2. Balt
  3. 27650

Balt 27650 Operating instructions

  • Hello! I've reviewed the assembly instructions for the Elevation Mobile TV Stand, including models 27650, 27624, and 27648. I understand the process involves attaching the mount to the frame, securing the back panel, and other steps to get your TV stand ready. I am here to help with any questions you might have about the assembly process or the features of the stand.
  • What is the first step in the instructions?
    How do I connect the mount to the frame?
    How do I secure the two assemblies together?
1
27650
Elevation Mobile TV Stand
Assembly Instructions
2
Part Drawing Description Qty Part Drawing Description Qty
27650 Elevation Mobile TV Stand
P-1 # 27624 1 EA
P-2 # 27648 1 EA
3
1.) Loosen the six Back Panel Screws (H) from Step #5
of the Elevation Mobile Stand (#27624) assembly
instructions. See Illustration # 1. You may want to
remove the Back Panel to make wiring
easier or leave it in place for
wire security.
2.) Take the assembly from the end of Step #5 of the all Mount (#27648)
and hook the four mount tabs that are on the back frame into the top four brackets that the
Back Panel of # 27624 are hooked into. See Illustration # 2.
3.) Retighten the four top Back Panel Screws (H) to
secure the two assemblies together.
Illustration # 1
27650_10-23-14
# 27624
Assembly
H
Illustration # 2
# 27648
Assembly
# 27624
Assembly
H
Illustration # 3
Back Panel
Optional
/