Sanyo PLC-XE33 Owner's manual

Multimedia Projector

MODEL PLC-XE33

Owner’s Manual

Network Supported

□ WiredLAN

   100-Base-TX/10-Base-T

RefertotheOwner'sManualsbelowfor

detailsaboutnetworkfunction.

□  NetworkSet-upandOperation

□  PJNetworkManager

Downloaded From projector-manual.com Sanyo Manuals

Features and Design

ThisMultimediaProjectorisdesignedwiththemostadvancedtechnologyforportability,durability,andeaseofuse.

Thisprojectorutilizesbuilt-inmultimediafeatures,apaletteof16.77millioncolors,andmatrixliquidcrystaldisplay

(LCD)technology.

♦ Compact Design

 Thisprojectorisdesignedcompactinsizeandweight.

Itis easy tocarry and installedanywhere you wishto

use.

♦ Simple Computer System Setting

 TheprojectorhastheMulti-scansystemtoconformto

almostallcomputeroutputsignalsquickly(p.28).Upto

UXGAresolutioncanbeaccepted.

♦ Useful Functions for Presentations

 -Thedigital zoom functionallows you tofocuson the

crucialinformationduringapresentation(p.35).

 -Blackboards* can be used as a projection screen.

*TheboardcolorislimitedtoGreen(pp.32,39).

♦ Lamp Control

 Brightness of the projection lamp can be selected

(pp.25,52).

♦ Quick Termination

 TheAC power cord can be unplugged immediately

after turning off the projector without waiting for the

terminationofthecoolingfanrotation(p.20).

♦ Logo Function

 TheLogofunctionallowsyoutocustomizethescreen

logo (pp.46-48).You can capture an image for the

screen logo and use it for the starting-up display or

betweenpresentations.

♦ Multilanguage Menu Display

 Operationmenuisavailablein18languages;English,

German,French,Italian,Spanish,Portuguese,Dutch,

Swedish,Finnish,Polish,Hungarian,Romanian,

Russian,Chinese,Korean,Japanese,Thaiand

Turkish.(p.43)



Note:

 •TheOn-ScreenMenuandfiguresinthismanualmaydifferslightlyfromtheproduct.

 •Thecontentsofthismanualaresubjecttochangewithoutnotice.

♦ Security Function

 The Security function helps you to ensure security

of the projector. With the Key lock function, you can

locktheoperationonthetopcontrolorremotecontrol

(p.53). PIN code lock function prevents unauthorized

useoftheprojector(pp.19,53–54).

♦

Helpful Maintenance Functions

 Lampandfiltermaintenancefunctionsprovidefor

betterandpropermaintenanceoftheprojector.

♦ LAN Network Function

 This projector is loaded with the Wired LAN network

function. You can operate and manage the projector

vianetwork.Fordetails,refertotheowner’smanualof

“NetworkSet-upandOperation.”

♦ Auto Setup Function

 ThisfunctionenablesInputsearch,AutoKeystone

correctionandAutoPCadjustmentbysimplepressing

theAUTOSETUPbuttononthetopcontrol(p.44).

♦ Colorboard Function

 Atthetimeofsimpleprojectiononthecoloredwall,

youcangettheclosecolorimagetothecolorimage

projectedonawhitescreenbyselectingthesimilar

colortothewallcolorfromthepresetfourcolors.

♦ Switchable Interface Terminal

Theprojectorprovidesaswitchableinterfaceterminal.

Youcanusetheterminalascomputerinputormonitor

outputconveniently.(p.49)

♦

Power Management

 The Power management function reduces power

consumptionandmaintainsthelamplife(p.50).

♦ Closed Caption

 Thisisaprintedversionoftheprogramsoundorother

informationdisplayedonthescreen.Youcanturnon

thefeatureandswitchthechannels.(p.51)

Downloaded From projector-manual.com Sanyo Manuals

Table of Contents

Trademarks

Each name of corporations or products in this book is either a registered trademark or a trademark of its respective

corporation.

