2. Miele
  3. F2412SF
F2412SF

Miele F2412SF, F2472SF, F2912SF, K2602SF, K2911SF Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Miele F2412SF Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • Can I merge Miele MasterCool units with the KSK 2002 merging kit?
    What is the maximum number of units that can be merged using the KSK 2002 merging kit?
    What is the minimum thickness of the partition wall 'a' when using the KSK 2002 merging kit?
    What is the maximum thickness of the partition wall 'a' when using the KSK 2002 merging kit?
    Is a heating mat required when using the KSK 2002 merging kit?
    What is the power cord type and length for the refrigeration unit?
    Where does the power cord for the refrigeration unit connect?
MasterCool Refrigeration
Side-by-Side Merging Combinations
For SF Models
KSK 2002
8mieleusa.com
Specification Sheets TRS05202019
Shown: F 2471 SF merged to K 2801 SF
Please note: This information is subject to change
The merging kit should be used for side-by-side installation of Miele MasterCool
units.
For side-by-side installation of appliances with a stainless-steal front (SF), a Top-
frame is needed. Please contact Miele to obtain a top-frame in the required width.
The width of the Top-frame corresponds to the total width of the side-by-side
combination.
Page 2 of 12
SPECIFICATIONS
Electrical
Power Cord Direct connection to left-standing appliance
Support
Call Miele (800) 999-1360
Miele Website
8www.mieleusa.com
20/20 Link
82020technologies.com
Side-by-Side Merging Kit
KSK 2002
KSK 2002
Item 38996071USA
Top Frame Piece Guide
Total Merged SF Unit
width
Model # Item #
42” KTF 1042ss 10984920
48” KTF 1048ss 7337440
54” KTF 1054ss 7337430
60” KTF 1060ss 7337420
66” KTF 1066 ss 7337400
72” KTF 1072 ss 7337410
Page 3 of 12
Side-by-Side Merging Kit
KSK 2002
MERGING STYLE
Merged with a partition
PARTITION SPECIFICATIONS
If the partition wall 'a' is narrower than 6 5/16" (16 mm), a
heating mat ① from the merging kit to prevent condensation
from forming and any resulting damage.
Partition Dimension 'a':
Min. Partition Thickness 5/8"
Max. Partition Thickness 6 5/16" (160 mm)
MERGING SPECIFICATIONS
Maximum allowed amount of
units merged
3
Merged together
refrigeration
Page 4 of 12
FOR PROUD INSTALLATION
E- power cord for refrigeration unit- 5 foot- NEMA 5-15
molded plug power cord connects lower left rear of units
•
•
•
•
Merging kit must be used when combining units
KFT1042SS top frame piece must be used when combining
units
All Installations must be done in accordance with local codes
Sides of adjoining cabinets should be lled (ush to frame) to
insure proper t and nish
Product and Cut-out Dimensions
42” Side-by-Side Combination
Page 5 of 12
FOR PROUD INSTALLATION
E- power cord for refrigeration unit- 5 foot- NEMA 5-15
molded plug power cord connects lower left rear of units
•
•
•
•
Merging kit must be used when combining units
KFT1048SS top frame piece must be used when combining
units
All Installations must be done in accordance with local codes
Sides of adjoining cabinets should be lled (ush to frame) to
insure proper t and nish
Product and Cut-out Dimensions
48” Side-by-Side Combination
FOR PROUD INSTALLATION
Page 6 of 12
E- power cord for refrigeration unit- 5 foot- NEMA 5-15
molded plug power cord connects lower left rear of units
•
•
•
•
Merging kit must be used when combining units
KFT1048SS top frame piece must be used when combining
units
All Installations must be done in accordance with local codes
Sides of adjoining cabinets should be lled (ush to frame) to
insure proper t and nish
Product and Cut-out Dimensions
48” Side-by-Side Combination
Page 7 of 12
E- power cord for refrigeration unit- 5 foot- NEMA 5-15
molded plug power cord connects lower left rear of units
•
•
•
•
Merging kit must be used when combining units
KFT1054SS top frame piece must be used when combining
units
All Installations must be done in accordance with local codes
Sides of adjoining cabinets should be lled (ush to frame) to
insure proper t and nish
FOR PROUD INSTALLATION
Product and Cut-out Dimensions
54” Side-by-Side Combination
Page 8 of 12
E- power cord for refrigeration unit- 5 foot- NEMA 5-15
molded plug power cord connects lower left rear of units
•
•
•
•
Merging kit must be used when combining units
KFT1054SS top frame piece must be used when combining
units
All Installations must be done in accordance with local codes
Sides of adjoining cabinets should be lled (ush to frame) to
insure proper t and nish
FOR PROUD INSTALLATION
Product and Cut-out Dimensions
54” Side-by-Side Combination
Page 9 of 12
E- power cord for refrigeration unit- 5 foot- NEMA 5-15
molded plug power cord connects lower left rear of units
•
•
•
•
Merging kit must be used when combining units
KFT1060SS top frame piece must be used when combining
units
All Installations must be done in accordance with local codes
Sides of adjoining cabinets should be lled (ush to frame) to
insure proper t and nish
FOR PROUD INSTALLATION
Product and Cut-out Dimensions
60” Side-by-Side Combination
Page 10 of 12
E- power cord for refrigeration unit- 5 foot- NEMA 5-15
molded plug power cord connects lower left rear of units
•
•
•
•
Merging kit must be used when combining units
KFT1060SS top frame piece must be used when combining
units
All Installations must be done in accordance with local codes
Sides of adjoining cabinets should be lled (ush to frame) to
insure proper t and nish
FOR PROUD INSTALLATION
Product and Cut-out Dimensions
60” Side-by-Side Combination
Page 11 of 12
E- power cord for refrigeration unit- 5 foot- NEMA 5-15
molded plug power cord connects lower left rear of units
•
•
•
•
Merging kit must be used when combining units
KFT1066SS top frame piece must be used when combining
units
All Installations must be done in accordance with local codes
Sides of adjoining cabinets should be lled (ush to frame) to
insure proper t and nish
FOR PROUD INSTALLATION
Product and Cut-out Dimensions
66” Side-by-Side Combination
Page 12 of 12
Specification Sheets TRS05202019
E- power cord for refrigeration unit- 5 foot- NEMA 5-15
molded plug power cord connects lower left rear of units
•
•
•
•
Merging kit must be used when combining units
KFT1072SS top frame piece must be used when combining
units
All Installations must be done in accordance with local codes
Sides of adjoining cabinets should be lled (ush to frame) to
insure proper t and nish
FOR PROUD INSTALLATION
Product and Cut-out Dimensions
72” Side-by-Side Combination
/