2. Owens Products
  3. TJ15010

Owens Products TJ15010 Installation guide

  • Hello! I've reviewed the instructions for the Owens Products Storage Drawer TJ15010. This document details how to install the drawer under your vehicle’s seat using a ratchet and 13mm socket. I'm ready to answer your questions about the installation process or any other aspect of the product based on the provided instructions.
  • What tools are required for installation?
    What is the torque specification for the bolts?
    What size socket is used for the 8mm bolts?
Under Seat Storage Drawer
IN 688
Owens Products Inc. 1107 Progress Street Sturgis, MI 49091 269-651-2300 Toll-Free:800-726-9367 
Fax: 800-942-9877 www.owensproducts.com sales@owensproducts.com
Product No. TJ15010
Page 1
Tools Required
 Ratchet
 13mm Socket
Torque Specification:
8mm Bolt - 13 Ft Lbs.
Slide drivers seat back to access the front seat bolts.
Remove the front bolts with a 13mm socket on ratchet.
With both front bolts removed slide the drawer unit under seat base so that the tabs with slots of
the drawer are under the driver seat front, then replace the two 8mm bolts removed earlier.
Tighten the bolts making sure the bolts are down through the driver seat base and through the
slots of the drawer unit.
8mm bolts use 13mm
socket to remove
Under Seat Storage Drawer
IN 688
Owens Products Inc. 1107 Progress Street Sturgis, MI 49091 269-651-2300 Toll-Free:800-726-9367 
Fax: 800-942-9877 www.owensproducts.com sales@owensproducts.com
Product No. TJ15010
Page 2
/