Features and Design ...................2

Table of Contents

......................3

To the Owner

..........................4

Safety Instructions

.....................5

AirCirculation 6

InstallingtheProjectorinProperPosition 6

MovingtheProjector 6

Compliance...........................7

Part Names and Functions

..............8

Front 8

Back 8

Bottom 8

RearTerminal 9

TopControl 10

RemoteControl 11

RemoteControlBatteryInstallation 12

RemoteControlOperatingRange 12

RemoteControlCode 12

Installation...........................13

PositioningtheProjector 13

AdjustableFoot13

ConnectingtoaComputer 14

ConnectingtoVideoEquipment 15

ConnectingtoComponentVideoandRGB

(Scart)Equipment 16

ConnectingtheACPowerCord 17

Basic Operation ......................18

TurningOntheProjector 18

TurningOfftheProjector 20

HowtoOperatetheOn-ScreenMenu 21

MenuBar 22

ZoomandFocusAdjustment 23

AutoSetupFunction 23

KeystoneCorrection 23

SoundAdjustment 24

RemoteControlOperation 25

Computer Input .....................27

InputSourceSelection

(RGB:Computer1/Computer2) 27

ComputerSystemSelection 28

AutoPCAdjustment 29

ManualPCAdjustment 30

ImageModeSelection 32

ImageAdjustment 33

ScreenSizeAdjustment 34

Video Input ..........................36

InputSourceSelection(Video,S-video) 36

InputSourceSelection

(Component,RGBScart21-pin) 37

VideoSystemSelection 38

ImageModeSelection 39

ImageAdjustment 40

ScreenSizeAdjustment 42

Setting ..............................43

Setting 43

Information ......................... 57

InputSourceInformationDisplay 57

Maintenance and Cleaning .............58

WARNINGindicator 58

CleaningtheFilters 59

ResettingtheFilterCounter 59

AttachingtheLensCap 60

CleaningtheProjectionLens 60

CleaningtheProjectorCabinet 60

LampReplacement 61

Appendix............................63

Troubleshooting 63

MenuTree 67

IndicatorsandProjectorCondition 69

CompatibleComputerSpecifications 70

TechnicalSpecifications 71

OptionalParts 72

PJLinkNotice 73

ConfigurationsofTerminals 74

PINCodeNumberMemo 75

Dimensions 76

Downloaded From projector-manual.com Sanyo Manuals

To the Owner

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE EXCEPT LAMP REPLACEMENT.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

THISSYMBOLINDICATESTHATDANGEROUS

VOLTAGECONSTITUTINGARISKOFELECTRIC

SHOCKISPRESENTWITHINTHISUNIT.

THISSYMBOLINDICATESTHATTHEREARE

IMPORTANTOPERATINGANDMAINTENANCE

INSTRUCTIONSINTHEOWNER'SMANUAL

WITHTHISUNIT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Beforeinstallingandoperatingthisprojector,readthis

manualthoroughly.

Thisprojectorprovidesmanyconvenientfeaturesand

functions.Operatingtheprojectorproperlyenables

youtomanagethosefeaturesandmaintainsitingood

conditionformanyyearstocome.

Improperoperationmayresultinnotonlyshorteningthe

product-life,butalsomalfunctions,firehazard,orother

accidents.

Ifyourprojectorseemstooperateimproperly,readthis

manualagain,checkoperationsandcableconnections

andtrythesolutionsinthe“Troubleshooting”sectionon

pages63-65ofthisbooklet.Iftheproblemstillpersists,

contactthedealerwhereyoupurchasedtheprojectoror

theservicecenter.

Safety Precaution

CAUTION

DO NOT SET THE PROJECTOR IN GREASY, WET, OR

SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT

A BREAKDOWN OR A DISASTER. IF THE PROJECTOR

COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY

BECOME DETERIORATED.

READ AND KEEP THIS OWNER'S MANUAL FOR

LATER USE.

WARNING: ● THIS APPARATUS MUST BE EARTHED.

● TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

–Thisprojectorproducesintenselightfromtheprojection

lens.Donotstaredirectlyintothelens,otherwiseeye

damagecouldresult.Beespeciallycarefulthatchildren

donotstaredirectlyintothebeam.

–Installtheprojectorinaproperposition.Otherwiseitmay

resultinfirehazard.

–Allowingtheproperamountofspaceonthetop,sides,

andrearoftheprojectorcabinetiscriticalforproper

aircirculationandcoolingoftheunit.Thedimension

shownhereindicatetheminimumspacerequired.

Iftheprojectoristobebuiltintoacompartmentor

similarlyenclosed,theseminimumdistancesmustbe

maintained.

–Donotcovertheventilationslotontheprojector.Heat

build-upcanreducetheservicelifeofyourprojector,and

canalsobedangerous.

–Iftheprojectorisunusedforanextendedtime,unplug

theprojectorfromthepoweroutlet.

–Donotprojectthesameimageforalongtime.The

afterimagemayremainontheLCDpanelsbythe

characteristicofpanel.

SIDEandTOP REAR

CAUTION

NotforuseinacomputerroomasdefinedintheStandard

fortheProtectionofElectronicComputer/DataProcessing

Equipment,ANSI/NFPA75.

Nepeutêtreutilisédansunesalled’ordinateurstelle

quedéfiniedanslanormeANSI/NFPA75Standard

forProtectionofElectronicComputer/DataProcessing

Equipment.

0.7’(20cm)

1.5’(50cm) 3’(1m) 3’(1m)

20cm

50cm 1m 1m

The symbol mark and recycling systems described below

applytoEUcountriesanddonotapplytocountriesinother

areasoftheworld.

Yourproductisdesignedandmanufacturedwithhighquality

materials and components which can be recycled and/or

reused.

Thesymbolmarkmeansthatelectricalandelectronic

equipment,batteriesandaccumulators,attheirend-oflife,

shouldbedisposedofseparatelyfromyourhousehold

waste.

Note:

If a chemical symbol is printed beneath the symbol mark,

thischemicalsymbolmeansthatthebatteryoraccumulator

contains a heavy metal at a certain concentration. This will

beindicatedasfollows:Hg:mercury,Cd:cadmium,Pb:lead

IntheEuropeanUnionthereareseparatecollectionsystems

forusedelectricalandelectronicequipment,

batteriesandaccumulators.

Please,disposeofthemcorrectlyatyourlocal

communitywastecollection/recyclingcentre.

Please,helpustoconservetheenvironment

welivein!

Downloaded From projector-manual.com Sanyo Manuals

Safety Instructions

All the safety and operating instructions should be read

beforetheproductisoperated.

Read all of the instructions given here and retain them

forlateruse.UnplugthisprojectorfromACpowersupply

before cleaning. Do not use liquid or aerosol cleaners.

Useadampclothforcleaning.

Follow all warnings and instructions marked on the

projector.

For added protection to the projector during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet. This will

preventdamageduetolightningandpowerlinesurges.

Do not expose this unit to rain or use near water... for

example,inawetbasement,nearaswimmingpool,etc...

Do not use attachments not recommended by the

manufacturerastheymaycausehazards.

Do not place this projector on an unstable cart, stand,

or table. The projector may fall, causing serious injury

to a child or adult, and serious damage to the projector.

Use only with a cart or stand recommended by the

manufacturer, or sold with the projector. Wall or shelf

mounting should follow the manufacturer’s instructions,

and shoul d use a moun t ing ki t a p prov e d b y t he

manufacturers.

An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

andcartcombinationtooverturn.

Slotsandopeningsinthebackandbottomofthecabinet

areprovidedforventilation,toensurereliableoperationof

theequipmentandtoprotectitfromoverheating.

Theopeningsshouldneverbecoveredwithclothorother

materials,andthebottomopeningshouldnotbeblocked

by placing the projector on a bed, sofa, rug, or other

similar surface.This projector should never be placed

nearoroveraradiatororheatregister.

Thisprojectorshouldnotbeplacedinabuilt-ininstallation

suchasabookcaseunlessproperventilationisprovided.

Neverpushobjectsofanykindintothisprojectorthrough

cabinetslotsastheymaytouchdangerousvoltagepoints

or short out parts that could result in a fire or electric

shock.Neverspillliquidofanykindontheprojector.

Do not install the projector near the ventilation duct of

air-conditioningequipment.

This projector should be operated only from the type

of power source indicated on the marking label. If you

arenotsureofthetypeofpowersupplied,consultyour

authorizeddealerorlocalpowercompany.

Donotoverloadwalloutletsandextensioncordsasthis

canresultinfireorelectricshock.Donotallowanything

to rest on the power cord. Do not locate this projector

wherethecordmaybedamagedbypersonswalkingon

it.

Do not attempt to service this projector yourself as

opening or removing Covers may expose you to

dangerousvoltageorotherhazards.Referallservicing

toqualifiedservicepersonnel.

Unplugthisprojectorfromwalloutletandreferservicing

to qualified service personnel under the following

conditions:

a.Whenthepowercordorplugisdamagedorfrayed.

b.Ifliquidhasbeenspilledintotheprojector.

c.Iftheprojectorhasbeenexposedtorainorwater.

d.Iftheprojectordoesnotoperatenormallybyfollowing

the operating instructions.Adjust only those controls

that are covered by the operating instructions as

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualifiedtechniciantorestoretheprojectortonormal

operation.

e.If the projector has beendroppedorthecabinethas

beendamaged.

f.  When the projector exhibits a distinct change in

performance-thisindicatesaneedforservice.

When replacement parts are required, be sure the

servicetechnicianhasusedreplacementpartsspecified

bythemanufacturerthathavethesamecharacteristics

as the original part. Unauthorized substitutions may

resultinfire,electricshock,orinjurytopersons.

Upon completion of any service or repairs to this

projector, ask the service technician to perform routine

safety checks to determinethat the projectoris in safe

operatingcondition.

NOTE FOR CUSTOMERS IN THE US

HgLAMP(S)INSIDETHISPRODUCTCONTAIN

MERCURYANDMUSTBERECYCLEDORDISPOSED

OFACCORDINGTOLOCAL,STATEORFEDERAL

LAWS.

Downloaded From projector-manual.com Sanyo Manuals

Safety Instructions

Openingsinthe cabinetareprovidedfor ventilation.To

ensurereliableoperationoftheproductandtoprotectit

from overheating, these openings must not be blocked

orcovered.



CAUTION

Hotairisexhaustedfromtheexhaustvent.Whenusing

or installing the projector, the following precautions

shouldbetaken.

–Donotputanyflammableobjectorspraycannearthe

projector,hotairisexhaustedfromtheairvents.

–Keeptheexhaustventatleast3’(1m)awayfromany

objects.

–Do not touch a peripheral part of the exhaust vent,

especiallyscrewsandmetallicparts.Theseareaswill

becomehotwhiletheprojectorisbeingused.

–Donotputanythingonthecabinet.Objectsputonthe

cabinetwillnotonlygetdamagedbutalsomaycause

firehazardbyheat.

Cooling fans are provided to cool down the projector.

The fans’ running speed is changed according to the

temperatureinsidetheprojector.

Moving the Projector

Whenmovingtheprojector,replacethelenscapand

retractadjustablefoottopreventdamagetothelensand

cabinet.

Whentheprojectorisnotinuseforanextendedperiod,

putitintoasuitablecase.

Air Circulation

AirIntakeVent

ExhaustVent

(Hotairexhaust)

AirIntakeVent

Donottilttheprojectormorethan30

degreesfromaboveandbelow.

Donotpointtheprojectoruptoprojectan

image.

Donotpointtheprojectordowntoproject

animage.

Donotputtheprojectoroneithersideto

projectanimage.

Install the projector properly. Improper Installation may

reducethelamplifeandcauseafirehazard.

Installing the Projector in Proper Position

Donottilttheprojectormorethan20

degreesfromsidetoside.

20°

30°



CAUTION IN CARRYING OR TRANSPORTING

THE PROJECTOR

–Donotdroporbumptheprojector,otherwisedamages

ormalfunctionsmayresult.

–Whencarryingtheprojector,useasuitablecarryingcase.

–Donottransporttheprojectorbycourieroranyother

transportserviceinanunsuitabletransportcase.This

maycausedamagetotheprojector.Forinformation

abouttransportingtheprojectorbycourieroranyother

transportservice,consultyourdealer.

–Donotputtheprojectorinacasebeforetheprojectoris

cooledenough.

Downloaded From projector-manual.com Sanyo Manuals

Safety Instructions

Compliance

Federal Communications Commission Notice

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If

such changes or modifications should be made, you could be required to stop operation of the equipment.

Model Number : PLC-XE33

Trade Name : Sanyo

Responsible party : SANYO FISHER COMPANY

Address : 21605 Plummer Street, Chatsworth, California 91311

Telephone No. : (818)998-7322

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters

Laboratories (UL) and certified by the Canadian Standard Association (CSA).

AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the

plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable

to insert the plug into the outlet, contact your electrician.

GROUND

AC Power Cord Requirement

AC Power Cord for the United Kingdom:

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin

face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the

same rating, marked thus

A S A

. If the fuse cover is detachable, never use the plug with the cover omitted. If a

replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug

(i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.

If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.

The end of the flexible cord should be suitably prepared and the correct plug fitted.

WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET

OUTLET.

The Wires in this mains lead are coloured in accordance with the following code:

Green-and-yellow Earth

Blue...........Neutral

Brown .........Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings

identifying the terminals in your plug proceed as follows:

The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by

the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or

coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or

coloured red.

WARNING: THIS APPARATUS MUST BE EARTHED.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.

Downloaded From projector-manual.com Sanyo Manuals

Part Names and Functions

⑤

⑦ ⑧

③

②

Front

Back

⑥

①Top controls and Indicators

②Zoom Ring

③Focus Ring

④Speaker

⑤ Infrared Remote Receiver

⑥Projection Lens

⑦Lens Cap

 (Seepage60forattaching.)

⑧Air Intake Vent

⑨Lamp Cover

⑩Terminals and Connectors

⑪LAN Connection Terminal

⑫ Power Cord Connector

⑬ Exhaust Vents

CAUTION

Hotairisexhaustedfromtheexhaustvent.Donotput

heat-sensitiveobjectsnearthisside.

⑭Filters

⑮Adjustable Foot



Note:

⑪

LANConnectionTerminalisfortheNetworkfunction.

Refertotheowner’smanualof“NetworkSet-upand

Operation”.

Kensington Security Slot

ThisslotisforaKensingtonlockusedtodetertheftof

theprojector.



KensingtonisaregisteredtrademarkofACCOBrands

Corporation.



CAUTION

Donotturnonaprojectorwithlenscapattached.High

temperaturefromlightbeammaydamagelenscapand

resultinfirehazard.

④

⑩

⑧

⑪

⑨



Bottom

⑮

①

⑭⑬⑬⑫

⑭

Downloaded From projector-manual.com Sanyo Manuals

Part Names and Functions

Rear Terminal

② ③①

④

⑥

⑦

⑤

⑦ AUDIO IN

 Connecttheaudiooutputsignalfromcomputeror

videoequipmenttothisjack(pp.14-16).

⑤ VIDEO IN

 Connectthecompositevideooutputsignaltothis

jack(p.15).

② COMPUTER IN 1 /S-VIDEO IN / COMPONENT IN

 ConnectanalogRGBoutputsignalfroma

computer,S-VIDEOoutputsignalfromvideo

equipment,orRGBscart21-pinvideooutputor

componentvideooutputtothisterminal(pp.14-16).

