Page is loading ...
iSkin fuze 360
Install Guide
Prepare the iPhone
Step 1
Clean the iPhone 5 to remove dust,
smears and lint using the included
LCD wipe and microber cloth.
Installing the ProTouch® Titan Film
Step 1
Gently lift and peel tab A
to remove the protective
layer and dispose.
Do not touch the exposed
area of the lm after removing the A tab.
!
Step 2
With the A side facing down towards
the screen, align the lm over iPhone 5’s
screen as shown.
Step 3
Release the lm onto the screen’s
surface and smooth out any air
bubbles that may have formed.
Step 4
Gently lift and peel tab B
to remove the protective
layer and dispose.
Installing the fuze 360
Step 4
Release the lm onto the screen’s
surface and smooth out any bubbles.
Step 1
Place the iPhone 5 into the back portion
of the fuze 360 starting with it’s left side.
Step 2
Snap the rest of the iPhone 5
into the fuze 360 case.
Step 3
Attach the top portion of the fuze 360
by rst aligning the puzzle piece at the
top as shown.
Step 4
Snap all corners of the case to secure
the top portion to the iPhone 5.
Step 5
Ensure the Lightning Port protector
is secured.
How to Remove
Step 1
Gently pry apart by lifting the top
portion from silence switch opening.
Step 2
Gently unsnap the top portion
and fully separate. Remove the iPhone from
the bottom portion of the fuze 360.
/