Philips 22PFL3606 User manual

22PFL3606

Register your product and get support at

www.philips.com/welcome

EN User manual

Page is loading ...

3

English

6 Install channels 28

Automatically install channels 28

Rename channels 28

Hide channels 29

Unhide channels 29

7 Connect devices 30

Back connectors 30

Side connector 32

Connect a computer 32

Use Philips EasyLink 33

8 Product information 35

Supported display resolutions 35

Multimedia 35

Tuner/Reception/Transmission 35

Remote control 35

Power 35

Speakers 35

Supported TV mounts 36

Product specication 36

9 Troubleshooting 37

General TV issues 37

TV channel issues 37

Picture issues 37

Sound issues 38

HDMI connection issues 38

Computer connection issues 38

Contact us 39

10 Index 40

Contents

1 Notice 4

2 Important 6

3 Your TV 9

TV controls 9

Remote control 10

Remote control usage 11

4 Use your TV 12

Switch your TV on 12

Switch your TV to standby 12

Switch your TV off 12

Switch channels 13

Watch connected devices 13

Adjust TV volume 14

5 Use more of your TV 15

Access TV menus 15

Add device to the home menu 15

Rename devices from the home menu 16

Remove devices from the home menu 16

Change picture and sound settings 16

Create and use list of favorite channels 19

Display the TV clock 20

Use timers 21

Lock unsuitable content 21

View Scenea 22

Change language 23

Play photos, music, and videos on

USB storage devices 23

Update the TV software 25

Change TV preferences 26

Start a TV demo 27

Reset the TV to factory settings 27

EN

Notice

2011 Koninklijke Philips Electronics N.V. All

rights reserved.

Speciﬁ cations are subject to change without

notice. Trademarks are the property of

Koninklijke Philips Electronics N.V. or their

respective owners. Philips reserves the right

to change products at any time without being

obliged to adjust earlier supplies accordingly.

The material in this manual is believed

adequate for the intended use of the system.

If the product, or its individual modules or

procedures, are used for purposes other than

those speciﬁ ed herein, conﬁ rmation of their

validity and suitability must be obtained. Philips

warrants that the material itself does not

infringe any United States patents. No further

warranty is expressed or implied.

Philips cannot be held responsible neither for

any errors in the content of this document

nor for any problems as a result of the content

in this document. Errors reported to Philips

will be adapted and published on the Philips

support website as soon as possible.

Pixel characteristics

This LCD product has a high number of

color pixels. Although it has effective pixels of

99.999% or more, black dots or bright points of

light (red, green or blue) may appear constantly

on the screen. This is a structural property of

the display (within common industry standards)

and is not a malfunction.

Terms of warranty

No components are user serviceable. Do not

open or remove covers to the inside of the

product. Repairs may only be done by Philips

Service Centres and ofﬁ cial repair shops. Failure

to do so shall void any warranty, stated or

implied.

Any operation expressly prohibited in

this manual, any adjustments, or assembly

procedures not recommended or authorised in

this manual shall void the warranty.

Compliance with EMF

Koninklijke Philips Electronics N.V. manufactures

and sells many products targeted at consumers,

which, like any electronic apparatus, in

general have the ability to emit and receive

electromagnetic signals.

One of Philips’ leading Business Principles is to

take all necessary health and safety measures

for our products, to comply with all applicable

legal requirements and to stay well within

the Electro Magnetic Field (EMF) standards

applicable at the time of producing the

products.

Philips is committed to develop, produce and

market products that cause no adverse health

effects. Philips conﬁ rms that if its products are

handled properly for their intended use, they

are safe to use according to scientiﬁ c evidence

available today.

Philips plays an active role in the development

of international EMF and safety standards,

enabling Philips to anticipate further

developments in standardisation for early

integration in its products.

Open source software

Philips Electronics Singapore Pte Ltd hereby

offers to deliver, upon request, a copy of the

complete corresponding source code for the

copyrighted open source software packages

used in this product for which such offer is

requested by the respective licenses. This offer

is valid up to three years after product purchase

to anyone in receipt of this information. To

obtain source code, please contact open.

[email protected]. If you prefer not to use

email or if you do not receive conﬁ rmation

receipt within a week after mailing to this

email address, please write in English to “Open

Source Team, Philips Intellectual Property &

Standards, P.O. Box 220, 5600 AE Eindhoven,

The Netherlands”. If you do not receive timely

conﬁ rmation of your letter, please email to the

email address above. The texts of the licenses

and acknowledgements for open source

software used in this product are included on a

separate leaﬂ et.

5

English

Copyright

Kensington and Micro Saver are registered US

trademarks of ACCO World corporation with

issued registrations and pending applications in

other countries throughout the world.

HDMI, and HDMI logo, and High-Denition

Multimedia Interface are trademarks or

registered trademarks of HDMI licensing LLC in

the United States and other countries.

All other registered and unregistered

trademarks are the property of their respective

owners.

EN

6

Risk of short circuit or re!

• Never expose the remote control or

batteries to rain, water or excessive heat.

• Avoid force coming onto power plugs.

Loose power plugs can cause arcing or re.

Risk of injury or damage to the TV!

• Two people are required to lift and carry a

TV that weighs more than 25 kg or 55 lbs.

• When stand mounting the TV, use only the

supplied stand. Secure the stand to the TV

tightly. Place the TV on a at, level surface

that can support the combined weight of

the TV and the stand.

• When wall mounting the TV, use only a

wall mount that can support the weight

of the TV. Secure the wall mount to a wall

that can support the combined weight of

the TV and wall mount. Koninklijke Philips

Electronics N.V. bears no responsibility

for improper wall mounting that results in

accident, injury or damage.

• If you need to store the TV, disassemble

the stand from the TV. Never lie the TV on

its back with the stand installed.

• Before you connect the TV to the power

outlet, ensure that the power voltage

matches the value printed on the back

of the TV. Never connect the TV to the

power outlet if the voltage is different.

• Parts of this product can be made of

glass. Handle with care to avoid injury and

damage.

2 Important

Read and understand all instructions before you

use your TV. If damage is caused by failure to

follow instructions, the warranty does not apply.

Safety

Risk of electric shock or re!

• Never expose the TV to rain or water.

Never place liquid containers, such as

vases, near the TV. If liquids are spilt on or

into the TV, disconnect the TV from the

power outlet immediately. Contact Philips

Consumer Care to have the TV checked

before use.

• Never place the TV, remote control or

batteries near naked ames or other heat

sources, including direct sunlight.

To prevent the spread of re, keep candles

or other ames away from the TV, remote

control and batteries at all times.

• Never insert objects into the ventilation

slots or other openings on the TV.

• When the TV is swiveled ensure that no

strain is exerted on the power cord. Strain

on the power cord can loosen connections

and cause arcing.

• To disconnect the TV from the mains

power, the power plug of the TV must be

disconnected. When disconnecting the

power, always pull the power plug, never

the cord. Ensure that you have full access

to the power plug, power cord and outlet

socket at all times.

EN

7

English

Screen care

• Avoid stationary images as much as

possible. Stationary images are images that

remain on-screen for extended periods of

time. Examples include: on-screen menus,

black bars and time displays. If you must

use stationary images, reduce screen

contrast and brightness to avoid screen

damage.

• Unplug the TV before cleaning.

• Clean the TV and frame with a soft, damp

cloth. Never use substances such as

alcohol, chemicals or household cleaners

on the TV.

• Risk of damage to the TV screen! Never

touch, push, rub or strike the screen with

any object.

• To avoid deformations and color fading,

wipe off water drops as soon as possible.

Temperature and humidity

In rare occasions, depending on temperature

and humidity, minor condensation can occur on

the inside of the glass front. To prevent this, do

not expose the TV to direct sunlight, heat or

extreme humidity. If condensation occurs, it will

disappear spontaneously while the TV is playing

for a few hours. The condensation moisture will

not harm the TV or cause malfunction.

Risk of injury to children!

Follow these precautions to prevent the

TV from toppling over and causing injury to

children:

• Never place the TV on a surface covered

by a cloth or other material that can be

pulled away.

• Ensure that no part of the TV hangs over

the edge of the surface.

• Never place the TV on tall furniture (such

as a bookcase) without anchoring both the

furniture and TV to the wall or a suitable

support.

• Educate children about the dangers of

climbing on furniture to reach the TV.

Risk of swallowing batteries!

• The product/remote control may contain a

coin type battery, which can be swallowed.

Keep the battery out of reach of children

at all times!

Risk of overheating!

• Never install the TV in a conned space.

Always leave a space of at least 4 inches

or 10 cm around the TV for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the TV.

Risk of injury, re or power cord damage!

• Never place the TV or any objects on the

power cord.

• Disconnect the TV from the power outlet

and antenna before lightning storms.

During lightning storms, never touch any

part of the TV, power cord or antenna

cable.

Risk of hearing damage!

• Avoid using earphones or headphones at

high volumes or for prolonged periods of

time.

Low temperatures

• If the TV is transported in temperatures

below 5°C or 41°F, unpack the TV and

wait until the TV temperature matches

room temperature before connecting the

TV to the power outlet.