④ AUDIO OUT (VARIABLE)

 Connectanexternalaudioamplifiertothisjack

(pp.14-16).

 ThisterminaloutputssoundfromAUDIOIN

terminal.

⑥ LAN Connection Terminal

 ConnecttheLANcable(refertotheowner’s

manualof“NetworkSet-upandOperation”).

① CONTROL PORT

 Whentheprojectoriscontrolledbyacomputer,

connecttothisjackwithserialcontrolcable.

③ COMPUTER IN 2 / MONITOR OUT

 –ConnectanalogRGBoutputsignalfroma

 computertothisterminal(p.14).

 –Thisterminalcanbeusedtooutputtheincoming

 analogRGBandComponentsignalfrom

 COMPUTERIN1/S-VIDEOIN/COMPONENTIN

 terminaltotheothermonitor(pp.14,16).

Downloaded From projector-manual.com Sanyo Manuals

Part Names and Functions

Top Control

⑦ LAMP REPLACE indicator

 Lightsyellowwhentheprojectionlampreachesits

endoflife(pp.61,69).

⑧ WARNING indicator

 –Lightsredwhentheprojectordetectsan

abnormalcondition.

 –Blinksredwhentheinternaltemperatureofthe

projectorexceedstheoperatingrange(pp.58,

69).

④ ON/STAND–BY button

Turntheprojectoronoroff(pp.18-20).

⑤ POWER indicator

 –Lightsredwhentheprojectorisinstand-bymode.

 –Lightsgreenduringoperations.

 –BlinksgreeninthePowermanagementmode

(p.50).

⑥ MENU button

 OpenorclosetheOn-ScreenMenu(p.21).

② POINT

▲▼◄►

(VOLUME +/–) buttons

 –Selectanitemoradjustthevalueinthe

On-ScreenMenu(p.21).

 –PantheimageintheDigitalzoom+/-mode

(p.35).

 –Adjustthevolumelevel(Point◄►buttons)

(p.24).

③ AUTO SETUP button



ExecutethesettingofAutosetup(includesInput

search,AutoPCadj.andAutoKeystonefunctions)

inthesettingmenu.(pp.23,44).

① SELECT button

 –Executetheselecteditem(p.21).

 –ExpandorcompresstheimageintheDigital

zoommode(p.35).

①

②

③

④

⑤

⑥

⑦

⑧

Downloaded From projector-manual.com Sanyo Manuals

Part Names and Functions

Note:

Toensuresafeoperation,pleaseobservethefollowingprecautions:

–Donotbend,drop,orexposetheremotecontroltomoistureorheat.

–Forcleaning,useasoftdrycloth.Donotapplybenzene,thinner,spray,

oranychemicalmaterial.

Remote Control

⑦

⑭

⑩

⑳

④

⑱

②

⑧

⑨

⑬

⑯

⑤

⑥

⑪

⑫

⑲

⑮

③

②AUTO SET button

ExecutethesettingofAutosetup(includesInputsearch,AutoPCadj.

andAutoKeystonefunctions)inthesettingmenu.

(pp.23,44)

⑤ S-VIDEO button

 SelecttheS-VIDEOinputsource.(p.36)

⑥Point ▲▼◄►

buttons

 –SelectanitemoradjustthevalueintheOn-ScreenMenu.(p.21)

 –PantheimageintheDigitalzoom+/-mode.(p.35)

⑬

MUTE button

 Mutethesound.(p.24)

⑦SCREEN button

 Selectascreenmode.(pp.26,34-35,42)

⑮P-TIMER button

 OperatetheP-timerfunction.(p.26)

⑩NO SHOW button

 Temporarilyturnofftheimageonthescreen.(p.26)

⑯LAMP button

 Selectalampmode.(pp.25,52)

⑱KEYSTONE button

 Correctkeystonedistortion.(pp.23,45)

⑲SELECT button

 –Executetheselecteditem.(p.21)

 –ExpandorcompresstheimageinDigitalzoommode.(p.35)

⑧MENU button

 OpenorclosetheOn-ScreenMenu.(p.21)

⑨FREEZE button

 Freezethepictureonthescreen.(p.25)

⑫VOLUME +/- buttons

Adjustthevolumelevel.(p.24)

①ON/STAND-BY button

 Turntheprojectoronoroff.(pp.18-20)

③ COMPUTER 1/2 buttons

 SelecttheCOMPUTER1orCOMPUTER2inputsource.

(pp.27,37)

⑪D.ZOOM ▲▼buttons

 Zoominandouttheimages.(pp.25,35)

⑭ IMAGE button

 Selecttheimagemode.(pp.26,32,39)

⑳COMPONENT button

 SelecttheCOMPONENTinputsource.(p.37)

④ VIDEO button

 SelecttheVIDEOinputsource.(p.36)

⑰

⑰INFO. button

 Operatetheinformationfunction.(p.57)

①

Downloaded From projector-manual.com Sanyo Manuals

Part Names and Functions

Toensuresafeoperation,pleaseobservethefollowingprecautions:

 ● Usetwo(2)AAAorLR03typealkalinebatteries.

 ● Alwaysreplacebatteriesinsets.

 ● Donotuseanewbatterywithausedbattery.

 ● Avoidcontactwithwaterorliquid.

 ● Donotexposetheremotecontroltomoistureorheat.

 ● Donotdroptheremotecontrol.

 ● Ifthebatteryhasleakedontheremotecontrol,carefullywipethecasecleanandinstallnewbatteries.

 ● Riskofanexplosionifbatteryisreplacedbyanincorrecttype.

 ● Disposeofusedbatteriesaccordingtotheinstructionsoryourlocaldisposalruleorguidelines.

Openthebattery

compartmentlid.

Installnewbatteries

intothecompartment.

Replacethe

compartmentlid.

Two AAA size batteries

Forcorrectpolarity

(+and–),besure

batteryterminalsare

incontactwithpinsin

compartment.

1 2 3

Point the remote control toward the projector (Infrared

Remote Receiver) when pressing the buttons. Maximum

operating range for the remote control is about 16.4'(5 m)

and60degreesinfrontoftheprojector.

Remote Control Operating Range

Remote Control Battery Installation

16.4'

(5m)

30°

Remotecontrol

30°

The2 differentremote controlcodes (Code 1–Code2) are

assignedtothisprojector.Switchingtheremote

control codes prevents interference from other remote

controlswhenseveralprojectorsorvideoequipment

nexttoeachother are operatedatthesametime.Change

theremotecontrolcodefortheprojectorfirstbefore

changingthatforthe remote control.See"Remotecontrol"

intheSettingMenuonpage52.

PressandholdtheMENUandIMAGEbuttonsformore

thanfivesecondstoswitchbetweentheCode 1andCode

2.TheinitialcodeissettoCode 1.

Remote Control Code

MENU button

IMAGE button

Downloaded From projector-manual.com Sanyo Manuals

Positioning the Projector

Forprojectorpositioning,seethefiguresbelow.Theprojectorshouldbesetperpendicularlytotheplaneofthe

screen.

Installation

Note:

 •The brightness in the room has a great influence on picture quality. It is recommended to limit ambient

lightinginordertoobtainthebestimage.

 •Allmeasurementsareapproximateandmayvaryfromtheactualsizes.

Adjustable Foot

AdjustableFoot

FootLockLatch

Projectionanglecanbeadjustedupto10.0degreeswith

theadjustablefoot.

Liftthefrontoftheprojectorandpushthefootlock

latchontheprojector.

Releasethefootlocklatchtolocktheadjustablefoot

androtatetheadjustablefoottoadjustthepositionand

tilt.

Toretracttheadjustablefoot,liftthefrontofthe

projectorandpushandundothefootlocklatch.

Keystonedistortionoftheprojectedimagecanbe

correctedbymenuoperation.(seepages23,44-45)

100"

150"

200"

250

167

125

300"(wide)

40"

300"(tele )

38.7'(11.80m)

32.3'(9.84m)

21.5'(6.55m)

16.1'(4.90m)

Max. Zoom Min. Zoom

: B = 6 : 1

(Inch Diagonal)

10.7'(3.26m)

(Center)

4.3'(1.30m)

Screen Size

(W x H) mm

4 : 3 aspect ratio

40”

Zoom (max)

813 x 610

4.3'(1.30m)

100”

2032 x 1524

10.7'(3.26m)

150”

3048 x 2286

16.1'(4.90m)

200”

4064 x 3048

21.5'(6.55m)

300”

6096 x 4572

32.3'(9.84m)

Zoom (min)

5.1'(1.55m) 12.9'(3.92m) 19.4'(5.90m) 25.8(7.87m)38.7'(11.80m)

Downloaded From projector-manual.com Sanyo Manuals

Installation

Connecting to a Computer

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting

cables.

Cables used for connection

• VGA Cables (Mini D-sub 15 pin) *(Only one cable is supplied.)

• Audio Cables

(*One cable is supplied; other cables are not supplied with the projector.)

Note:

• Input sound to the AUDIO IN terminal when using the COMPUTER IN 1/ S-VIDEO IN / COMPONENT IN

and the COMPUTER IN 2/MONITOR OUT terminals as input.

• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.

• When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN /COMPONENT IN and

not the COMPUTER IN 2/MONITOR OUT.

External Audio Equipment

Audio cable

(stereo)

Audio cable

(stereo)

Audio Output

AUDIO IN

AUDIO OUT

(stereo)

Audio Input

Monitor Input

Monitor Output

COMPUTER IN 2 /

MONITOR OUT

VGA

cable

COMPUTER IN 1

/ S-VIDEO IN

/COMPONENT IN

VGA

cable

Monitor

Output

This terminal is switchable.

Set up the terminal as

either Computer input or

Monitor output. (See Page

49.)

