pass-thru Power Cable

2 - Rechargeable Battery Packs

PASS-THRU POWER CABLE USE:

1) Connect the Wii AC adapter to the AC recepticle end of the Pass-thru

Cable.

2) Plug mini-USB cord into Charging Dock.

3) Plug power cable to AC recepticle on back of Wii.

SET-UP/CHARGING:

1) Remove the battery lid on your

Wii Remote and remove any

batteries that may be installed.

2) Replace the original battery

lid with one of the included

rechargeable battery packs.

3) With the Charging Dock

properly connected to your

Wii, place one or two remotes

on to the Charging Dock.

Note: make sure you have

installed the included

rechargeable battery packs

into your Wii remotes.

4) Charging will begin automatically.

The RED LED indicates charging,

the BLUE LED indicates the pack

is fully charged.

5) The Charging Dock charges your

Wii remotes even with Wii console

powered OFF.