EN

8

Environmental efforts

Philips continuously focus on lowering the

environmental impact of its innovative

consumer products. We aim our efforts

towards environmental improvements during

manufacturing, reduction of harmful substances,

energy-efcient use, end-of-life instructions and

product recycling.

Disposal of your old product and

batteries

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

When this crossed-out wheeled bin symbol is

attached to a product it means that the product

is covered by the European Directive 2002/96/

EC. Please inform yourself about the local

separate collection system for electrical and

electronic products.

Please act according to your local rules and

do not dispose of your old products with your

normal household waste.

Correct disposal of your old product helps to

prevent potential negative consequences for the

environment and human health.

Your product contains batteries covered by the

European Directive 2006/66/EC, which cannot

be disposed with normal household waste.

Please inform yourself about the local rules

on separate collection of batteries because

correct disposal helps to prevent negative

consequences for the environmental and

human health.

EN

9

English

TV controls

a +/-: Change volume.

b

(Home): Access the home menu.

c P/CH +/-: Change channels.

d

(Power): Switch the TV on or off.

2

1

3

4

2

1

3

4

3 Your TV

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your TV at

www.philips.com/welcome.

EN

10

a (Standby-On)

• Switch the TV on or to standby.

b Play buttons

• Control video or music.

c

FIND

• Access the menu to select a TV

channel list.

d

(Home)

• Access the home menu.

e

CH - / CH + (Previous/Next)

• Switch channels or navigate through

menu pages, tracks, albums, or folders.

f

SOURCE

• Select connected devices.

g

• Mute or restore audio.

h +/-

• Adjust volume.

i 0-9 (Numeric buttons)

• Select channels.

j EXIT

• Exits a menu.

k . (Dot)

• Not in use.

l

OPTIONS

• Access options for the current activity

or selection.

m

• Return to the previous menu or exit

a function.

n OK

• Conrm an entry or selection.

o

(Navigation buttons)

• Navigate through menus and select

items.

p

ADJUST

• Access the menu to adjust settings.

q Color buttons

• Select tasks or options.

Remote control

11

10

1

2

17

16

12

15

14

13

7

4

5

3

6

9

8

EN

11

English

Remote control usage

When you use the remote control, hold it close

to the TV and point it at the remote control

sensor. Make sure that the line-of-sight between

the remote control and TV is not blocked by

furniture, walls or other objects.

~5m

~30˚

EN

12

Switch your TV to standby

• Press (Standby-On) on the remote

control again.

» The remote control sensor on the TV

switches to red.

Switch your TV off

• Press the power switch on the TV again.

» The remote control sensor on the TV

switches off.

» Though the TV consumes very little

power when in standby, energy

continues to be consumed. When not

in use for an extended period of time,

disconnect the TV power cable from

the power outlet or turn off the power

switch.

Note

•

If you cannot locate your remote control and want

to switch on the TV from standby, press P/CH +/- on

the TV.

4 Use your TV

This section helps you perform basic TV

operations.

Switch your TV on

• Press the power switch on the TV.

» There is a short delay before the TV

responds.

If the TV is in standby

• Press (Standby-On) on the remote

control.

EN

13

English

View channel grid

You can view an overview of all available

channels with the channel grid.

1 Press FIND.

» The channel grid appears.

2 To watch a channel, select it, then press

OK.

Watch connected devices

Note

•

Before you select a device as a source, switch the

device on.

Select a device from the source list

1 Press SOURCE.

» The source list appears.

2 Press to select a device.

3 Press OK to conrm your choice.

» The TV switches to the selected

device.

Switch channels

• Press CH+ or CH- on the remote control.

• Press P/CH +/-on the TV.

Other ways to switch channels

• Enter a channel number using the Numeric

buttons.

• Press

(BACK) on the remote control

to return to the previous channel.

Note

•

When you use a favorite list, you can only select those

channels in the list (see ‘Create and use list of favorite

channels’ on page 19).

EN

14

Adjust TV volume

• Press +/- on the remote control.

• Press +/- on the TV.

To mute or unmute sound

• Press to mute the sound.

• Press

again to restore the sound.

EN

15

English

Add device to the home

menu

After you connect a device, add it to the home

menu.

1 Press .

2 Select [Add new device].

3 Follow the onscreen instructions to add

the device to the home menu.

» The device is displayed in the home

menu.

4 To watch the device, switch it on, then

select it in the home menu.

5 You can also select the device with the

source button (see ‘Select a device from

the source list’ on page 13).

5 Use more of

your TV

Access TV menus

Menus help you to install channels, change

picture and sound settings and access other

features.

1 Press .

» The menu screen appears.

1 Select one of the following, then press OK.

• [Watch TV]: If a source other than

antenna is selected, switch back to the

antenna source.

• [Browse USB]: If a USB device

is connected, access the content

browser.

• [Scenea]: Switch on Scenea wallpaper.

• [Add new device]: Add new devices

to the home menu.

• [Setup]: Access menus to change

picture, sound and other settings.

2 Press to exit.

EN

16

Remove devices from the

home menu

If a device is no longer connected to the TV,

remove it from the home menu.

1 Press .

2 Select a device to remove.

3 Press OPTIONS.

4 Select [Remove device], then press OK.

5 Select [Remove], then press OK.

» The selected device is removed from

the home menu.

Change picture and sound

settings

Change picture and sound settings to suit your

preferences. You can apply pre-dened settings

or change settings manually.

Note

•

While you watch TV or external devices, press

ADJUST, then select [Smart picture] or [Smart sound]

for quick access to picture and sound settings.

Use settings assistant

Use the settings assistant to guide you through

the picture and sound settings.

1 Press .

2 Select [Setup] > [Quick picture and

sound settings], then press OK.

3 Select [Continue], then press OK.

» The [Settings assistant] menu appears.

4 Follow the onscreen instructions to choose

your preferred picture settings.

Rename devices from the

home menu

After you add a new device to the home menu,

you can rename it to your preference.

Note

•

The device name can be up to 16 characters long.

1 Press .

2 Select a device to rename.

3 Press OPTIONS.

» The options menu appears.

4 Select [Rename device], then press OK.

5 To display the text input box, press OK.

6 For each character, select a character, then

press OK.

• To select uppercase letters, lowercase

letters, or symbols: In the row below

the space key, select the respective

key, then press OK.

7 When complete, select [Done], then press

OK.

» The text input box closes.

8 In the rename device menu, select [Done],

then press OK.

EN

17

English

• [Digital Crystal Clear]: Fine-tune each

pixel to match surrounding pixels. This

setting produces a brilliant, high-denition

image.

• [Advance sharpness]: Enables

superior picture sharpness.

• [Dynamic contrast]: Enhance contrast.

[Medium] setting is recommended.

• [Dynamic backlight]: Change

brightness of the TV backlight to

match lighting conditions.

• [MPEG artifact reduction]: Smooth

out transitions on digital pictures.

• [Color enhancement]: Make colors

more vivid and improves the details

in bright colors. You can switch this

feature on or off.

• [Gamma]: For selected models.

Change the midtone intensity in

the picture. Black and white are not

affected.

• [PC mode]: If available, when a PC is

connected to the TV, adjust the picture.

• [Picture format]: Change the picture

format.

• [Screen edges]: Change the viewing area.

(when set to maximum, you may see noise

or rough edge of an image).

• [Picture shift]: If available, change the

picture position for all picture formats

except for [4:3], [Unscaled] and [Wide

screen].

Use smart picture

Use smart picture to apply pre-dened picture

settings.

1 Press ADJUST.

2 Select [Smart picture], then press OK.

3 Select one of the following settings, then

press OK.

• [Personal]: Apply your customized

picture settings.

• [Vivid]: Rich and dynamic settings,

ideal for daytime viewing.

• [Football]: Ideal settings for football

matches.

• [Cinema]: Ideal settings for movies.

• [Energy saving]: Settings that conserve

the most energy.

Manually adjust picture settings

1 Press .

2 Select [Setup] > [TV settings] > [Picture],

then press OK.

3 Select one of the following settings, then

press OK.

• [Smart picture]: Access predened smart

picture settings.

• [Reset]: Reset to factory default settings.

• [Contrast]: Adjust the intensity of backlight

areas, while the video contents are kept

unchanged.

• [Brightness]: Adjust the intensity and

details of dark areas.

• [Color]: Adjust color saturation.

• [Tint]: Compensate for color variations.

• [Sharpness]: Adjust sharpness in the image.

• [Noise reduction]: Filter and reduce noise

in an image.

• [Color temp.]: Adjust the color balance in

an image.

• [Custom color temp]: Customize color

temperature setting. (Only available if

[Color temperature] > [Custom] is

selected)

EN

18

[Super zoom]: (Not

for HD and PC mode.)

Remove the black bars on

the side of 4:3 broadcasts.

There is minimal distortion.

[4:3]: Show the classic 4:3

format.

[Unscaled]:For HD and

PC mode only, and in

selected models only. Allow

maximum sharpness. Some

distortion may be present

due to the broadcaster’s

systems. Set your PC

resolution to wide screen

mode for best results.

[Subtitle zoom]: Display 4:3

pictures over the full area

of the screen with subtitles

visible. Part of the top of

the picture is clipped off.

[Movie expand 16:9]: (Not

for HD and PC mode.)

Scale 4:3 format to 16:9.

[Wide screen]: Scale 4:3

format to 16:9.

Change picture format

1 Press ADJUST.

2 Select [Picture format], then press OK.

3 Select a picture format, then press OK.

Summary of picture formats

The following picture settings can be congured.

Note

•

Depending on the format of the picture source, some

picture settings are not available.

EN

19

English

Create and use list of favorite

channels

You can create a list of your preferred TV

channels so that you can nd those channels

easily.

View only the list of favorite channels

1 While you watch TV, press FIND.

» The channel matrix menu is displayed.

2 Press OPTIONS.

3 Select [Select list] > [Favorites], then

press OK.

» Only channels in the favorites list

appear in the channel grid.

Note

•

The favorites channel grid is empty until you add

channels into the favorites list.

View all channels

You can exit the favorites list, and view all

installed channels.

1 While you watch TV, press FIND.

» The channel matrix menu is displayed.

2 Press OPTIONS.

3 Select [Select list] > [All], then press OK.

» All channels are displayed in the

channel grid.

Note

•

All favorite channels are marked by an asterisk, when

you view the channel grid.

Use smart sound

Use smart sound to apply pre-dened sound

settings.

1 Press ADJUST.

2 Select [Smart sound], then press OK.

3 Select one of the following settings, then

press OK.

• [Standard]: Settings that suit most

environments and types of audio.

• [News]: Ideal settings for spoken

audio, such as news.

• [Cinema]: Ideal settings for movies.

• [Sports]: Ideal settings for sports

programs.

Manually adjust sound settings

1 Press .

2 Select [Setup] > [TV settings] > [Sound],

then press OK.

» The [Sound] menu appears.

3 Select one of the following settings, then

press OK.

• [Smart sound]: Access predened

smart sound settings.

• [Reset]: Reset to factory default

settings.

• [Clear sound]: Enhance the sound

clarity.

• [Bass]: Adjust the bass level.

• [Treble]: Adjust the treble level.

• [Surround]: Switch on spatial sound.

• [Auto volume leveling]: Automatically

reduce sudden volume changes, for

example, when switching channels.

• [Balance]: Adjust the balance of the

right and left speakers.

EN

20

Display the TV clock

You can display a clock on the TV screen.

Set the TV clock manually

1 Press .

2 Select [Setup] > [TV settings] >

[Preferences] > [Clock].

3 Select [Time] or [Date], then press OK.

4 Press the Navigation buttons to set the

time or date.

5 Select [Done], then press OK.

6 Press to exit.

Display the TV clock

1 While you watch TV, press OPTIONS.

» The options menu is displayed.

2 Select [Clock].

» The clock is displayed.

3 Press OK.

Note

•

To disable the clock, repeat the procedure.

Manage the favorites list

1 While you watch TV, press FIND.

» The channel matrix menu appears.

2 Press OPTIONS.

3 Select [Select list] > [All], then press OK.

4 Press OPTIONS.

5 Select [Mark as favorite] or [Unmark as

favorite], then press OK.

» The channel is added or removed from

the favorite list.

Note

•

All favorite channels are marked by an asterisk in the

channel grid.

EN

21

English

Lock unsuitable content

You can prevent your children from watching

certain programs or channels by locking the TV

controls.

Set or change code

1 Press .

2 Select [Setup] > [Channel settings] >

[Child lock].

3 Select [Set code] or [Change code].

» The [Set code] / [Change code] menu

appears.

4 Enter your code using the Numeric

buttons.

» Follow the on-screen instructions to

create or change your PIN code.

Tip

•

If you forget your code, enter ‘8888’ to override any

existing codes.

Use timers

You can set timers to switch the TV to standby

at a specied time.

Tip

•

Set the TV clock before you use timers.

Automatically switch the TV to

standby (sleep timer)

Sleep timer switches the TV to standby after a

pre-dened duration.

Tip

•

You can switch off your TV earlier or reset the sleep

timer during the countdown.

1 Press .

2 Select [Setup] > [TV settings] >

[Preferences] > [Sleep timer].

» The [Sleep timer] menu appears.

3 Select a value between zero and 180

minutes.

» If you select zero, the sleep timer

switches off.

4 Press OK to switch on the sleep timer.

» The TV switches to standby after the

specied time.

EN

Page is loading ...

Philips 22PFL3606 User manual

Philips 22PFL3606 User manual

Related papers

Other documents