Downloaded From projector-manual.com Sanyo Manuals

Installation

Connecting to Video Equipment

Cables used for connection

• Video Cable

• S-Video Cable

• S-Video-VGA Cable

• Audio Cables (Mini Plug: stereo)

(Cables are not supplied with the projector. )

External Audio Equipment

Audio cable

(stereo)

S-Video cable

Composite Video and Audio Output

S-Video Output

Audio Input

AUDIO IN

Note:

• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.

• See page 72 for ordering optional cables.

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting

cables.

S-Video-VGA

cable

Video cable

COMPUTER IN 1

/ S-VIDEO IN

/COMPONENT IN

AUDIO OUT

(stereo)

VIDEO IN

Audio cable

(stereo)

Audio Output

Downloaded From projector-manual.com Sanyo Manuals

Installation

Connecting to Component Video and RGB ( Scart) Equipment

Note:

 •WhentheAUDIOOUTisplugged-in,theprojector'sbuilt-inspeakerisnotavailable.

 •Seepage72fororderingoptionalcables.

Cables used for connection

•AudioCables(MiniPlug:stereo)

•Scart-VGACable

•ComponentCable

•Component-VGACable

(Cablesarenotsuppliedwiththisprojector.)

ExternalAudioEquipment

AUDIOIN

Audiocable

(stereo)

Audiocable

(stereo)

AudioInput

ComponentVideoOutput

(Y,Pb/Cb,Pr/Cr)

AudioOutput

RGBScart

21-pinOutput

Scart-VGA

cable

Component-

VGAcable

AUDIO OUT

(stereo)

Component

cable

COMPUTERIN1/S-VIDEOIN/COMPONENTIN

UnplugthepowercordsofboththeprojectorandexternalequipmentfromtheACoutletbeforeconnecting

cables.

Downloaded From projector-manual.com Sanyo Manuals

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-120 Vor

200–240VACanditautomaticallyselectsthecorrectinput

voltage. It is designed to work with single-phase power

systems having a grounded neutral conductor. To reduce

theriskofelectricalshock,donotplugintoanyothertypeof

powersystem.

If you are not sure of the type of power being supplied,

consultyourauthorizeddealerorservicestation.

Connect the projector with all peripheral equipment before

turningtheprojectoron.

Note:

UnplugtheACpowercordwhentheprojectorisnot

inuse.Whenthisprojectorisconnectedtoanoutlet

withtheACpowercord,itisinStand-bymodeand

consumesalittleelectricpower.

TotheACoutlet.

(200 - 240 V AC)

NOTE ON THE POWER CORD

ACpowercordmustmeetrequirementofthecountrywhereyouusetheprojector.

ConfirmtheACplugtypewiththechartbelowandproperACpowercordmustbeused.

IfsuppliedACpowercorddoesnotmatchyourACoutlet,contactyoursalesdealer.

Topowercord

connectoronyour

projector.

Projector side

AC outlet side

Ground

TotheACoutlet.

(120 V AC)

For the U.S.A. and Canada

TotheACoutlet.

(200 - 240 V AC)

For the U.K.For Continental Europe



CAUTION

TheACoutletmustbenearthisequipmentandmustbe

easilyaccessible.

Connect the AC power cord (supplied) to the

projector.

Downloaded From projector-manual.com Sanyo Manuals

Thepreparationdisplaywilldisappear

after30seconds.

(Seepage52forLampcontrolstatus.)

Turning On the Projector

Connecttheprojector’sACpowercordintoanAC

outlet.ThePOWERindicatorlightsred.Openthelens

cap(seepages8,60).

PresstheON/SYAND-BYbuttononthetopcontrolor

ontheremotecontrol.ThePOWERindicatorlights

greenandthecoolingfansstarttooperate.The

preparationdisplayappearsonthescreenandthe

countdownstarts.

Completeperipheralconnections(withacomputer,

VCR,etc.)beforeturningontheprojector.

Selected Input Source and Lamp Control

Note:

 TheFilterwarningandLampreplacement

iconsmayappearonthescreen

dependingontheusagestateofthe

projector.

Basic Operation

Lampcontrolstatus

Video

Afterthecountdown,theinputsourcethatwasselected

thelasttimeandthelampcontrolstatusicon(seepage

52)appearonthescreen.

Note:

 •WhentheLogoselectfunctionissettoOff,thelogowill

notbeshownonthescreen(p.46).

 •WhenCountdown offorOffisselectedintheDisplay

function, the preparation display will not be shown on

thescreen(p.45).

 •WhentheInputSearchfunctionissettoOn2,theinput

signalwillbesearchedautomatically(p.44).

• WhenOffisselectedintheDisplayfunction,theVideo/

PC selection window and the input signal guidance

windowarenotshownonthescreen.(p.45)

Ifthereisnosignalinputwhenstartontheprojector,

orthecurrentsignalismissedwhileoperatingthe

projector,theVideo/PCselectionwindowwillbe

displayedonthescreen,pleasemovethepointerto

inputsourcedesiredbypressingthePoint▲▼buttons

andpresstheSELECTbutton.Andthenfollowthe

inputsignalguidancewindowtocorrectthesignaland

connection.

IftheprojectorislockedwithaPINcode,PINcodeinput

dialogboxwillappear.EnterthePINcodeasinstructed

onthenextpage.

Video / PC selection window

Input signal guidance window

Video / PC selection window

Input signal guidance window

Project Video

Project Computer

Cancel

Project Video

Project Computer

Cancel

Project Computer

Nosignal

CurrentInputsetting:Video

Is signal processed correctly?

Is cable connected properly?

Nosignal

CurrentInputsetting:RGB

Is signal processed correctly?

Is cable connected properly?

Downloaded From projector-manual.com Sanyo Manuals

What is PIN code?

PIN(PersonalIdentificationNumber)codeisasecurity

codethatallowsthepersonwhoknowsittooperatethe

projector.SettingaPINcodepreventsunauthorizeduseof

theprojector.

APINcodeconsistsofafour-digitnumber.RefertothePIN

codelockfunctionintheSettingMenuonpages53-54for

lockingoperationoftheprojectorwithyourPINcode.

Enter a PIN code

UsethePoint▲▼buttonstoenteranumber.Pressthe

Point◄►buttonstofixthenumberandmovethered

framepointertothenextbox.Thenumberchangesto“”.

Ifyoufixedanincorrectnumber,usethePoint◄►buttons

tomovethepointertothenumberyouwanttocorrect,and

thenenterthecorrectnumber.

Repeatthissteptocompleteenteringafour-digitnumber.

Afterenteringthefour-digitnumber,movethepointertoSet.

PresstheSELECTbuttonsothatyoucanstarttooperate

theprojector.

IfyouenteredanincorrectPINcode,PIN codeandthe

number()willturnredforamoment.Enterthe

correctPINcodealloveragain.

CAUTION ON HANDLING PIN CODE

IfyouforgetyourPINcode,theprojectorcanno

longerbestarted.Takeaspecialcareinsetting

anewPINcode;writedownthenumberina

columnonpage75ofthismanualandkeepit

onhand.ShouldthePINcodebemissingor

forgotten,consultyourdealerorservicecenter.

AftertheOKicondisappears,

youcanoperatetheprojector.

PIN Code Input Dialog Box

Note:

 •IfthePINcodenumberisnotenteredwithinthree

minutesafterthePINcodedialogboxappeared,the

projectorwillbeturnedoffautomatically.

 •The“1234”issetastheinitialPINcodeatthefactory.

Basic Operation

Downloaded From projector-manual.com Sanyo Manuals

TOMAINTAINTHELIFEOFTHELAMP,ONCE

YOUTURNTHEPROJECTORON,WAITAT

LEASTFIVEMINUTESBEFORETURNINGIT

OFF.

Power off?disappearsafter4seconds.

Turning Off the Projector

Press the ON/STAND-BYbutton on the top control or

ontheremotecontrol,andPower off? appearsonthe

screen.

Press the ON/STAND-BY button again to turn off the

projector.ThePOWERindicatorstartstoblinkred,and

thecoolingfanskeeprunning.(Youcanselectthelevel

offans’quietnessandspeed.See“Fan”on page 55.)

Atthistime,youcanunplugtheACpowercordevenif

thefansarestillrunning.

When the projector has cooled down enough, the

POWER indicator stops blinking and you can turn on

theprojector.

Note:

 •WhentheOnstartfunctionissettoOn,theprojectorwill

beturnedonautomaticallybyconnectingtheACpower

cordtoanACoutlet(p.50).

 •Therunningspeedofcoolingfansischangedaccording

tothetemperatureinsidetheprojector.

 •Donotputtheprojectorinacasebeforetheprojectoris

cooledenough.

 •IftheWARNINGindicatorblinksorlightsred,see

“WARNINGindicator”onpage58.

 •WhilethePOWERindicatorisblinking,thelampisbeing

cooleddownandtheprojectorcannotbeturnedon.Wait

untilthePOWERindicatorstopsblinkingtoturnonthe

projectoragain.

•The fan rotation will terminate directly if theAC power

cord is unplugged immediately after the projector is

turnedoff.

•The projector can be turned on after the POWER

indicator turns red. The waiting time to restart will be

shortenedwhenthenormalpower-offprocessingforfan

  cooling is completed, compared with the time theAC

power cord is immediately unplugged after the power-

off.

Basic Operation

DONOTOPERATETHEPROJECTOR

CONTINUOUSLYWITHOUTREST.

CONTINUOUSUSEMAYRESULTIN

SHORTENINGTHELAMPLIFE.TURNOFFTHE

PROJECTORANDLETSTANDFORABOUTAN

HOURINEVERY24HOURS.

Downloaded From projector-manual.com Sanyo Manuals

Page is loading ...

Sanyo PLC-XE33 Owner's manual

Related papers

Other documents