Mistral MFD4880R User manual

Brand: Mistral

Model: MFD4880R

Type: User manual

CAUTION

1. Read this instruction manual carefully before using the appliance

2. Do not use force to tilt the fan casing up and down when not in operation. It

will cause damage to the oscillation gear

3. If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard

4. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety. Children should be

supervised to ensure that they do not play with the Appliance

5. Check if the power supply matches the specifications mentioned before use

6. Insert the plug to AC mains securely. Do not operate with wet hands or when

the plug is wet

7. This appliance is intended for household use only. Not for commercial use.

8. Do not operate this appliance in dirty, dusty or polluted environments

9. Handle fan blade with care during cleaning

10. Do not operate this appliance with broken or damage fan blade

11. Do not insert finger or other objects into the air outlet grille

12. Do not use outdoors or near windows. Rain drops may cause electrical

hazards

13. If any malfunction or abnormality, please stop using the appliance and

immediately send it to a nearby Authorized Service Centre

14. Do not pull, lift or carry the appliance by its AC cord. In order to avoid

damages to the AC cord, do not pull the cord around sharp corners and edges

15. Do not lean the appliance against walls or curtains or other objects which

might block the air flow

16. Do not install this appliance in locations containing inflammable or explosive

gases. Do not expose it directly to sunlight for a long period of time

1. Never insert fingers, pencils, or any other object through the grille when fan

is running.

2. Disconnect fan when moving from one location to another.

3. Be sure fan is on a stable surface when operating to avoid overturning.

4. DO NOT use fan near window, rain may create electrical hazard.

RULES FOR SAFE OPERATION

Align the column in middle of pedestal with the hole and

revolve for fitting

Revolve the arrows of two rotary knobs about 90°

1.Control panel

2.Display window

3.Body

4.Base

PARTS & ACCESSORIES

Assemble the pedestal and body.

Align three screws with corresponding hole locations

and screw tightly.

Oscillate Key

Speed Key

ON/OFF Key

Timer Key

Mode Key

CLEANING AND MAINTENANCE

1) Unplug the product before cleaning. After the motor is cooled down, use

a cloth to clean the grille and product surface

2) To ensure adequate air circulation to the motor, keep vents at the rear of

the motor free of dust. Do not disassemble the fan to remove dust

3) Do not use vet cloth or pour water on the product when cleaning. Excess

water may enter the motor and cause electric shock

The Fan require little maintenance. Do not try to fix it by yourself. Refer it to

qualified service personnel if service is needed.

4) Do not use any cleaning solvents like : gasoline, thinner or benzene to

clean the fan

5) Do not use the appliances with metal scouring pad as it may scratch the

surface

Instruction for operation at control panel

Press a key on the unit to activate a corresponding function

For instance :

Press to start the fan operation, indicator will lights on

Press “+”, “-“ key to adjust the speeds of fan.

(Mode : Sleeping winds and natural winds function only can be adjusted up to 3rd speed)

Press “ ” Key, through the “+”, “-“ to adjust the preferred duration of timer.

- When the fan is on, press the “ ” key to set timer for the fan to shut down

(range 0.5 – 12 hours)

- In stand-by mode, you can pre-set the fan to start in 0.5-12 hours

Press “ ” Key to switch between Normal Wind, Natural Wind and Sleep

Wind Functions

Press “ ” Key : Press this key after activating the fan to oscillate the fan

6) Do not immerse the appliances in water or other liquid

ON/OFF

Oscillate

Natural wind

Sleep wind

Normal wind

Timer

Display window

Control panel

Model: MFD4880R

Voltage: 220-240V~50Hz

Power: 45W

Speed(RPM): 700-1350

Swing Angle: 120

**All specifications are subject to change without prior notice.

SPECIFICATIONS

1) Unplug the product before cleaning. After the motor is cooled down, use

a cloth to clean the grille and product surface

2) To ensure adequate air circulation to the motor, keep vents at the rear of

the motor free of dust. Do not disassemble the fan to remove dust

3) Do not use vet cloth or pour water on the product when cleaning. Excess

water may enter the motor and cause electric shock

4) Do not use any cleaning solvents like : gasoline, thinner or benzene to

clean the fan

5) Do not use the appliances with metal scouring pad as it may scratch the

surface

6) Do not immerse the appliances in water or other liquid

Distributed by:

KHIND ALLIANCES SDN BHD (811092-W)

No 2, Jalan Astaka U8/82, Seksyen U8,

Bukit Jelutong, 40150 Shah Alam,

Selangor D.E. Malaysia

Tel : 603-7839 2000 Fax : 603- 7845 0300

Careline : 1 800 88 0032

Email : [email protected]

Website : www.mistral.com.my

E-Warranty : www.khindonline.com

Mistral MFD4880R User manual

Mistral MFD4880R User manual

Mistral MFD4880R User manual

Related papers

Other documents