EOBDTOOL BM2 User manual

The product is used to monitor the car battery,

starting system and charging system. After being

installed on the battery, the mobile phone can

monitor the starting status and charging status of

the battery in real time through the Bluetooth 4.0

connection.

The maximum signal distance without blocking is 10

meters. If exceed 10 meters or block exists, it will

affect the signal strength.

Install red connector to positive pole and black

to negative pole, then firm them.(Fig 1)

(Builtin short circuit prevention safety switch, it will automatically cut

off power when current is too large. Also reverse connection

protection builtin,will not damage vehicle and product in case of

reverse polarity.)

1. App-connected product application distance:

2. How to Install the Product

Turn on the Bluetooth of mobile ,Run App.

3. App Operation

Click " " in the upper left corner and select

Bateery Asst to connect.(Fig 3)

Scan the QR code of the product. (Fig 2)

Search Vgate Asst on App Store or Google Play

to download app.

(Fig 1)

(Fig 2) (Fig 3)