CT6 Cadillac User Experience (GMNA-Localizing-U.S./Canada-11292518) -
2018 - crc - 3/1/17
8 INTRODUCTION
begin. Check the list next to the drawn
character if the system announces it
incorrectly. Use the scroll bar up or
down to select the correct one.
Handwriting Recognition has two
main modes:
.
Upper Case: Used for Destination
Entry.
.
Mixed Case: Used for all other
character entry modes.
Touch the globe option from the
alpha-numeric keyboard to open the
Handwriting Recognition display.
Another way is to use the two finger
gesture by swiping to the left on a
keyboard display or in a list view.
The Handwriting Recognition screen
is split into four major zones:
.
Drawing Pad — Draw a character
in the display area. This is where
the drawing can be seen on the
touchpad.
When the first character is
complete, a representation of that
character can be seen, as well as
an audible response. If the
character is correct, the next
character can be started
immediately.
‐ Delete the last entered character
by drawing a line across the
character field.
‐ To create a space, draw a line
from left to right across the
character field.
.
Character Entry Field — This
section is an area across the top of
the display. The Character Entr y
section can look different
depending on which feature is
being used. When finished with
the input, touch and hold using
two fingers to exit character
recognition and confirm the input,
or touch with two fingers to exit
and return to the keyboard.
.
List of Possible Characters —
The best guess character will be at
the top of the list. If character
recognition displays the incorrect
character, look at this list and see
if the desired character is available
to select. Move the highlight up or
down the list using two fingers to
touch the desired character.
Highlighting a character from the
list will replace the incorrect
character with the desired
character. The character is
displayed in the character entr y
section of the display while an
audio response is triggered.
.
Option Settings — This section is
an area on the right side of the
Character Recognition display.
This section will look different
depending if the recognition mode
is upper case or mixed.
Character Recognition Settings
Touch the option settings icon to
display the Character Recognition
Settings menu. Touch an option to
adjust the speed preference.