ELECTRICAL CHICKEN ROTISSERIE
Kasap Tip Dik Buzdolapları
A3 TRANSPORTATION
*This appliance can not be moved by hand from area to area.It must be moved on pallet with
forklift truck.
A4 UNPACKING
*Please unpack the package according to the security codes and ordinances of current
country and get rid from the pack.Parts which contacts with food are produced by stainless
steel.All plastic parts are marked by material’s symbol.
*Please check that all the parts of appliance had come completely and if they are damaged or
not during the shipping.
B INSTALLATION
*Please place the product to straight and sturdy ground,please take necessary steps against
possibility of overturn.
*Technician who will serve for installation and service for the appliance must be professional
on this subject and must have installation and service licenses by the company.
*Connection to Electric Power Supply must be done by authorized person.
*Please be sure that the voltage connected to appliance must be equal with the voltage which
is on appliance’s label.
This appliance must be connected to an earthed outlet in accordance with safety rules
and standard.
*Appliance’s earthing must be connected to earthing line on panel which is nearest to
electric installation.
*Connection to the main fuse and leak current fuse must be done in accordance with the
current regulations.
*The rotisserie is equipped with at least one infrared burner and may have up to eight.
Each burner has three linear resistors, arranged in a parallel configuration over the width of
the roasting chamber. The electric equipment of the rotisserie is supplied by three-phase 380
VAC, 50 Hz power set by the companies which produce in accordance with legal regulations and
the power conditions. The rotisserie contains a neutral wire and an earthing connection. Power is
supplied through a terminal box located at the rear of the appliance. (figure 10)