Furuno GP170D User guide

Furuno
Brand
Furuno
Model
GP170D
Type
User guide

This manual is also suitable for

The purpose of this guide is to provide the
basic operation for this equipment. For more
detailed information, see the Operator's Manual.
All brand and product names are trademarks,
registered trademarks or service marks of their
respective holders.
GPS NAVIGATOR
English
GP-170
Operator's Guide
Model
How to adjust the brilliance of the display and panel
Display brilliance
Panel brilliance
How to operate the main menu
then
~
then
If needed, repeat one of these steps.
NU/CU
ENT
DISPLAY
1
8
CENTER
NU/CU
ENT
9
ZOOM
OUT
MENU
ESC
MENU
ESC
BRILL
NU/CU
ENT
NU: North up
CU: Course up
How to open the context menu
For example, context menu for a mark.
Select a mark with the cursorpad.
How to switch the
operation mode
MENU
ESC
Mark List Route List Station List
How to open the list
How to turn the
power on/off
Select the menu item.
Goes forward to one
layer in multi-layer menu.
Shifts display or cursor.
Goes back
one layer in
multi-layer
menu.
OR
Press appropriate numeric key.
OR
~
LIST
LIST
LIST
0
CURSOR
ON/OFF
(Requires internal beacon receiver.)
(numeric key)
PUB. NO. OSE-44820-A
(1406, YOTA) GP-170
00017791110
ACK
DELETE
- Acknowledges an unacknowledged alert.
- Deletes all setting values on the setting window.
- Deletes registered data at the cursor-selected position.
Cursor on: Large Cursor on: Small
0
CURSOR
ON/OFF
9
ZOOM
OUT
0
CURSOR
ON/OFF
- Selects and confirms the menu item.
- Enters a numeric character.
to
: Select the display mode.
DISPLAY
1
ROUTE
2
Long press
: Create a new route.
ROUTE
2
Select the location for a route point.
NU/CU
ENT
ROUTE
2
Repeat these steps to complete the route.
: Set a destination.
GO TO
3
Select the location
for a destination.
GO TO
3
: Set MOB as destination.
MOB
4
MOB
4
Select [1 Yes].
: Put a mark.
MARK
EVENT
5
With cursor on
Select the location for a mark.
MARK
EVENT
5
With cursor off
MARK
EVENT
5
The mark is put at own ship’s position.
: Plot and record ship’s track.
PLOT
ON/OFF
6
PLOT
ON/OFF
6
The pop-up message “Resuming
Track Plot” appears.
PLOT
ON/OFF
6
The pop-up message “Stopping
Track Plot” appears.
To stop plotting,
: Turn the cursor on/off.
0
CURSOR
ON/OFF
: Zoom in/out the display.
7
ZOOM
IN
9
ZOOM
OUT
7
ZOOM
IN
9
ZOOM
OUT
Zoom in Zoom out
: Center the cursor position or own ship’s position.
8
CENTER
8
CENTER
With cursor on
With cursor off
Center the cursor position.
Center own ship’s position.
DISPLAY
1
DISPLAY
1
DISPLAY
1
DISPLAY
1
DISPLAY
1
Integrity
Highway
Data
Course
(Size selectable from menu.)
Plotter
  • Page 1 1
  • Page 2 2

Furuno GP170D User guide

Furuno
Brand
Furuno
Model
GP170D
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents