Cabletron Systems HubSTACK SEHI-34 Addendum

Type
Addendum

This manual is also suitable for

PN 9031645
SEHI COM PORT PINOUT ADDENDUM
This addendum updates the COM Port pinout diagram (Figure 2-8) on page 2-16 of the
SEHI-22/24/32/34 10 BASE-T Intelligent
Stackable Hub Users Guide.
Use this addendum in conjunction with Chapter 6,
Local Management,
to set up and access SEHI
Local Management.
Getting Help
If you have questions, or need additional help, contact Cabletron Systems Technical Support by:
Phone (603) 332-9400
Monday-Friday; 8am - 8pm Eastern Time
CompuServe
®
GO CTRON from any ! Prompt
Internet mail [email protected]
© Copyright August 1995 by: Cabletron Systems, Inc., P.O. Box 5005, Rochester, NH 03866-5005
All Rights Reserved
Printed in the United States of America
Order Number: 9031645
SEHI
is a trademark of Cabletron Systems, Inc.
CompuServe
is a registered trademark of CompuServe
The information in this document is proprietary and is not to be copied in any form, or by any means, without the written consent
of Cabletron Systems.
1. Transmit Data
2. Data Carrier Detect
3. Data Set Ready
4. Receive Data
5. Signal Ground
6. Data Terminal Ready
7. Request To Send
8. Clear To Send
1 2 3 4 5 6 7 8
COM
  • Page 1 1

Cabletron Systems HubSTACK SEHI-34 Addendum

Type
Addendum
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI