GODIAG GT100 Features
GODIAG GT100 is a brand new ECU connector and
protocol communication testing tool. It will greatly help a
user to connect the ECU module separately for diagnosis,
programming and coding. Also it will tell whether the
diagnostic & programming tool can normally send out
communication signal.
1. Tell whether the diagnostic & programming tool can send out
communication signal.
After connecting the diagnostic & programming tool to the OBD2 port
of GT100, select the car model and function to be performed. Then
you will see on GT100 the protocol indicator light will turn on or flash
(because the diagnostic & programming tool will send out the
communication signal), if the indicator won't turn on, it indicates that
the diagnostic & programming tool has a incorrect connection or the
machine is damaged.
2. Display the status during communication.
After connecting GT100 to the OBD2 port of the vehicle, turn on the
"Power" switch, then you will see the current vehicle battery voltage
displayed on the device. Then to connect the diagnostic & programming
tool which will communicate with the vehicle and the corresponding
protocol indicator light will turn on or flash on the GT100. It is very
helpful for the user to determine what protocol the vehicle module.
3. Quickly communicate with a single ECU on bench by connecting
with the ECU diagnostic / programming tool. [Which allow the engineers
or technicians to complete the job in the office, also keep away the risk of
data loss in other modules when directly testing on the vehicle.
4. Allow connect multiple car ECU modules. [Which will greatly
help the engineers & technicians who need to connect multiple ECUs
when programming a module, for example, key programming is supposed
to connect multiple ECU modules]
5. When you replace the battery of the vehicle, GT100 will assist in
power supply [After the battery is removed, some cars will be
malfunction or lose the immobilizer remote data. If the engineers or
technicians connect the battery to GT100 then to the OBD2 port of
vehicle before replacing the battery, the ECU will be in an electric state.]
6. The OBD2 cable of GT100 is as long as 1.2 meters, which will
solve the problem that the diagnostic tool cable is not long enough or the
vehicle diagnostic port is too narrow to connect. Please connect GT100
first, turn on the power switch and you will see the voltage on the screen
which can tell whether the power supply of the vehicle is normal. [Which
keep away the risk of burning out the diagnostic & programming tool due
to the modified vehicle OBD2 port]
7. After plugging the banana plug to the colored jumper cable,
connect GT100 to the OBD1 diagnostic port of old car / special car, and
meanwhile with the OBD 2-in-1 extension cable connected to the
diagnostic & programming tool, the vehicle will be diagnosed or
programmed perfectly. Because GT100 will convert the OBD1 port or the
special vehicle diagnostic port to the standard OBD2 diagnostic port.
8. GT100 will convert the OBD1 port of special truck to the standard
OBD2 diagnostic port according to the protocol.
9. The BMW-CAS4 adapter testing platform is used to detect
whether the key that is programmed can work perfectly with the CAS4.
/
